|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
02-01-2008, 08:52 PM
|
#1 |
|
Camaro Club
Join Date: Jun 2007
Location: ohio
Posts: 472
|
i need pics of standard and custom windshield rubber
my truck had the custom rubber with the trim around the windshield when i bought it and when i pulled the windsheild out there was some pitting under the rubber so i just sandblasted it and primed it. My plan was to use the standard rubber when i get a windshield installed but now i'm wandering if it will cover the rust pits or not. So if anyone has some pics i'd like to see how much the custom and the standard windshield rubber covers along the edges.
Thanks JOtt |
|
|
|
02-01-2008, 09:58 PM
|
#2 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: i need pics of standard and custom windshield rubber
The seal's are the same size as far as I know the only differance is the trim cut into the gasket. Here is my custom one.
  I don't have any good pictures of the windshield installed. 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71  Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
02-03-2008, 07:52 AM
|
#3 |
|
Camaro Club
Join Date: Jun 2007
Location: ohio
Posts: 472
|
Re: i need pics of standard and custom windshield rubber
I dont think they are the same because i saw a picture on spraybombs build thread and you can see his standard rubber and it sits back father than my custom did. Does it just depend on the brand?
|
|
|
|
|
02-03-2008, 08:20 AM
|
#4 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: i need pics of standard and custom windshield rubber
That could be. I don't know for sure.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
