wanted front cross brace for 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

muddyole 69 · 02-06-2008, 09:23 AM

need the cross bracing that is in front of the engline x-member my rolling frame did just that into a tree and bent my front brace into a u

so I am on the hunt for a replacement the frame is actually a 71 blazer so let me know what you have and what you need for it and thanks for checking my post Mike

Huck · 02-06-2008, 09:30 AM

Mike, I'm parting out a blazer--will check the front crossmember in the morning to see how decent it is and how difficult it may be to remove--Huck

JimKshortstep4x4 · 02-06-2008, 09:55 AM

I have one if Huck does not.

Jim

muddyole 69 · 02-06-2008, 01:05 PM

thanks guys please keep me informed and I will be glad to get one off of either of you just need the price with shipping Mike

Blue_71 · 02-06-2008, 01:46 PM

and if those two dont work, i have a blazer one here thats already out i can check condition on

**jerry moss** · 02-06-2008, 10:48 PM

FYI- they are same on 2wd and 4wd

JimKshortstep4x4 · 02-07-2008, 09:32 AM

Mike,

Did you hear back from Huck yet?

Jim

Huck · 02-08-2008, 11:28 AM

Mike, my crossmember is pretty well rusted --might opt for a better one. Huck

JimKshortstep4x4 · 02-08-2008, 06:58 PM

Mike,

On the front cross member, $12 plus
shipping. If this works for you, I will get it boxed up and get a shipping cost. Just PM me your address.

Jim

muddyole 69 · 02-09-2008, 03:19 AM

PM sent Jim thank you !!!!

02-06-2008, 09:23 AM	#1
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	wanted front cross brace for 4x4 need the cross bracing that is in front of the engline x-member my rolling frame did just that into a tree and bent my front brace into a u so I am on the hunt for a replacement the frame is actually a 71 blazer so let me know what you have and what you need for it and thanks for checking my post Mike __________________ hav'n fun be'n me

02-06-2008, 09:30 AM	#2
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Re: wanted front cross brace for 4x4 Mike, I'm parting out a blazer--will check the front crossmember in the morning to see how decent it is and how difficult it may be to remove--Huck

02-06-2008, 09:55 AM	#3
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: wanted front cross brace for 4x4 I have one if Huck does not. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

02-06-2008, 01:05 PM	#4
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: wanted front cross brace for 4x4 thanks guys please keep me informed and I will be glad to get one off of either of you just need the price with shipping Mike __________________ hav'n fun be'n me

02-06-2008, 10:48 PM	#6
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,915	Re: wanted front cross brace for 4x4 FYI- they are same on 2wd and 4wd __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

02-07-2008, 09:32 AM	#7
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: wanted front cross brace for 4x4 Mike, Did you hear back from Huck yet? Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

02-08-2008, 11:28 AM	#8
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Re: wanted front cross brace for 4x4 Mike, my crossmember is pretty well rusted --might opt for a better one. Huck

02-08-2008, 06:58 PM	#9
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: wanted front cross brace for 4x4 Mike, On the front cross member, $12 plus shipping. If this works for you, I will get it boxed up and get a shipping cost. Just PM me your address. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

02-09-2008, 03:19 AM	#10
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: wanted front cross brace for 4x4 PM sent Jim thank you !!!! __________________ hav'n fun be'n me

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.