Do you need '64-'66 Chevy Truck Parts?

[LILRED66]

Do you need parts for your 4-5-6 Chevy Truck project? During the process of collecting and fixing up my trucks, I have acquired many good, used OEM parts for 4-5-6 Chevy Trucks. I am able to ship most parts, however, due to size, weight and cost, some parts, like cabs, frames and beds, are not very economical to ship.

Let me know your 4-5-6 Chevy Truck part needs and I will try to take care of it.

[kdrodworks316]

i need the pigtails for the hood marker lights. pm me if you can help. thanks

[LILRED66]

kdrodworks316:

I have several pairs. Do you need the entire park lamp harness or just the pigtails? I have both. I will send you a PM, as well.

[kdrodworks316]

thanks Tony

[jsinor1956]

I do! need two as close to perfecrt doors as I can find. and the same condition divers fender.
jsinor1956@gmail.com
jim Sinor

[LILRED66]

Originally Posted by jsinor1956

I do! need two as close to perfecrt doors as I can find. and the same condition divers fender.
jsinor1956@gmail.com
jim Sinor

Jim:

Thanks for the inquiry. Unfortunately, I don't have any "close to perfect doors and front fenders". I am not sure if these exist and if they do, they are a pretty penny. I do have some good, used door shells and front fenders, as well as, other good, used parts for '60-'66 Chevy/GMC trucks.

Good, used door shells are $175.00, picked up at my shop in Kansas City, KS. I can ship, via UPS-Ground for an additional $60.00.

Good, used front fenders are $175.00, picked up at my shop in Kansas City, KS. I can ship, via UPS-Ground for an additional $45.00.

Thanks for the opportunity and please let me know if I can help you with these items or other good, used '60-'66 Chevy/GMC truck parts in the future.

[LILRED66]

kdrodworks316:

I am shipping the entire front park lamp harness, because I couldn't see cutting the pig tail sockets off a perfectly good harness. It will ship in the next few days. Thanks for your business.

Tony Smith

[LILRED66]

We sell lots of 4-5-6 Chevy Truck parts. Let me know if we can help.

[62 short step]

Tony, how much for a good 60-66 grille support? Shipping also to 70739. Thanks, Jeremy.

P.S. Pics too please.

[LILRED66]

62 short step:

I have a few good, used grille supports. I will send you a PM, with description, price, including shipping and pictures. I don't have the pictures, right now, but I will get them to you soon.

Thanks for your interest.

[arisaka]

Would you happen to have the left and right outside mirror arms for 1966 C10?


Thanks,Jimmy

[UltraRick]

Could you let me know the cost of a drivers door to 40258?
Thanks, Rick

[LILRED66]

arisaka:

Thanks for your interest. Do you need the painted or chrome finish and what style mirror?

UltraRick:

Do you need a driver side door shell or a complete door with inners, glass, vent, door panel, hinges and handles?

[arisaka]

Painted will be fine,rectangular mirror,zipcode for shipping 28560.

Thanks,Jimmy

[LILRED66]

ariska:

Thanks for the prompt reply. I will PM you with information.

[BIGPIMP]

tony i need a 64-66 cab in decent shape my email ashgate20910@aol.com could you send pics please .i know you won't ship ,i'm in texas .

[LILRED66]

BIGPIMP:

Thanks for your inquiry. I have two good, used cabs. One is a small back window, low hump and one is a big back window, low hump. Both were acquired for my projects, so they are in good, used condition. Let me know if you are interested and I can provide prices, picked up at my shop in Kansas City, KS. Attached are photos of the big window cab.

Thanks for your interest and let me know if I can help you with these or other 4-5-6 Chevy Truck parts in the future.

[ron19]

Hey LILRED,

Would you like to sell a main harness out of one of those trucks? After reviewing the wiring in my truck, all I need is the small connector that goes through the firewall to the drive side of the trans tunnel. It only has 3 or 4 wires on it. The other part would be the ignition switch connector, it has about 5 or 6 wires on it. I wouldn't be afraid to splice the connectors to the existing wires, could do that pretty safely. I hate to buy a whole replacement harness for $450+ for just these two parts.

Let me know,

[ron19]

Originally Posted by ron19

Hey LILRED,

Would you like to sell a main harness out of one of those trucks? After reviewing the wiring in my truck, all I need is the small connector that goes through the firewall to the drive side of the trans tunnel. It only has 3 or 4 wires on it. The other part would be the ignition switch connector, it has about 5 or 6 wires on it. I wouldn't be afraid to splice the connectors to the existing wires, could do that pretty safely. I hate to buy a whole replacement harness for $450+ for just these two parts.

Let me know,

Hey LILRED, do you think you have this?

[joe231]

hey red, i need a fleet tail light harness. thanks

[joe231]

oh and a chevy headlight harness, thanks

[joe231]

Do you have any?

[LILRED66]

joe231:

Thanks for the inquiry. I have a headlight harness and a rear tail light harness for a fleetside. I am doing the World of Wheels show in Kansas City Friday through Sunday, so I have not been doing truck parts stuff, in preparation for the show. I will be back in the saddle on Monday, so I can check my inventory.

Thanks for your interest and patience. I will get back with you regarding these harnesses and thanks for your interest.

[joe231]

Ok, thanks Tony!
Is your inventory used stuff, or nos stuff too?
Joe

[LILRED66]

joe231:

All of my parts are good, used OEM parts. I do not sell reproduction or aftermarket stuff. I have acquired a great deal of inventory over the past several years and use the majority of my parts for my projects, however, I do sell a lot of used stuff, also.