|
02-14-2008, 01:22 AM | #1 |
Long Fleet Club
Join Date: Aug 2006
Location: Deer Park, TX
Posts: 5,666
|
Blazer tank hoses
I have been all over the place trying to find a hose that will fit the 1 1/4" inlet.
It is measured in ID and the only hose I can find is the same measurement but isn't flexable enough to slip over the pipe. Where are you finding your fill hoses?
__________________
Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules |
02-14-2008, 01:32 AM | #2 |
Retired Air Force Veteran
Join Date: Aug 2007
Location: Pembroke Pines, Florida 33024
Posts: 1,808
|
Re: Blazer tank hoses
WES at Classic Heartbeat has the hose your looking for. He sells it by the foot. Here's his info.
Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 I purchased mine from a local speed shop in Miami.
__________________
Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors Last edited by myoldchevytruck; 02-14-2008 at 01:33 AM. |
02-14-2008, 01:34 AM | #3 |
Registered User
Join Date: Feb 2001
Location: East Central, MO
Posts: 11,336
|
Re: Blazer tank hoses
The one you need has a very hard and stiff spring that runs through it. I got mine at OReilys and I think they can get about any size you need. Try your different parts stores. It is expensive.
|
02-14-2008, 01:37 AM | #4 |
Long Fleet Club
Join Date: Aug 2006
Location: Deer Park, TX
Posts: 5,666
|
Re: Blazer tank hoses
Oreily's cant seem to locate a Part # for it and I have been to 4 of them around here. Also tryed Auto Zone and Car Quest.
__________________
Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules Last edited by cameeks; 02-14-2008 at 01:37 AM. |
02-14-2008, 01:34 AM | #5 | |
Long Fleet Club
Join Date: Aug 2006
Location: Deer Park, TX
Posts: 5,666
|
Re: Blazer tank hoses
Quote:
Ok I'm trying the old heat it up and strech it trick for now so I can hopfully drive the truck to work insted of the bike. It is 80% chance for rain/storms tonight
__________________
Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules Last edited by cameeks; 02-14-2008 at 01:35 AM. |
|
02-14-2008, 01:37 AM | #6 |
Retired Air Force Veteran
Join Date: Aug 2007
Location: Pembroke Pines, Florida 33024
Posts: 1,808
|
Re: Blazer tank hoses
cameeks, what size is your fill side (not the neck on the tank)?
__________________
Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors |
02-14-2008, 01:39 AM | #7 |
Long Fleet Club
Join Date: Aug 2006
Location: Deer Park, TX
Posts: 5,666
|
Re: Blazer tank hoses
the end with the cap? It is 1 1/2" the same as Hugger's but with a 30 deg. bend.
__________________
Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules |
02-14-2008, 01:44 AM | #8 |
Retired Air Force Veteran
Join Date: Aug 2007
Location: Pembroke Pines, Florida 33024
Posts: 1,808
|
Re: Blazer tank hoses
Mine is 2" and I reduced it down to 1 1/4".
__________________
Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors |
02-14-2008, 01:54 AM | #9 |
Long Fleet Club
Join Date: Aug 2006
Location: Deer Park, TX
Posts: 5,666
|
Re: Blazer tank hoses
I did the same I just cant get the right 1 1/4". The OD of the tank is 1 3/8" and the ID of the hose is 1 1/4"
__________________
Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules |
02-14-2008, 01:57 AM | #10 |
Long Fleet Club
Join Date: Aug 2006
Location: Deer Park, TX
Posts: 5,666
|
Re: Blazer tank hoses
With the wire in the hose it is a little hard to strech it. I had it sitting in running hot water for a bit and it seems to have opened a little. If I get this to work It will be a temp deal until I can get a better peice. I'm planing on one more total tear down of the truck befor I'm done.
__________________
Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules |
02-14-2008, 02:18 AM | #11 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Blazer tank hoses
i've always gotten fuel hose at boat supply places
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
02-14-2008, 02:26 AM | #12 |
Retired Air Force Veteran
Join Date: Aug 2007
Location: Pembroke Pines, Florida 33024
Posts: 1,808
|
Re: Blazer tank hoses
As stated earlier WES has it in stock. He sells both the blazer tank and the fuel ine. So I know it fits. But like Mudder stated, it's pricey. If I remember, he gets about $11.00 a foot.
Here's his number again: Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502
__________________
Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors |
02-14-2008, 04:57 AM | #13 |
Post Whore
Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,686
|
Re: Blazer tank hoses
I bought a line from one of the vendors and unfortunately it was too big. I ended up going to a local rubber hose supply company and they had the exact size in a rubber hose that was speced for fuel delivery in stock. The just cut it to size.
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
02-14-2008, 06:31 AM | #14 |
Registered User
Join Date: Feb 2001
Location: East Central, MO
Posts: 11,336
|
Re: Blazer tank hoses
There are two kinds that will work. One has the spring in it and will bend in a slow 90. The other without the spring is bad for collasping when it is bent. My OReilys stocks the stuff. I guess I could call and see if there is a prt#.
|
02-14-2008, 04:47 PM | #15 |
Long Fleet Club
Join Date: Aug 2006
Location: Deer Park, TX
Posts: 5,666
|
Re: Blazer tank hoses
That will work
__________________
Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules |
02-14-2008, 09:01 PM | #16 |
Registered User
Join Date: Feb 2001
Location: East Central, MO
Posts: 11,336
|
Re: Blazer tank hoses
How much do you need?
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|