Rebuilt/Reman Motors in DFW area? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Zumo · 02-21-2008, 10:42 PM

My nephew has a 86-87 4x4 Blazer theat needs either a rebuild or new motor. Anyone know anywhere in the DFW area? 2.8L V6? not sure. will get more info later.

jsbgump · 02-22-2008, 01:00 AM

City motor supply Is the best inmy opinion

Jonboy · 02-22-2008, 09:39 PM

I have had pretty good luck with Blaine's also. 214.426.4400

LSGarage · 02-23-2008, 09:53 PM

I put a long block in my '86 last winter. A 2.8L, V-6 from a company called Thunderbolt Engines out of Austin, TX. It cost me $900 and I got a $200 core exchange that just about covered the shipping. They were pretty much the only company I could find to supply a '86-'87 2.8L. GM disowned those two years. Hope it helps.

Zumo · 02-24-2008, 12:34 AM

Thanks. Ther is a place in Howe, TX that has one for $600. It's on ebay, I'll post the link if I can.

02-21-2008, 10:42 PM	#1
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	Rebuilt/Reman Motors in DFW area? My nephew has a 86-87 4x4 Blazer theat needs either a rebuild or new motor. Anyone know anywhere in the DFW area? 2.8L V6? not sure. will get more info later. __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles Last edited by Zumo; 02-21-2008 at 10:47 PM.

02-22-2008, 01:00 AM	#2
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Rebuilt/Reman Motors in DFW area? City motor supply Is the best inmy opinion __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

02-22-2008, 09:39 PM	#3
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Rebuilt/Reman Motors in DFW area? I have had pretty good luck with Blaine's also. 214.426.4400

02-23-2008, 09:53 PM	#4
LSGarage Registered User Join Date: Aug 2005 Location: Mechanicsburg, PA Posts: 86	Re: Rebuilt/Reman Motors in DFW area? I put a long block in my '86 last winter. A 2.8L, V-6 from a company called Thunderbolt Engines out of Austin, TX. It cost me $900 and I got a $200 core exchange that just about covered the shipping. They were pretty much the only company I could find to supply a '86-'87 2.8L. GM disowned those two years. Hope it helps. __________________ 67 GMC 4x4, 305 V-6, 4-spd 86 S-10, 2.8 2WD LWB 01 Suburban (family hauler) 13 Honda CRV (wife's wheels) 03 Malibu (daughter’s car)

02-24-2008, 12:34 AM	#5
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	Re: Rebuilt/Reman Motors in DFW area? Thanks. Ther is a place in Howe, TX that has one for $600. It's on ebay, I'll post the link if I can. __________________ 1968 C10 LWB **SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.