59 panel truck ? on alot of stuff - The 1947 - Present Chevrolet & GMC Truck Message Board Network

malibu795 · 02-26-2008, 10:51 PM

59 3/4 ton with w 9600GVW weight rating pacific body on it. straight frame naturally

manualy steering is shot... box manly.. planing on going to power steering... i saw borthers swap/upgrade and read what they did. any one got some pointers? or did brother cover majority of it?

brakes the previos owner re-did 3 out of 4 wheel cylinders and new master cylinder. it has what looks like a bastardized vacuum boost over hyd setup on the the pass side. it does lock up all 4 wheel on med- heavy pedal pressure... i want to convert to dual chamber MC for saftey reasons and convert to hydroboost so i can keep my manual tranny.....

it also has an eaton rear end... are there any code on the housing to dipic gears and dif setup?
i also heard the gm 14bolt brake hubs, carrier and axle shaft will fit inside? i would like to put soem dually drums on the back.. (13x3" brake shoes vs the 13x2" shoes.

leave springs... were can i get new eye bushings?

thanks adam

malibu795 · 02-27-2008, 09:42 PM

did i ask some off the wall question?

55dude · 02-29-2008, 06:01 AM

no! check with the filling station or your local leaf spring builder.

malibu795 · 03-01-2008, 10:34 PM

Quote:

Originally Posted by 55dude

no! check with the filling station or your local leaf spring builder.

pic im working it... laptop got stolen 3 weeks ago so things are slow

malibu795 · 03-04-2008, 10:19 AM

here you go with a picture

vin is 3G 59 O 119361
trim STD
paint 718A
GVW 9600

the LMC catollog only goes to 3E for 3600 is 38 a 1 1/4 ton?

malibu795 · 03-04-2008, 11:19 AM

forgot to mention it got 17.5" rims up front and 16" split rims out back

dan42 · 02-29-2008, 08:32 PM

Let's see some pictures!!

Daniel U · 03-04-2008, 11:59 AM

Quote:

Originally Posted by malibu795

manualy steering is shot... box manly.. planing on going to power steering... i saw borthers swap/upgrade and read what they did. any one got some pointers? or did brother cover majority of it?

Do you plan on clipping the front end with IFS?

brakes the previos owner re-did 3 out of 4 wheel cylinders and new master cylinder. it has what looks like a bastardized vacuum boost over hyd setup on the the pass side. it does lock up all 4 wheel on med- heavy pedal pressure... i want to convert to dual chamber MC for saftey reasons and convert to hydroboost so i can keep my manual tranny.....

Do the brakes 1st IMO. Better to be able stop than go and crash.

it also has an eaton rear end... are there any code on the housing to dipic gears and dif setup?
i also heard the gm 14bolt brake hubs, carrier and axle shaft will fit inside? i would like to put soem dually drums on the back.. (13x3" brake shoes vs the 13x2" shoes.

Dunno, should be a tag on the pumpkin though.

leave springs... were can i get new eye bushings?

Already answered

thanks adam

N/P Daniel U
BTW, what are the rest of your plans for the panel before we give you anymore suggestions? It may help us answer you better. Again we love pics! hint-hint, nudge-nudge!

malibu795 · 03-05-2008, 04:54 AM

Quote:

Originally Posted by Daniel U

N/P Daniel U
BTW, what are the rest of your plans for the panel before we give you anymore suggestions? It may help us answer you better. Again we love pics! hint-hint, nudge-nudge!

put it back to work.. 454/sm465 is most likely going in the truck. got to do something about the 5.13 gears out back might update to a 10.5" 14bolt corpate axle with 4.10 gears. not that antyhing is wrong with the eaton that is in there.
when money promits ZF650 6 speed tranny

thing already on the to do list
electric wiper conversion
dual master cyl conversion with update hydroboost at a later date
power steering... gut feeling say i have a 1/2 manual steering box
get the pass door worrking and long with the driver side door rebuild the frames.
update tie rods ends
front wheel bearings? dont know if they are ball bearings/ roller bearing or tapered bearings but i can hear them when it was ona lift saturday.
75% of hte grease zerts wont take grease

the A pillar is ginda gone on the truck pass side the is the biggest rust spots.

malibu795 · 03-05-2008, 07:00 AM

here are some pictures

malibu795 · 03-05-2008, 07:02 AM

some more

suck only cna load 5 at a time

Daniel U · 03-08-2008, 10:48 PM

Thnx for the pics! Looks like a sweet ride for a work truck!

02-26-2008, 10:51 PM	#1
malibu795 Registered User Join Date: Feb 2008 Location: oxnard, ca Posts: 189	59 panel truck ? on alot of stuff 59 3/4 ton with w 9600GVW weight rating pacific body on it. straight frame naturally manualy steering is shot... box manly.. planing on going to power steering... i saw borthers swap/upgrade and read what they did. any one got some pointers? or did brother cover majority of it? brakes the previos owner re-did 3 out of 4 wheel cylinders and new master cylinder. it has what looks like a bastardized vacuum boost over hyd setup on the the pass side. it does lock up all 4 wheel on med- heavy pedal pressure... i want to convert to dual chamber MC for saftey reasons and convert to hydroboost so i can keep my manual tranny..... it also has an eaton rear end... are there any code on the housing to dipic gears and dif setup? i also heard the gm 14bolt brake hubs, carrier and axle shaft will fit inside? i would like to put soem dually drums on the back.. (13x3" brake shoes vs the 13x2" shoes. leave springs... were can i get new eye bushings? thanks adam __________________ -A DAM WILD MAN- 59 apache pannel truck 38 I-6/sm420 79 malibu wagon 305/t56 02 2500hd duramax/allision 1/4 13.82 @100 mph efi live and built tranny 500hp 383 on the engine stand U.S. Navy 2000-Current Peace through Superior Firepower Horsepower = Condom.....I would rather have it and not need it than to need it and not have it

02-27-2008, 09:42 PM	#2
malibu795 Registered User Join Date: Feb 2008 Location: oxnard, ca Posts: 189	Re: 59 panel truck ? on alot of stuff did i ask some off the wall question? __________________ -A DAM WILD MAN- 59 apache pannel truck 38 I-6/sm420 79 malibu wagon 305/t56 02 2500hd duramax/allision 1/4 13.82 @100 mph efi live and built tranny 500hp 383 on the engine stand U.S. Navy 2000-Current Peace through Superior Firepower Horsepower = Condom.....I would rather have it and not need it than to need it and not have it

02-29-2008, 06:01 AM	#3
55dude Registered User Join Date: Jan 2007 Location: tacoma wa. Posts: 1,037	Re: 59 panel truck ? on alot of stuff no! check with the filling station or your local leaf spring builder.

03-04-2008, 10:19 AM	#5
malibu795 Registered User Join Date: Feb 2008 Location: oxnard, ca Posts: 189	Re: 59 panel truck ? on alot of stuff here you go with a picture vin is 3G 59 O 119361 trim STD paint 718A GVW 9600 the LMC catollog only goes to 3E for 3600 is 38 a 1 1/4 ton? Attached Images __________________ -A DAM WILD MAN- 59 apache pannel truck 38 I-6/sm420 79 malibu wagon 305/t56 02 2500hd duramax/allision 1/4 13.82 @100 mph efi live and built tranny 500hp 383 on the engine stand U.S. Navy 2000-Current Peace through Superior Firepower Horsepower = Condom.....I would rather have it and not need it than to need it and not have it

03-04-2008, 11:19 AM	#6
malibu795 Registered User Join Date: Feb 2008 Location: oxnard, ca Posts: 189	Re: 59 panel truck ? on alot of stuff forgot to mention it got 17.5" rims up front and 16" split rims out back __________________ -A DAM WILD MAN- 59 apache pannel truck 38 I-6/sm420 79 malibu wagon 305/t56 02 2500hd duramax/allision 1/4 13.82 @100 mph efi live and built tranny 500hp 383 on the engine stand U.S. Navy 2000-Current Peace through Superior Firepower Horsepower = Condom.....I would rather have it and not need it than to need it and not have it

02-29-2008, 08:32 PM	#7
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: 59 panel truck ? on alot of stuff Let's see some pictures!! __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

03-05-2008, 07:00 AM	#10
malibu795 Registered User Join Date: Feb 2008 Location: oxnard, ca Posts: 189	Re: 59 panel truck ? on alot of stuff here are some pictures Attached Images __________________ -A DAM WILD MAN- 59 apache pannel truck 38 I-6/sm420 79 malibu wagon 305/t56 02 2500hd duramax/allision 1/4 13.82 @100 mph efi live and built tranny 500hp 383 on the engine stand U.S. Navy 2000-Current Peace through Superior Firepower Horsepower = Condom.....I would rather have it and not need it than to need it and not have it

03-05-2008, 07:02 AM	#11
malibu795 Registered User Join Date: Feb 2008 Location: oxnard, ca Posts: 189	Re: 59 panel truck ? on alot of stuff some more suck only cna load 5 at a time Attached Images __________________ -A DAM WILD MAN- 59 apache pannel truck 38 I-6/sm420 79 malibu wagon 305/t56 02 2500hd duramax/allision 1/4 13.82 @100 mph efi live and built tranny 500hp 383 on the engine stand U.S. Navy 2000-Current Peace through Superior Firepower Horsepower = Condom.....I would rather have it and not need it than to need it and not have it

03-08-2008, 10:48 PM	#12
Daniel U Registered User Join Date: Oct 2006 Location: Central Coast, CA. Posts: 1,202	Re: 59 panel truck ? on alot of stuff Thnx for the pics! Looks like a sweet ride for a work truck! __________________ Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674 My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost 1960 (400/T350/?) Apache 10 short/fleet side-big window 1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4 2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB Doing my part to warm the globe

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.