Grant wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

greasemonkey · 10-24-2002, 09:30 PM

Just wanted to let everyone know that I installed my new Grant wheel today. I just followed the instructions on the kit and it went on fine. Everything works-horn, turn signals, and all the lights. I was doing some searching on the board and found all your "horror stories" about Grant installation kits so I am kind of relieved it is on with no problems. I really like the look it gives the truck, and it is not harder to turn with manual steering because of the thickness and the rubber. Anyway, thanks to everyone who recommended this wheel to me.

DanoDMano · 10-25-2002, 01:06 AM

What model of wheel did you settle on?? I've looked at a few but haven't found one that looked quite right??

70c10 · 10-25-2002, 07:49 AM

I still haven't figured out the horn thing on my Challenger 440 model. It kills the battery.

67cst · 10-25-2002, 10:23 AM

Dan the one im getting and i personally think looks awesome is the woodgrain one with the blue horn cap and has a white bowtie....i priced em out and they are like 110 american or 160 cdn, oh also its like a 3 spoke...one sec i might have a pic

yellowgmc · 10-25-2002, 10:51 AM

i put a grant on my gmc this summer. best mod i've done yet. actually it's the only mod i've done yet, but that'll change. he, he ,he!!!

imaindianoutlaw · 10-25-2002, 12:59 PM

71 ss thats the one I want with the gmc center though

**basketcase** · 10-25-2002, 01:31 PM

I like that one too. Has anyone used the foam rimmed wheel?

Tom

70c10 · 10-25-2002, 01:33 PM

My Challenger is a foam grip.

greasemonkey · 10-25-2002, 05:31 PM

I got this one. Actually, mine has a black button with a red bowtie, and I like the effect a lot.

Longhorn Man · 10-26-2002, 12:00 AM

YEp...that is the one I want too!

caa332 · 10-26-2002, 02:56 AM

i got a grant and i have been nothing but frustrated...... the first one i got, ( not grants fault, but autozones, ) didnt have all the pieces, so i took it back...... i got the one for a 69 gmc and i dont think there is a thing about it that fits, so im going back tomorrow to try and get the right one again.,... if it dont fit the hell with it..... ill try something different

Project1970 · 10-26-2002, 03:58 AM

I got mine on no problem...quite frankly, I really don't see where the problems come up, unless you've got a seriously buggered column. My only "problems" were both getting the kit in stock, clearancing the column sleeve a bit...hmm, I just thought of something...and dealing with really bad column bearings (I had to change the order of installation a bit because the bearings try to pop out otherwise).

Anyway...I'm gonna start another poll for the thought I just had.

crazy longhorn · 10-26-2002, 07:01 AM

Here is the one that found its way into my longhorn ,& no problems with horn http://store.summitracing.com/partde...57#largerimage

10-24-2002, 09:30 PM	#1
greasemonkey Registered User Join Date: Dec 2001 Location: Pace, FL Posts: 2,155	Grant wheels Just wanted to let everyone know that I installed my new Grant wheel today. I just followed the instructions on the kit and it went on fine. Everything works-horn, turn signals, and all the lights. I was doing some searching on the board and found all your "horror stories" about Grant installation kits so I am kind of relieved it is on with no problems. I really like the look it gives the truck, and it is not harder to turn with manual steering because of the thickness and the rubber. Anyway, thanks to everyone who recommended this wheel to me. __________________ 1942 Master Deluxe 1969 C/10 1985 Blazer CUCV 1987 Jimmy 2004 Tahoe 2005 Silverado 1500 2005 Silverado 3500

10-25-2002, 01:06 AM	#2
DanoDMano Pronounced "Pew-al-up" Join Date: Oct 2002 Location: Puyallup, Washington Posts: 845	Wheel What model of wheel did you settle on?? I've looked at a few but haven't found one that looked quite right?? __________________ Classic GM Trucks of Washington Club Member 1970 FS chevy,350/350, Edelbrock cam and intake. Holley 650 carb,HEI,AT,Tangier Orange, 18's, Power Locks, Truck Photos

10-25-2002, 07:49 AM	#3
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	I still haven't figured out the horn thing on my Challenger 440 model. It kills the battery. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

10-25-2002, 10:23 AM	#4
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,303	Dan the one im getting and i personally think looks awesome is the woodgrain one with the blue horn cap and has a white bowtie....i priced em out and they are like 110 american or 160 cdn, oh also its like a 3 spoke...one sec i might have a pic Attached Images __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

10-25-2002, 10:51 AM	#5
yellowgmc Getting cabin fever?!?!?! Join Date: Oct 2002 Location: chisholm, mn Posts: 1,679	i put a grant on my gmc this summer. best mod i've done yet. actually it's the only mod i've done yet, but that'll change. he, he ,he!!! __________________ Member of the Discs Up Front Club 1972 GMC 1500 1994 F-150 XL 4x4 Tact is for people not whitty enough to be sarcastic

10-25-2002, 12:59 PM	#6
imaindianoutlaw GMC SHORT FLEET F/S Join Date: Jun 2000 Location: SOUTH WILLIAMSPORT PENNSYLVANNIA Posts: 2,117	71 ss thats the one I want with the gmc center though __________________ CHARLES WADE HEIN HVACR FOREMAN. LEWISBURG U.S.P.

10-25-2002, 01:31 PM	#7
basketcase Senior Member Join Date: Oct 2001 Location: Edgerton OH USA Posts: 633	I like that one too. Has anyone used the foam rimmed wheel? Tom __________________ '69 swb stepside in progress. '59 Corvette lifetime project

10-25-2002, 01:33 PM	#8
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	My Challenger is a foam grip. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

10-25-2002, 05:31 PM	#9
greasemonkey Registered User Join Date: Dec 2001 Location: Pace, FL Posts: 2,155	I got this one. Actually, mine has a black button with a red bowtie, and I like the effect a lot. __________________ 1942 Master Deluxe 1969 C/10 1985 Blazer CUCV 1987 Jimmy 2004 Tahoe 2005 Silverado 1500 2005 Silverado 3500

10-26-2002, 12:00 AM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	YEp...that is the one I want too!

10-26-2002, 02:56 AM	#11
caa332 Registered User Join Date: Sep 2002 Location: fort collins Posts: 27	i got a grant and i have been nothing but frustrated...... the first one i got, ( not grants fault, but autozones, ) didnt have all the pieces, so i took it back...... i got the one for a 69 gmc and i dont think there is a thing about it that fits, so im going back tomorrow to try and get the right one again.,... if it dont fit the hell with it..... ill try something different __________________ 69 gmc 350/350 in colorful colorado

10-26-2002, 03:58 AM	#12
Project1970 14.1 @ 96MPH Join Date: Jul 2001 Location: Mesa, AZ Posts: 2,811	I got mine on no problem...quite frankly, I really don't see where the problems come up, unless you've got a seriously buggered column. My only "problems" were both getting the kit in stock, clearancing the column sleeve a bit...hmm, I just thought of something...and dealing with really bad column bearings (I had to change the order of installation a bit because the bearings try to pop out otherwise). Anyway...I'm gonna start another poll for the thought I just had. __________________ Project1970 - LS1 Swap Complete!

10-26-2002, 07:01 AM	#13
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	Here is the one that found its way into my longhorn ,& no problems with horn http://store.summitracing.com/partde...57#largerimage

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.