custom fuel filler hosea - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMC3 · 03-11-2008, 04:06 AM

probably going to mount my fuel filler behind the side marker light or weld in a side door from a later model. question is whatever i do it wont line up with a stock style rubber hose, where do I get the hose to go from my filler neck to the tank? thank you

wibilly · 03-11-2008, 05:50 AM

i made the majority of mine with muffler pipe and bought a foot of filler hose at o'rielys. it was $17 a foot so plan it well

myoldchevytruck · 03-11-2008, 06:18 AM

I'm in the process of doing this. The following mod is done by using a later model (1997+up) S-10 Fuel Neck and same years S-10 gas door for the hinge.

If using the Poly Blazer tank, you should be able to use either driver or passenger side. I am using the driver side marker light. Many board members have refered to Tennmans setup for this modification. He also uses the drivers side. Here is his link for a step by step how-to of this mod. Thanks to board member jorgensensc for posting this:

http://67-72chevytrucks.com/vboard/s...ad.php?t=77104

I think your inlet on your tank is 1 1/4 inch and the S-10 fuel neck is 2 inch. Here's how I reduced my Fuel neck. 2 inch reducer to 1 1/2 inch then 1 1/2 inch to 1 1/4 inch Now use 1 1/4 inch fuel line between to tank and fuel neck. Here's a pic of the copper hardware I'm using:

I am not finished yet so I do not have any pics yet. PS That hole in the back of the d/s fender has been filled

Good Luck

Harry

If you have questions, PM your number.

fishingjred73 · 03-23-2008, 10:43 PM

[QUOTE=myoldchevytruck;2619801]I'm in the process of doing this. The following mod is done by using a later model (1997+up) S-10 Fuel Neck and same years S-10 gas door for the hinge.

If using the Poly Blazer tank, you should be able to use either driver or passenger side. I am using the driver side marker light. Many board members have refered to Tennmans setup for this modification. He also uses the drivers side. Here is his link for a step by step how-to of this mod. Thanks to board member jorgensensc for posting this:

http://67-72chevytrucks.com/vboard/s...ad.php?t=77104

Linky no worky

myoldchevytruck · 03-23-2008, 11:48 PM

Fishingjred,
Try this link on the fuel filler mod

http://67-72chevytrucks.com/vboard/s...ad.php?t=77104

fishingjred73 · 03-24-2008, 02:42 AM

Thanks, much better.

Brad · 03-11-2008, 11:17 AM

Harry, check to be sure that copper doesn't corrode when using 10% or higher ethanol gasoline. IIRC, it does and could cause problems for you.

03-11-2008, 04:06 AM	#1
GMC3 Registered User Join Date: Aug 2002 Location: philadelphia Posts: 62	custom fuel filler hosea probably going to mount my fuel filler behind the side marker light or weld in a side door from a later model. question is whatever i do it wont line up with a stock style rubber hose, where do I get the hose to go from my filler neck to the tank? thank you

03-11-2008, 05:50 AM	#2
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: custom fuel filler hosea i made the majority of mine with muffler pipe and bought a foot of filler hose at o'rielys. it was $17 a foot so plan it well __________________ common sense isn't so common anymore

03-11-2008, 06:18 AM	#3
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	Re: custom fuel filler hosea I'm in the process of doing this. The following mod is done by using a later model (1997+up) S-10 Fuel Neck and same years S-10 gas door for the hinge. If using the Poly Blazer tank, you should be able to use either driver or passenger side. I am using the driver side marker light. Many board members have refered to Tennmans setup for this modification. He also uses the drivers side. Here is his link for a step by step how-to of this mod. Thanks to board member jorgensensc for posting this: http://67-72chevytrucks.com/vboard/s...ad.php?t=77104 I think your inlet on your tank is 1 1/4 inch and the S-10 fuel neck is 2 inch. Here's how I reduced my Fuel neck. 2 inch reducer to 1 1/2 inch then 1 1/2 inch to 1 1/4 inch Now use 1 1/4 inch fuel line between to tank and fuel neck. Here's a pic of the copper hardware I'm using: I am not finished yet so I do not have any pics yet. PS That hole in the back of the d/s fender has been filled Good Luck Harry If you have questions, PM your number. __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors

03-23-2008, 10:43 PM	#4
fishingjred73 Registered User Join Date: May 2007 Location: LOUISIANA Posts: 812	Re: custom fuel filler hosea [QUOTE=myoldchevytruck;2619801]I'm in the process of doing this. The following mod is done by using a later model (1997+up) S-10 Fuel Neck and same years S-10 gas door for the hinge. If using the Poly Blazer tank, you should be able to use either driver or passenger side. I am using the driver side marker light. Many board members have refered to Tennmans setup for this modification. He also uses the drivers side. Here is his link for a step by step how-to of this mod. Thanks to board member jorgensensc for posting this: http://67-72chevytrucks.com/vboard/s...ad.php?t=77104 Linky no worky

03-23-2008, 11:48 PM	#5
myoldchevytruck Retired Air Force Veteran Join Date: Aug 2007 Location: Pembroke Pines, Florida 33024 Posts: 1,808	Re: custom fuel filler hosea Fishingjred, Try this link on the fuel filler mod http://67-72chevytrucks.com/vboard/s...ad.php?t=77104 __________________ Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors

03-24-2008, 02:42 AM	#6
fishingjred73 Registered User Join Date: May 2007 Location: LOUISIANA Posts: 812	Re: custom fuel filler hosea Thanks, much better.

03-11-2008, 11:17 AM	#7
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,672	Re: custom fuel filler hosea Harry, check to be sure that copper doesn't corrode when using 10% or higher ethanol gasoline. IIRC, it does and could cause problems for you. __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.