|
04-03-2008, 04:30 AM | #1 |
Registered User
Join Date: Mar 2006
Location: Pittsburgh
Posts: 1,694
|
Project Blue Goose
1967 Shortfleet V8 283 - 4 speed original one owner truck from New Mexico.
Last edited by nds1968; 02-17-2012 at 09:30 PM. |
04-10-2008, 04:55 AM | #2 |
Registered User
Join Date: Apr 2008
Location: Angleton, TX
Posts: 2,219
|
Re: Project Blue Goose
Thats a really nice original truck you have there. Should make for an easy resto. You going back original or are you restoring it?
|
04-10-2008, 04:56 AM | #3 |
Registered User
Join Date: Apr 2008
Location: Angleton, TX
Posts: 2,219
|
Re: Project Blue Goose
Sorry; I meant to say are you going back original or are you customizing it?
|
04-11-2008, 03:49 AM | #4 |
Registered User
Join Date: Mar 2006
Location: Pittsburgh
Posts: 1,694
|
Re: Project Blue Goose
I am going to keep it mostly stock. No body modifications but I am putting on lowered spindles and dropping the rear between 3-4 inches. I have new chrome bumpers, aluminum grill pieces and the stock mirror for the drivers door. No more western style mirrors. I am going to run the stock hubcaps on wider rims though. Just haven't decided what color to paint the rims, white like the hubcaps or body color. They were originally black from the factory.
|
04-11-2008, 05:33 AM | #5 |
I'm a poor spectator
Join Date: Aug 2006
Location: San Antonio, Tx
Posts: 2,287
|
Re: Project Blue Goose
That is really nice, I like the 67's better than the 68's.
__________________
2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!! |
04-11-2008, 07:04 AM | #6 |
Still livin the "dream" in '54
Join Date: Nov 2006
Location: Tucson, AZ
Posts: 2,656
|
Re: Project Blue Goose
'67's are sweeeeet. Nice starter truck, too bad it's not a step-side!
Keep up the good work... Don
__________________
Current build. 1954 Chevrolet 3800 "Ella" SOLD! My '67 stepper "Tangerine Dream" "Anything worth doing is worth doing right" James Dean “When you have eliminated all which is impossible, then whatever remains, however improbable, must be the truth.” Sherlock Holmes "There is no spoon." Neo |
04-11-2008, 05:53 AM | #7 |
*---------------*
Join Date: Mar 2008
Location: Central Missouri
Posts: 1,791
|
Re: Project Blue Goose
That's going to be one slick truck the way it's going.
__________________
2001 GMC SIERRA 1956 Chevy Panel Build Page with a Scott's Hotrods IFS 1953 Chevy trucks Project Dime Time 1968 Camaro 1968 Volksrod "NOBACK" Jared |
04-12-2008, 03:36 AM | #8 |
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Re: Project Blue Goose
Wow... what a great looking project!
__________________
-Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) |
04-12-2008, 04:09 AM | #9 |
Registered User
Join Date: Apr 2008
Location: Angleton, TX
Posts: 2,219
|
Re: Project Blue Goose
That is going to be very nice when its done. Youre doing exactly what I would if it were mine. Minor mods and improvements, but overall leaving the truck true to its original form. Also I hate finding out panels dont want to go back on the way they came off AFTER getting everything painted, a real pain. Now I mock up the panels on every step and it helps out with final assemply.
|
04-12-2008, 04:25 AM | #10 |
Registered User
Join Date: Dec 2007
Location: Odessa, Texas
Posts: 212
|
Re: Project Blue Goose
I like the color too. Looks great.
__________________
1950 Chevy 3100 Ramp Bed 1-ton http://67-72chevytrucks.com/vboard/s...d.php?t=749386 1965 Chevy Step Side 1971 Chevy Short Wide Bed http://67-72chevytrucks.com/vboard/s...d.php?t=277191 1971 Chevy C-30 1-ton 1971 Chevy Chevelle 1972 Chevrolet C-30 1 ton 2005 Dodge Ram 2500 5.9 Cummins 2017 Fleetwood Pace Arrow 35M motorhome 350 Cummins 2020 Jeep Wrangler Unlimited Rubicon |
04-12-2008, 05:20 AM | #11 |
Registered User
Join Date: Sep 2007
Location: Stoughton, MA
Posts: 6
|
Re: Project Blue Goose
looks awesome, can't wait to see this one done. Like rolling off the factory floor years ago.
|
04-13-2008, 03:08 AM | #12 |
Registered User
Join Date: Mar 2006
Location: Pittsburgh
Posts: 1,694
|
Re: Project Blue Goose
Here are a few more pics of the bed.
|
04-13-2008, 03:13 AM | #13 |
Registered User
Join Date: Mar 2006
Location: Pittsburgh
Posts: 1,694
|
Re: Project Blue Goose
Here are a few more pics.
|
04-16-2008, 03:21 AM | #14 |
Registered User
Join Date: Mar 2006
Location: Pittsburgh
Posts: 1,694
|
Re: Project Blue Goose
Buffed and polished the outside quarters and tailgate today after work. I had help from a co-worker so it only took 2 hours. Looks awesome turned out pretty nice for a welder like myself doing all of the body work and paint.
I had to paint the bulkhead, outside quarters, one wheel house twice. The other wheel house and tailgate got painted three times. I will be an expert by the time this truck is finished. I am going to install the lights and wiring then the bed will be put into storage at my uncle's house. I'm going to tackle the front clip next. I am going to take a month off first though and do some quad riding and get my bike ready for some cruising. Last edited by nds1968; 02-17-2012 at 09:36 PM. |
04-18-2008, 03:32 AM | #15 |
Registered User
Join Date: Mar 2006
Location: Pittsburgh
Posts: 1,694
|
Re: Project Blue Goose
Finally finished the bed after 16 months. I did take a break from May til' November though. I put the light housings, new wiring harness, and NOS light lens with new gaskets and stainless screws.
My uncle pick me up four more hubcaps from last week when he went to Lowes Motor Speedway. All four were 20 dollars, two of them are really nice. |
04-18-2008, 04:04 AM | #16 |
Registered User
Join Date: Jun 2007
Location: Saskatoon, Saskatchewan,:
Posts: 2,901
|
Re: Project Blue Goose
i went and checked my factory gate and it sticks out at least an 1/8 of an inch, hits the bump stops and everything, no adjustment can be made unless i modify the truck which is what i will do later.
__________________
James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587 |
04-18-2008, 07:51 PM | #17 |
Registered User
Join Date: Sep 2007
Location: Stoughton, MA
Posts: 6
|
Re: Project Blue Goose
looks awesome, makes me really want to pick one up and make completely factory looking.
|
04-18-2008, 08:18 PM | #18 |
KEEP ON TRUCKIN'
Join Date: Jun 2005
Location: Sterling, Va.
Posts: 5,730
|
Re: Project Blue Goose
That is a beautiful job. Your truck puts inspiration in the air.
__________________
JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Project http://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER" |
04-18-2008, 10:39 PM | #19 |
Registered User
Join Date: Mar 2004
Location: CA
Posts: 2,057
|
Re: Project Blue Goose
|
04-18-2008, 11:10 PM | #20 |
Registered User
Join Date: Aug 2007
Location: pittsburgh pa
Posts: 1,970
|
Re: Project Blue Goose
Looks great! What part of the Burg you from? Do you hit any local cruises?
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile |
04-19-2008, 01:21 AM | #21 |
Registered User
Join Date: Mar 2006
Location: Pittsburgh
Posts: 1,694
|
Re: Project Blue Goose
Thanks guys it was a lot of work to get to this point.
It's already to go sitting on the trailer. I can't stop taking pictures! I hope to be finished with the truck around Labor day of 2009 to be realistic. Last edited by nds1968; 02-17-2012 at 09:37 PM. |
04-05-2009, 09:30 PM | #22 |
Registered User
Join Date: Aug 2006
Location: PA
Posts: 241
|
Re: Project Blue Goose
I think I have a set of nos cap like those in a box (somewhere).I'll have to check your truck out sometime I'm in the burg
|
01-26-2017, 09:24 PM | #23 |
Registered User
Join Date: Apr 2009
Location: york, pa
Posts: 141
|
Re: Project Blue Goose
My truck |
01-29-2017, 11:10 PM | #24 | |
Registered User
Join Date: Mar 2006
Location: Pittsburgh
Posts: 1,694
|
Re: Project Blue Goose
Quote:
__________________
Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers |
|
01-29-2017, 11:24 PM | #25 |
Registered User
Join Date: Mar 2006
Location: Pittsburgh
Posts: 1,694
|
Re: Project Blue Goose
I've been thinking about how to approach finishing the truck. When I spoke with Boris we discussed repairing the cab rust, painting the firewall and using Lizard Skin on the underside of the cab.
I would then be able to mount the cab back onto the frame. This is where I don't know how I want to proceed with the build. I've been contemplating just putting the truck back together and driving it. Boris suggested faux patina the bed so that it matches the front of the truck. I am going to paint the core support and inner fenders satin black and would like to detail the engine. If the budget allows I would like to paint the interior but that's a big maybe. I'm just typing out my thoughts
__________________
Nate 1967 short fleet Project Blue Goose 'If it don't bounce back... heeheehee you go hungry!" Blues Brothers |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|