Poll: Which billet/machined parts would you most likely be interested in? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mahanian · 04-19-2008, 07:36 PM

So, based on feedback from this thread:

http://67-72chevytrucks.com/vboard/s...97#post2684497

I have compliled a list of billet items that some people are interested in for our trucks. Because I have no idea about the costs involved I'm only going to work on 2 pieces. I'd like to take a poll and see which 2 items that people are most interested in. I'm NOT starting a business, I'm only going to have one batch of each part made and the more people that are interested, the cheaper they will be because I'll be able to spread the development costs over more units.

If you have additional items that I didn't list, please post them on the thread listed above.

70' GMC · 04-19-2008, 07:51 PM

Hood Hinges (Stock bolt location for now)
Windshield Wiper Arms
Outside door handles
Exterior Trim

Is what Im interested in

View Poll Results: What billet part are you most interested in?
Radio Plate	7	53.85%
Bowtie for Grill/Hood	2	15.38%
Hood Hinges (Stock bolt location for now)	4	30.77%
Windshield Wiper Arms	2	15.38%
67 Rearview Mirror	2	15.38%
Outside door handles	1	7.69%
Defrost Vent	4	30.77%
Exterior Trim	2	15.38%
Multiple Choice Poll. Voters: 13. You may not vote on this poll

04-19-2008, 07:36 PM	#1
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Poll: Which billet/machined parts would you most likely be interested in? So, based on feedback from this thread: http://67-72chevytrucks.com/vboard/s...97#post2684497 I have compliled a list of billet items that some people are interested in for our trucks. Because I have no idea about the costs involved I'm only going to work on 2 pieces. I'd like to take a poll and see which 2 items that people are most interested in. I'm NOT starting a business, I'm only going to have one batch of each part made and the more people that are interested, the cheaper they will be because I'll be able to spread the development costs over more units. If you have additional items that I didn't list, please post them on the thread listed above. __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

04-19-2008, 07:51 PM	#2
70' GMC HERE.......Somewhere Join Date: Oct 2006 Location: Birmingham AL Posts: 2,488	Re: Poll: Which billet/machined parts would you most likely be interested in? Hood Hinges (Stock bolt location for now) Windshield Wiper Arms Outside door handles Exterior Trim Is what Im interested in __________________ Current rides: 2013 Hyundai elantra gt DD 1995 camaro my first crush lmao Was: 1970 with a 350 4barrel and 288 horses Classics make it possible!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.