Speedo Swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Palf70Step** · 11-03-2002, 01:14 PM

I currently have the elcheapo idiot light dash pod on my truck, but I am planning on swapping it out for guage cluster. Can I take the speedometer from my current truck and use it in the New cluster? I'd kind of like to keep the original miles and all associated with the stock speedo. Just a little detail I would like to retain.

Is it much to change out the parts with these dash clusters??

Thanks

SNOOP · 11-03-2002, 01:59 PM

Yes, you can but do not plug the guage dash into the none guage wiring harness you will burn something up. You have to change a few wires in the plug. I have a copy of the wiring digram if you would like on were to move the wires.

Longhorn Man · 11-03-2002, 02:57 PM

The Speedo and Fuel guage in my GMC (with optional guages) camr out of the old longhorn witch had the base model anel in it.
DO NOT just plug in the new inst panel to your base guages....you will cray when your fuel guage does about 5 laps around and then quit in a puff of smoke. Also, your dash light s will NOT work properly.

**68 Stepside** · 11-03-2002, 04:04 PM

http://www.gmcpauls.com/Tech%20Tips1.htm

Go down the page just a bit, and you'll see the instructions on converting your existing wiring plug, to a gauge dash plug.

Good luck,

TJ

**Palf70Step** · 11-03-2002, 05:48 PM

Oh yeah..I knew about the wiring. I will probably be redoing all the wiring anyways. A Mississippi Farmer is like sorta like Andy's dope smokin old man when it comes to wiring. I think I would probably feel safer with a new correct harness, then try to redo something I am not sure what was modified in the middle.

11-03-2002, 01:14 PM	#1
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Speedo Swap I currently have the elcheapo idiot light dash pod on my truck, but I am planning on swapping it out for guage cluster. Can I take the speedometer from my current truck and use it in the New cluster? I'd kind of like to keep the original miles and all associated with the stock speedo. Just a little detail I would like to retain. Is it much to change out the parts with these dash clusters?? Thanks __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-03-2002, 01:59 PM	#2
SNOOP Registered User Join Date: Oct 2002 Location: ROGERSVILLE,TN. Posts: 47	Yes, you can but do not plug the guage dash into the none guage wiring harness you will burn something up. You have to change a few wires in the plug. I have a copy of the wiring digram if you would like on were to move the wires. __________________ 1968 GMC FLEETSIDE

11-03-2002, 04:04 PM	#4
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,692	http://www.gmcpauls.com/Tech%20Tips1.htm Go down the page just a bit, and you'll see the instructions on converting your existing wiring plug, to a gauge dash plug. Good luck, TJ __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

11-03-2002, 05:48 PM	#5
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Oh yeah..I knew about the wiring. I will probably be redoing all the wiring anyways. A Mississippi Farmer is like sorta like Andy's dope smokin old man when it comes to wiring. I think I would probably feel safer with a new correct harness, then try to redo something I am not sure what was modified in the middle. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-03-2002, 02:57 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	The Speedo and Fuel guage in my GMC (with optional guages) camr out of the old longhorn witch had the base model anel in it. DO NOT just plug in the new inst panel to your base guages....you will cray when your fuel guage does about 5 laps around and then quit in a puff of smoke. Also, your dash light s will NOT work properly.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.