Clutch neutral safety switch installation - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GM72K10 · 05-13-2008, 04:24 AM

Ok, its been a while since I took the K30 dually apart and its back together on its new frame running again. Before I break this thing a second time, how exactly should this be attached? thanks in advance

GM72K10 · 05-18-2008, 07:53 PM

So no one has a stick shift truck?

Robert1970C20rstbukt · 05-19-2008, 06:04 AM

I was wondering how this truck was coming along! I just checked my '84. I had to remove the plastic and metal lower column cover panels to see it. There's a bracket next to the column that the switch bolts to. It uses a plastic bolt and nut to hold it on and the switch goes on the inside of the bracket next to the column. The J shaped rod should be turned up when installed. I'll try to get a pic of it tomorrow.

GM72K10 · 05-19-2008, 02:11 PM

Thanks!

05-13-2008, 04:24 AM	#1
GM72K10 Next! Join Date: Jan 2003 Location: Eastern Pa. Posts: 2,482	Clutch neutral safety switch installation Ok, its been a while since I took the K30 dually apart and its back together on its new frame running again. Before I break this thing a second time, how exactly should this be attached? thanks in advance Attached Images __________________ 86 K30 CUCV M1028A1 86 K30 CUCV M1028a2 dually 86 K30 C&C 6.2 4:56s, 4M, 11,000 gvw, ex fire truck, now lowboy dump More square bodies and CUCVs than I care to admit to 2020 Silverado K3500HD Work truck

05-18-2008, 07:53 PM	#2
GM72K10 Next! Join Date: Jan 2003 Location: Eastern Pa. Posts: 2,482	Re: Clutch neutral safety switch installation So no one has a stick shift truck? __________________ 86 K30 CUCV M1028A1 86 K30 CUCV M1028a2 dually 86 K30 C&C 6.2 4:56s, 4M, 11,000 gvw, ex fire truck, now lowboy dump More square bodies and CUCVs than I care to admit to 2020 Silverado K3500HD Work truck

05-19-2008, 06:04 AM	#3
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	Re: Clutch neutral safety switch installation I was wondering how this truck was coming along! I just checked my '84. I had to remove the plastic and metal lower column cover panels to see it. There's a bracket next to the column that the switch bolts to. It uses a plastic bolt and nut to hold it on and the switch goes on the inside of the bracket next to the column. The J shaped rod should be turned up when installed. I'll try to get a pic of it tomorrow. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck Last edited by Robert1970C20rstbukt; 05-19-2008 at 06:09 AM.

05-19-2008, 02:11 PM	#4
GM72K10 Next! Join Date: Jan 2003 Location: Eastern Pa. Posts: 2,482	Re: Clutch neutral safety switch installation Thanks! __________________ 86 K30 CUCV M1028A1 86 K30 CUCV M1028a2 dually 86 K30 C&C 6.2 4:56s, 4M, 11,000 gvw, ex fire truck, now lowboy dump More square bodies and CUCVs than I care to admit to 2020 Silverado K3500HD Work truck

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.