home made multi port??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

coggonobrien · 05-23-2008, 04:13 AM

does somebody out there make a simple do it yourself efi kit? I had an idea to take an old tunnel ram and drill/tap the lower runners for fuel injectors then put a pair of dummie carbs on top to act as throttle bodies. Just wondering if there is a kit out there that will let me do this.

thanks, Dave

ed2552 · 05-23-2008, 04:37 AM

That would take a LOT of work, you would have to have the carbs wired up for TPS, etc, that would be a lot more expensive than a regular EFI system

05-23-2008, 04:13 AM	#1
coggonobrien Registered User Join Date: Mar 2008 Location: Coggon, IA Posts: 580	home made multi port??? does somebody out there make a simple do it yourself efi kit? I had an idea to take an old tunnel ram and drill/tap the lower runners for fuel injectors then put a pair of dummie carbs on top to act as throttle bodies. Just wondering if there is a kit out there that will let me do this. thanks, Dave

05-23-2008, 04:37 AM	#2
ed2552 Registered User Join Date: Jan 2007 Location: Charles City IA Posts: 1,626	Re: home made multi port??? That would take a LOT of work, you would have to have the carbs wired up for TPS, etc, that would be a lot more expensive than a regular EFI system __________________ '67 C20, Under the Knife!, LWB, Eaton HO-52, Rear Coil Springs 72' GMC C2500, 350, TH400(?), Dana 60 '67 K10 4-spd., 305, SM465, Dana 44, 12 Bolt, RUST! '65 C60 292, 4 spd, 2 spd Rearend, 15' Grain Box, MINT! 09 Yukon Denali 82k Miles 6.2L/6A

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.