87 chevy 350 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**steelhorse** · 05-28-2008, 12:22 AM

I bought an 87 c10 for the engine and trans.It had a 350 throttle body motor and 700r4 trans.Here is my question, the 87-95 motors all seem to have different heads and intake.Are these heads any good?If not can you use the 55-86 heads and intake,or the later vortec style heads and intake.Im not looking to build a powerhouse motor just a good strong eng in the 350-400 horse area

**steelhorse** · 05-28-2008, 06:06 PM

Does anybody know where I might find info on this?

JAKES 68GMC · 05-30-2008, 02:36 AM

87-95 heads suck. I believe they are called whirlport heads and are only good until 4000rpm or so. They don't make good power.

BP68 · 05-30-2008, 05:26 AM

You can add Vortec heads. I am using a 89 TBI suburban shortblock with a Comp Cams camshaft, 97 model cast iron Vortec heads, and a Edlebrock intake/carb.

yad · 05-30-2008, 05:30 AM

Yeah, but can you go backwards with the heads. I have an 87-95 roller cam block, and I want to put on 70's model 350 heads. I have the older style intake manifold for the older heads. Will everything work? I know the 87-95 heads are terrible, but blocks seem ok.

**steelhorse** · 05-30-2008, 01:33 PM

Mine is the non roller block.Im thinking of going with the GM performance vortec heads and an edelbrock intake.

05-28-2008, 12:22 AM	#1
steelhorse Senior Member Join Date: Apr 2008 Location: Franklinton NC Posts: 1,309	87 chevy 350 I bought an 87 c10 for the engine and trans.It had a 350 throttle body motor and 700r4 trans.Here is my question, the 87-95 motors all seem to have different heads and intake.Are these heads any good?If not can you use the 55-86 heads and intake,or the later vortec style heads and intake.Im not looking to build a powerhouse motor just a good strong eng in the 350-400 horse area

05-28-2008, 06:06 PM	#2
steelhorse Senior Member Join Date: Apr 2008 Location: Franklinton NC Posts: 1,309	Re: 87 chevy 350 Does anybody know where I might find info on this?

05-30-2008, 02:36 AM	#3
JAKES 68GMC Aluminum slot wheels rule... Join Date: Jan 2006 Location: Maine Posts: 6,211	Re: 87 chevy 350 87-95 heads suck. I believe they are called whirlport heads and are only good until 4000rpm or so. They don't make good power. Last edited by JAKES 68GMC; 05-30-2008 at 02:36 AM.

05-30-2008, 05:26 AM	#4
BP68 Registered User Join Date: Jun 2006 Location: Olive Branch, MS Posts: 824	Re: 87 chevy 350 You can add Vortec heads. I am using a 89 TBI suburban shortblock with a Comp Cams camshaft, 97 model cast iron Vortec heads, and a Edlebrock intake/carb. __________________ 68 C10 Shortbed Fleetside 06 Chevy Ext Cab Fleetside 03 Grand Prix GTP My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=269999

05-30-2008, 05:30 AM	#5
yad Driving the Thin Blue Line Join Date: Feb 2008 Location: St. Louis MO Posts: 43	Re: 87 chevy 350 Yeah, but can you go backwards with the heads. I have an 87-95 roller cam block, and I want to put on 70's model 350 heads. I have the older style intake manifold for the older heads. Will everything work? I know the 87-95 heads are terrible, but blocks seem ok.

05-30-2008, 01:33 PM	#6
steelhorse Senior Member Join Date: Apr 2008 Location: Franklinton NC Posts: 1,309	Re: 87 chevy 350 Mine is the non roller block.Im thinking of going with the GM performance vortec heads and an edelbrock intake.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.