|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
06-21-2008, 09:30 AM
|
#1 |
|
Sierra Grande Club
Join Date: Jan 2007
Location: New Mexico USA
Posts: 2,433
|
Motor mount bolts, will these work?
I hope I'm ok here, I purchased these bolts with grade 8 washers. They are a tad long but that's the shortest they had with the flange that I wanted.
 I also got some 3/8-24 with lock washers in 3/4 length for the converter to flex plate. If something is not going to work let me know! s/t   
__________________
1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe. 
|
|
|
|
06-21-2008, 10:12 AM
|
#2 |
|
Senoir Member
Join Date: Mar 2002
Location: Rock Hill, SC USA
Posts: 1,214
|
Re: Motor mount bolts, will these work?
The bolts should be fine for the mount to frame, but probably too long for the mount to engine side.
The 3/4" long converter bolts are most likely to long and will hit the converter, I think the originals are approx 1/2" long. All can be cut off and filed of course...at the time of installation.
__________________
67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424 Last edited by gregbr; 06-21-2008 at 10:13 AM. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
