Will these wheels fit? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMC65Guy · 07-01-2008, 10:06 PM

I'm looking for some aftermarket wheels, Will these fit a 6 bolt fenderside?

Bolt Pattern Offset
15x6 6x139.7 0.00

*blackedoutharley* · 07-02-2008, 01:44 AM

That sounds like the specs for the stock, oem wheel and the only thing I can think of that would make them not fit is if the center bore hole is not large enough to clear the hubs.

Only 'disadvantage' to the 15"X6" is that it is pretty narrow and finding tires that are tall enough that are not too wide for the wheels will be tough; especially in a radial.

Are you going for the stock look?

If so I would recommend a 7.00X15 tire.
They are bias ply, just like the originals, and will work fine. You could find the original size from places like Coker Tire but the cost will much greater than the 7.00X15 which should be available at your local tire shop and is real close to the original size tire.

P.S. who makes an aftermarket wheel in 15X6 in a 6 lug pattern? And what style/construction is it?

64c20crewcab · 07-02-2008, 01:56 PM

15x6 - 6 lug steel wheels are available from WheelVintiques.com or StocktonWheel.com

*blackedoutharley* · 07-03-2008, 03:31 AM

Yeah I know about them (both are customers of mine) I just don't consider a steel wheel (stock style) as aftermarket...

GMC65Guy · 07-03-2008, 08:15 AM

These are what Im going to go with

http://www.hotrodhanks.com/products/...roductID_/4426

powdercoated red

*blackedoutharley* · 07-04-2008, 03:12 AM

Are you running the 6" wide wheel on front and rear?

GMC65Guy · 07-04-2008, 09:58 AM

Quote:

Originally Posted by blackedoutharley

Are you running the 6" wide wheel on front and rear?

Right now or when i get new wheels? Right now i have the stockers in front and some wider ones in the rear.... when i buy those I planned on getting them for all 4's

Is there something wrong with running those wheels? Don't people with "phycho billy,rocka billy" trucks use those all the time?

64c20crewcab · 07-04-2008, 10:52 AM

nuttin wrong with them at all. soem run the stock wheels. i've ran rallye wheels painted black and caps on my 91 gmc suburban on bfg's and same wheels on my last c10 with bullet caps on www's. looked just fine. bottom line is to run with what ya like. it's yer truck.

07-01-2008, 10:06 PM	#1
GMC65Guy Registered User Join Date: Jun 2008 Location: Stillwater,Oklahoma Posts: 130	Will these wheels fit? I'm looking for some aftermarket wheels, Will these fit a 6 bolt fenderside? Bolt Pattern Offset 15x6 6x139.7 0.00

07-02-2008, 01:44 AM	#2
blackedoutharley Account Suspended Join Date: Jul 2007 Location: Plumas Lake, Ca. Posts: 1,009	Re: Will these wheels fit? That sounds like the specs for the stock, oem wheel and the only thing I can think of that would make them not fit is if the center bore hole is not large enough to clear the hubs. Only 'disadvantage' to the 15"X6" is that it is pretty narrow and finding tires that are tall enough that are not too wide for the wheels will be tough; especially in a radial. Are you going for the stock look? If so I would recommend a 7.00X15 tire. They are bias ply, just like the originals, and will work fine. You could find the original size from places like Coker Tire but the cost will much greater than the 7.00X15 which should be available at your local tire shop and is real close to the original size tire. P.S. who makes an aftermarket wheel in 15X6 in a 6 lug pattern? And what style/construction is it? Last edited by blackedoutharley; 07-02-2008 at 01:46 AM.

07-02-2008, 01:56 PM	#3
64c20crewcab Registered User Join Date: Jun 2008 Location: North SD County Posts: 631	Re: Will these wheels fit? 15x6 - 6 lug steel wheels are available from WheelVintiques.com or StocktonWheel.com __________________ ..............................._________ ......___________//___[[___{\ _____ ...../__(_(O)_)___/____/____/_(O)_/ 1964 C20 Long Stepside 3 Door Crew Cab - Armbruster-Stageway Conversion Y2K INDN Chief "ONE OF A KIND, NOT ONE OF THE CROWD" Aug 2010 - Front end frame cleanup & engine swap done!!! June 2011 - Rear end bagged Sept 2011 - Rebuild motor top end Sept 2012 - Parked and slowly working on it. Aug 2013 - Front end bagged - finally! Aug 2014 - Stepside swap conversion done. Finally ready to start bodywork! Have a few KEWL ideas... Here is my build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=335427

07-03-2008, 03:31 AM	#4
blackedoutharley Account Suspended Join Date: Jul 2007 Location: Plumas Lake, Ca. Posts: 1,009	Re: Will these wheels fit? Yeah I know about them (both are customers of mine) I just don't consider a steel wheel (stock style) as aftermarket...

07-03-2008, 08:15 AM	#5
GMC65Guy Registered User Join Date: Jun 2008 Location: Stillwater,Oklahoma Posts: 130	Re: Will these wheels fit? These are what Im going to go with http://www.hotrodhanks.com/products/...roductID_/4426 powdercoated red

07-04-2008, 03:12 AM	#6
blackedoutharley Account Suspended Join Date: Jul 2007 Location: Plumas Lake, Ca. Posts: 1,009	Re: Will these wheels fit? Are you running the 6" wide wheel on front and rear?

07-04-2008, 10:52 AM	#8
64c20crewcab Registered User Join Date: Jun 2008 Location: North SD County Posts: 631	Re: Will these wheels fit? nuttin wrong with them at all. soem run the stock wheels. i've ran rallye wheels painted black and caps on my 91 gmc suburban on bfg's and same wheels on my last c10 with bullet caps on www's. looked just fine. bottom line is to run with what ya like. it's yer truck. __________________ ..............................._________ ......___________//___[[___{\ _____ ...../__(_(O)_)___/____/____/_(O)_/ 1964 C20 Long Stepside 3 Door Crew Cab - Armbruster-Stageway Conversion Y2K INDN Chief "ONE OF A KIND, NOT ONE OF THE CROWD" Aug 2010 - Front end frame cleanup & engine swap done!!! June 2011 - Rear end bagged Sept 2011 - Rebuild motor top end Sept 2012 - Parked and slowly working on it. Aug 2013 - Front end bagged - finally! Aug 2014 - Stepside swap conversion done. Finally ready to start bodywork! Have a few KEWL ideas... Here is my build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=335427

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.