|
05-08-2002, 07:58 PM | #1 |
Registered User
Join Date: Nov 2001
Location: Fairmont WV
Posts: 304
|
Signal Light Cancel
I have my Steering Wheel off to replace the top bearing. Thought I would fix my signal light. It won't cancel when used for a right turn. Both of the springs are there but the cam is cracked.
What catches the canceling springs to cause them to cancel?? Should I replace just the cam or the whole switch? If you buy a whole switch does it come with the cam? ------------------ Rod Childers '71 C10 Stepside
__________________
Rod Childers '71 C10 Stepside |
05-08-2002, 08:01 PM | #2 |
Led Sled! Discs R 4 ME!
Join Date: Jan 2001
Location: Toms River, NJ, USA (Transplanted Hoosier)
Posts: 7,327
|
Yes the switch should come with the cam and new springs as a unit. confirm with your parts supplier.
|
05-08-2002, 08:26 PM | #3 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
dealerships stil have these assemblies new, and arent expensive yet i believe, i got one from there once, came with wiring harness adaptor and all
------------------ Randy- Lincoln, IL randy@ccaonline.com 2177353230 *many GM parts bought, traded, or sold -am parting out: '81 Cutlass Supreme Brougham current fleet: -71 C-10 350/CH465/3.07- basketcase, #1 -90 Cavalier 2.2L sky blue, a driver -84 Z28 5.0L/700R4/3.73 daily driver -84 Firebird/SE 2.8L/T-5/3.73/engine bad, project #2 -82 purple Trans Am, project #3 *Paint is overrated* © RSS Enterprises 2000 |
05-08-2002, 08:35 PM | #4 |
Registered User
Join Date: Nov 2001
Location: Fairmont WV
Posts: 304
|
Thanks guys, I think I'm going to replace the whole thing, However, I still don't see what catches the canceling springs?? Is it the metal cover??
------------------ Rod Childers '71 C10 Stepside
__________________
Rod Childers '71 C10 Stepside |
05-08-2002, 09:44 PM | #5 |
Registered User
Join Date: Apr 2001
Location: Ivanhoe, MN USA
Posts: 32
|
I did this to mine last summer But I just replaced the cam and got all new springs from Chevy Duty it fairly simple just take the old cam out transfer the signal lever springs and switch contacts and pop it back in place. the springs cancel by the other plastic cam that rides inside the outer cam and has the horn contact on it
Hope this helps ------------------ 70 chevy lwb 350 3on the tree
__________________
70 chevy c/10 lwb 350 TH350/under construction 91 chevy K1500 350 700r4 |
05-08-2002, 09:52 PM | #6 |
Registered User
Join Date: Nov 2001
Location: Fairmont WV
Posts: 304
|
Yep I see it now, sorta laid that part aside while I was tryn to figure it out. Funny, the chasis manual even calls it the "canceling cam" shoulda RTFM
Thanks guys. ------------------ Rod Childers '71 C10 Stepside
__________________
Rod Childers '71 C10 Stepside |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|