trucks with impala ss wheels?

[SBTork]

I found a great deal on a set of '94-'96 Impala SS 17x8.5's. I don't think i've ever seen them on a square bodystyle truck. Does anyone have any pics?

[kevinr1970]

I am pretty sure captkaos has them on a project (or shop?) truck. Find one of his posts and there might be a link in his signature.

[gchemist]

Square body frame count?
http://www.captkaoscustoms.com/blazertank.html

http://www.captkaoscustoms.com/suicidal.html

[rod86]

hmmm i actualy like them...

[454HO]

I've got a set in the garage I am considering using on my '86. A couple things you should know if you decide to go this way.

First, there is a fairly limited range of low profile tire sizes for a 17" wheel. The stock ImpalaSS tire is 255/50 which is about 27" total diameter. You can squeeze a 285/40 on there, but the diameter will only be 26". If you don't mind a higher profile, 275/60 is a common size for SUV's and there are several high performance sport tires available. The overall diameter for this size tire is 30". If you want really fat tires, you can still get a 315/35 tire, but you will need to get the wheels widened at least 2".

Next is these wheels have a 6mm offset, which means about 5" backspace. There should not be any clearance isues, but this makes it look like the wheel is pulled into the wheelwell. If you want tucked, this is good. If you want edge of the tire even with the fender, then you will probably need some spacers.

There is a mid 80's long bed truck in my neighborhood that has ImpalaSS wheels on it. I will try and get a picture next time I see it.

Here are a couple pics I had saved on my hard drive -

[SBTork]

thanks for the good info guys. I don't think they look too bad, it'd be a cheap way to get some 17's on there.
If you see the longbox with the 17's snap a pic if you can.

[454HO]

Originally Posted by SBTork

If you see the longbox with the 17's snap a pic if you can.

Sorry it took so long, but here ya go.



Don't ask me what size tires they are, 'cause I don't know anything about this truck other than I see it in the neighborhood from time to time.

[piecesparts]

Originally Posted by 454HO

I've got a set in the garage I am considering using on my '86. A couple things you should know if you decide to go this way.

First, there is a fairly limited range of low profile tire sizes for a 17" wheel. The stock ImpalaSS tire is 255/50 which is about 27" total diameter. You can squeeze a 285/40 on there, but the diameter will only be 26". If you don't mind a higher profile, 275/60 is a common size for SUV's and there are several high performance sport tires available. The overall diameter for this size tire is 30". If you want really fat tires, you can still get a 315/35 tire, but you will need to get the wheels widened at least 2".

Next is these wheels have a 6mm offset, which means about 5" backspace. There should not be any clearance isues, but this makes it look like the wheel is pulled into the wheelwell. If you want tucked, this is good. If you want edge of the tire even with the fender, then you will probably need some spacers.

There is a mid 80's long bed truck in my neighborhood that has ImpalaSS wheels on it. I will try and get a picture next time I see it.

Here are a couple pics I had saved on my hard drive -

You could run the 255/50/17s in the front and a set of 275/50/17s in the back. I put this on my 91 Silverado and am getting a set of 17" rims with the same setup for my 84 GMC. The 275/50s are a 28" tire and work real well for daily driving. The Nitto tire line has them in the Nitto 450S series.

[Captkaos]

Here is my beater when it was running with them on it:



Here is a good view of the offset

[SBTork]

^^not bad

[Square84]

ther was a thread awhile back about can our trucks pull off the patina look and capts truck is a perfect example that they can look good.

[bad6772]

RNGs not a square body but it shows how good they can look.

[COMP]

looks good,,,i'd like to get a set of the turbine's in that one pic

[SBTork]

thanks for getting the pic 454HO, that may be a bit too much tire for me, but it looks good. Thanks for the pics guys.

[kevinr1970]

Awakened from the dead...

Is $350 a good price for these wheels with usable tires?

[454HO]

Originally Posted by kevinr1970

Awakened from the dead...

Is $350 a good price for these wheels with usable tires?

I would say so. These wheels usually sell for about $75 each in good used condition with the center caps from what I have seen. They used to be available from the dealer new for about $630 a set of 4, but I think they have been discontinued now.

[gchemist]

Wow, I thought that was my truck! Nice!! Welcome to the site.

[N2TRUX]

Welcome to the site primrrd. Truck looks good. The front plate was playing mind games till I zoomed in on it.

[gchemist]

The upside down plate is to trick toll road cameras!!

[N2TRUX]

Originally Posted by gchemist

The upside down plate is to trick toll road cameras!!

Hows that work? They shoot the pics from the rear too.

[primrrd]

thanks... yes they are 5X5
In Texas you have to display a front plate.
I got a ticket in the 80's for a no license on my sweet lowered and monochrome 79 el camino... so the upside down plate is my statement against "the man" ...
only once has a cop made any comment. I got pulled for minor speeding.
the cop had a bunch of questions about lowering and how i shaved my door handles... he asked about the plate and I blamed my 12 yo son...(:
**
as for wheels, i have an eye on some 5 spoke summit racing wheels right now. anybody running those?

[Copytech]

Originally Posted by gchemist

The upside down plate is to trick toll road cameras!!

In Ohio that is a $120 improper display ticket.

[Pop's C-10]

.they look good

[SiCk_DiAbLo]

They 5 x 5 lug pattern, or did ya modify them??

[Gemp]

Originally Posted by SiCk_DiAbLo

They 5 x 5 lug pattern, or did ya modify them??

Their 5x5.......