Anyone interested in OE style 2.5" ram horn flanges? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jeffspower · 07-25-2008, 10:39 PM

I put a pair of 2.5" outlet Vette ram horns on the '68. I'm wanting the OE style formed flanges that attach the pipe to the manifold. All I can find readily available is the 3/8" flat mild steel that are prone to warp bad. I did find one place that found a box of 5 sets in a warehouse, but they will only sell the whole box to get rid of them. I haven't been quoted a price yet- should know Monday.

Assuming the price will be fair, anyone interested in the other 4 sets?

**jerry moss** · 07-25-2008, 11:09 PM

i'll try and remember to check on monday when i go back to work and see if we still have any hanging on the wall. as far as i know, they are still available through our muffler suppliers. in case i lose track of this post, p.m. if i don't to contact you by monday evening.

jeffspower · 07-25-2008, 11:13 PM

Thanks- that would be great!

All the parts store/ Walker/ ETC I've found are the flat style.

**PICKMUP** · 07-26-2008, 12:01 AM

I might be interested...pending pics/measurements & prices. Some of those fit OK & some don't.

jeffspower · 07-26-2008, 10:20 PM

Quote:

Originally Posted by PICKMUP

Some of those fit OK & some don't.

Exactly. I don't want any cheap flimsy junk either. I'd like to get this exhaust done soon- pulling it in & out of the garage with open manifolds isn't really as fun as actually driving the darn thing. It has been held up too long searching for some stupid flanges

**uncle** · 07-26-2008, 10:48 PM

Shouldn't a big block be the same or are you talking about the manifold pipe?

jeffspower · 07-26-2008, 11:05 PM

I think the stud- to- stud spacing is bigger on a BB. I need 3" stud/ stud. My '88 454 has '96 manifolds on it- I'll check it tomorrow- I think the studs are further apart than the old BB stuff. Anyone got an old 454 manfold to check?

**jaros44sr** · 07-27-2008, 07:18 AM

I'm interested if the price, and quality is right

**jerry moss** · 07-28-2008, 10:42 PM

i checked today at work and we are out of the stamped flanges so i called our largest suppliers and they don't stock them anymore either. all they have are the flat style, but, they do make the flat version in 3/8" thick.

jeffspower · 07-29-2008, 07:14 PM

Jerry, thanks for checking. The guy told me today that "the warehouse showed them in inventory, but when they went to the shelf to get them, they were not there". So I may have no choice other than the flat style.

I sure would like to know how guys pull of perfect & correct restorations. These flanges would be OE on a Vette, so I find it hard to believe somebody isn't making them. Seems like I run into impossibilities on the simplest things

07-25-2008, 10:39 PM	#1
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Anyone interested in OE style 2.5" ram horn flanges? I put a pair of 2.5" outlet Vette ram horns on the '68. I'm wanting the OE style formed flanges that attach the pipe to the manifold. All I can find readily available is the 3/8" flat mild steel that are prone to warp bad. I did find one place that found a box of 5 sets in a warehouse, but they will only sell the whole box to get rid of them. I haven't been quoted a price yet- should know Monday. Assuming the price will be fair, anyone interested in the other 4 sets? __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

07-25-2008, 11:09 PM	#2
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	Re: Anyone interested in OE style 2.5" ram horn flanges? i'll try and remember to check on monday when i go back to work and see if we still have any hanging on the wall. as far as i know, they are still available through our muffler suppliers. in case i lose track of this post, p.m. if i don't to contact you by monday evening. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

07-25-2008, 11:13 PM	#3
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: Anyone interested in OE style 2.5" ram horn flanges? Thanks- that would be great! All the parts store/ Walker/ ETC I've found are the flat style. __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

07-26-2008, 12:01 AM	#4
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,158	Re: Anyone interested in OE style 2.5" ram horn flanges? I might be interested...pending pics/measurements & prices. Some of those fit OK & some don't.

07-26-2008, 10:48 PM	#6
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: Anyone interested in OE style 2.5" ram horn flanges? Shouldn't a big block be the same or are you talking about the manifold pipe? Last edited by uncle; 07-26-2008 at 10:50 PM.

07-26-2008, 11:05 PM	#7
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: Anyone interested in OE style 2.5" ram horn flanges? I think the stud- to- stud spacing is bigger on a BB. I need 3" stud/ stud. My '88 454 has '96 manifolds on it- I'll check it tomorrow- I think the studs are further apart than the old BB stuff. Anyone got an old 454 manfold to check? __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

07-27-2008, 07:18 AM	#8
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,761	Re: Anyone interested in OE style 2.5" ram horn flanges? I'm interested if the price, and quality is right __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

07-28-2008, 10:42 PM	#9
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	Re: Anyone interested in OE style 2.5" ram horn flanges? i checked today at work and we are out of the stamped flanges so i called our largest suppliers and they don't stock them anymore either. all they have are the flat style, but, they do make the flat version in 3/8" thick. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

07-29-2008, 07:14 PM	#10
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: Anyone interested in OE style 2.5" ram horn flanges? Jerry, thanks for checking. The guy told me today that "the warehouse showed them in inventory, but when they went to the shelf to get them, they were not there". So I may have no choice other than the flat style. I sure would like to know how guys pull of perfect & correct restorations. These flanges would be OE on a Vette, so I find it hard to believe somebody isn't making them. Seems like I run into impossibilities on the simplest things __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.