![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Post Whore
![]() Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,684
|
![]()
Inland Truck Parts, 316-945-0255 in Wichita, Kansas can still get some parts for the Rockwell T221 transfer case that was used into 1969.
I spoke with Gil and he said he found a complete rebuild kit but it was high dollar - included bearings, gaskets and seals. He also can get just the seals but he was not able to locate just a gasket kit. There are three large yoke seals that he can get at $16.81 a piece, Federal-Mogul part number 482164N and two shifter seals at $4.20 each, Federal-Mogul part number 470954 and also states 0.750 x 1.250 x 0.250 on the box below the part number. He said he could get some different yoke seals that were just $2.00 each but he said they looked like a $2 part. If schedules work out a friend and I might do my transmission swap in two weeks! Can't wait to get that three speed out. ------------------ 1969 C20 4x4 with roughly 6" lift and 35's residing near Rose Hill, Kansas Yukon Jack's Web Pages
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Oct 2000
Location: St. Johns, Arizona
Posts: 2,660
|
![]()
Is this expensive? I didn't think that it was that much...
How much was the kit you were looking at? http://www.drivetrain.com/transferca...OCKWELL%20T221 ------------------ Bowen '68 K20 fleet '69 K10 swb fleet '72 C10 lwb step
__________________
my 2¢ - t.i.o.l.i. Bowen 1968 K20 fleet 1969 K10 swb fleet 1972 K10 Suburban 1972 C10 lwb step 1992 K1500 'burb 1995 K2500 'burb 1997 C1500 'burb 1999 K1500 2000 K1500 'burb Why do I own so many Suburbans? |
![]() |
![]() |
![]() |
#3 |
Post Whore
![]() Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,684
|
![]()
The three seals at $16 each is a bit expensive. The seals for the SM465 were in the neighbor hood of $6-8 each. The kit was above $90. I don't think I need bearings and I can make my own gaskets. Way I look at it, now's a great time to cut down on some leaks and it is a bit leaky.
------------------ 1969 C20 4x4 with roughly 6" lift and 35's residing near Rose Hill, Kansas Yukon Jack's Web Pages
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|