WTB in NC: 70 rad support and inner fenders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oteixeira · 08-13-2008, 10:41 AM

Hi all,

I am putting the nose back together soon on my truck and realize that the rad support that drops a ton of rust every time I move it and the inner fenders with no front mounting areas are probably not going to cut it. I just need good driver quality stuff, no need to pull out the show stock for me. I need the rad support (I think it is specific to 69-72 chevy) and the inner fenders. They don't have to be pretty, just nice and solid. Shoot me a PM. Also, I am hoping they are local, cause it could be a bear to ship these items.

Thanks in advance,

Orlando

gcburdic · 08-13-2008, 11:12 AM

PM sent RE: inner fenders....

gcburdic · 08-13-2008, 03:36 PM

ttt for ya.....sorry I couldn't help!

1972CST · 08-13-2008, 08:53 PM

I might have what you need if you dont mind patching a few small places. Located near Concord.

oteixeira · 08-13-2008, 10:16 PM

Where are the patches needed? If they are around the mounting areas then they are the same as what I have. Do you have pictures?

Orlando

billsbowtie · 08-13-2008, 11:03 PM

i have a good rad. suport and a good drivers side inner fender for $150.00 . i am about 2 1/2 hours north of asheville but i may be able to get it to n.c. how far are you from asheville?

StormRider · 08-14-2008, 12:11 AM

If you can't find any and decide to go with new ones, I have a left and right inner fender that I was going to put up for sale soon. $160 for both. Louie.

billsbowtie · 08-14-2008, 12:14 AM

heres the rad. suports you pick witch one you want . they are both about the same shape.

billsbowtie · 08-14-2008, 12:20 AM

here is the drivers side inner fender. po cut out a spot for exhaust instead of bending the pipe that piece should be good on your old fender to patch it with.

oteixeira · 08-14-2008, 07:45 AM

Bill,

Now I feel silly, I just PM'd you and told you were to send the pictures. The parts look promising, I was wondering if I could get a picture of the inside bottom rail of the rad supports. Basically, I would like the one that is in better shape on that rail, mine is rusted away under what was the battery tray.

Orlando

PS: Stormrider, I may take you up on that but just to let you know Bill looks to have most of what I need here in the pics. Thanks.

billsbowtie · 08-14-2008, 12:15 PM

here is a couple of pic.s under battery.

billsbowtie · 08-14-2008, 12:15 PM

oteixeira · 08-14-2008, 01:16 PM

OK,

I want the redish tinted one as well as the fender. PM me so we can start talking about how to get them from there to here and also deal with monetary transactions.

PS: I still need a passengers side inner folks, if you have a good one, hit me up.

Orlando

08-13-2008, 10:41 AM	#1
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	WTB in NC: 70 rad support and inner fenders Hi all, I am putting the nose back together soon on my truck and realize that the rad support that drops a ton of rust every time I move it and the inner fenders with no front mounting areas are probably not going to cut it. I just need good driver quality stuff, no need to pull out the show stock for me. I need the rad support (I think it is specific to 69-72 chevy) and the inner fenders. They don't have to be pretty, just nice and solid. Shoot me a PM. Also, I am hoping they are local, cause it could be a bear to ship these items. Thanks in advance, Orlando __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251

08-13-2008, 11:12 AM	#2
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: WTB in NC: 70 rad support and inner fenders PM sent RE: inner fenders.... __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

08-13-2008, 03:36 PM	#3
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: WTB in NC: 70 rad support and inner fenders ttt for ya.....sorry I couldn't help! __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

08-13-2008, 08:53 PM	#4
1972CST Registered User Join Date: Mar 2008 Location: Concord NC Posts: 511	Re: WTB in NC: 70 rad support and inner fenders I might have what you need if you dont mind patching a few small places. Located near Concord. Last edited by 1972CST; 08-13-2008 at 08:54 PM.

08-13-2008, 10:16 PM	#5
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	Re: WTB in NC: 70 rad support and inner fenders Where are the patches needed? If they are around the mounting areas then they are the same as what I have. Do you have pictures? Orlando __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251

08-13-2008, 11:03 PM	#6
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB in NC: 70 rad support and inner fenders i have a good rad. suport and a good drivers side inner fender for $150.00 . i am about 2 1/2 hours north of asheville but i may be able to get it to n.c. how far are you from asheville? __________________ i have 67/72 chevy truck parts f/s.

08-14-2008, 12:11 AM	#7
StormRider Junior Member Join Date: Jan 2007 Location: Charlotte, NC Posts: 243	Re: WTB in NC: 70 rad support and inner fenders If you can't find any and decide to go with new ones, I have a left and right inner fender that I was going to put up for sale soon. $160 for both. Louie. __________________ 68 LongStep 350/ 3 Spd (ongoing project) 04 Suburban Z71 (daily driver) 97 C5 Corvette ( sold when 2nd baby came) 90 454SS pick up (sold) 1970 Chevelle Malibu 454 For Sale $8,000. my art website http://www.louietrangallery.com/ my 68 Longstep...No Shortstep Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=296736

08-14-2008, 12:14 AM	#8
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB in NC: 70 rad support and inner fenders heres the rad. suports you pick witch one you want . they are both about the same shape. __________________ i have 67/72 chevy truck parts f/s.

08-14-2008, 12:20 AM	#9
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB in NC: 70 rad support and inner fenders here is the drivers side inner fender. po cut out a spot for exhaust instead of bending the pipe that piece should be good on your old fender to patch it with. __________________ i have 67/72 chevy truck parts f/s.

08-14-2008, 07:45 AM	#10
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	Re: WTB in NC: 70 rad support and inner fenders Bill, Now I feel silly, I just PM'd you and told you were to send the pictures. The parts look promising, I was wondering if I could get a picture of the inside bottom rail of the rad supports. Basically, I would like the one that is in better shape on that rail, mine is rusted away under what was the battery tray. Orlando PS: Stormrider, I may take you up on that but just to let you know Bill looks to have most of what I need here in the pics. Thanks. __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251

08-14-2008, 12:15 PM	#11
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB in NC: 70 rad support and inner fenders here is a couple of pic.s under battery. __________________ i have 67/72 chevy truck parts f/s.

08-14-2008, 01:16 PM	#13
oteixeira Registered User Join Date: Jan 2001 Location: Middlesex, NC Posts: 231	Re: WTB in NC: 70 rad support and inner fenders OK, I want the redish tinted one as well as the fender. PM me so we can start talking about how to get them from there to here and also deal with monetary transactions. PS: I still need a passengers side inner folks, if you have a good one, hit me up. Orlando __________________ 70 C-20 Custom Camper Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=300251

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.