![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 | |
Bloo
Join Date: Feb 2001
Location: Barren County Kentucky
Posts: 6,285
|
which would you rather have?
i can either add a summit 1100 cam to my motor as is, and go from 374 max torque@2000RPM/280 max HP@4500 to 406T@2000 and 287HP@4500, or i can go a step farther and add Dart Iron Eagle heads and get 420T@2000/300HP@4500
so choices are: as is-- 374T@2000/280HP@4500 w/cam-- 406T@2000/287HP@4500 cam+heads--420T@2000/300HP@4500 the tranny is an SM465, gears are 4:10s. i have to be able to pull 27500lbs
__________________
ASE Master Certified-GM Trained-Mechanic 1968 Chevy C30 157" WB Wrecker 1969 Chevy CST/10 SWB 1971 Chevy Custom/10 (first truck) 350, NV3500 5 speed 1971 Chevy K20 Custom Camper 4x4 350 TBI, SM465/NP205 1974 Chevy Custom Deluxe/10 1979 Chevy Custom Deluxe K10 farm truck beater 1989 Chevy K2500 Quote:
![]() |
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Aug 2001
Location: escondido, ca 92026
Posts: 1,222
|
cam and heads, go for it....
__________________
'72 short step, 350, 700R4, tilt, ps, pdb, a/c, lowered coils, etc., other work in progress... San Diego, CA 72 Stepside Project |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Nov 2002
Location: Spokane WA
Posts: 66
|
I agree cam and heads you can't have enough HP and torque
![]() ![]() something I don't have at the moment but the parts are on order ![]()
__________________
67 C/20 camper special 350 Last edited by melloyello; 11-14-2002 at 10:27 PM. |
![]() |
![]() |
![]() |
#4 |
Used to have a truck
Join Date: May 2002
Location: port orchard WA
Posts: 1,552
|
I use and highly recommend world product SR torquers . The ports on the intake side come in at 170 cc and they flow better than any small block head chevy ever put in a car but without having the ports too large which will kill performance as fast as anything. They flow even a bit better than the newest iron vortec chevrolet heads on the exhaust side and within 5% on the intake. Theyre priced comparable with the vortecs and do not require a different manifold , rockers or valve covers. With an 1102 summit cam you'd be looking at around 340 hp at 5000 rpm and a near straight line torque curve of around 383-400 ft lbs from 2000 to 4500 rpm.
__________________
No truck :-( |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|