The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1967-1972 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-22-2008, 11:43 PM   #1
FormerMember
Account Suspended
 
Join Date: Feb 2004
Posts: 3,051
When is it too much

So, I looked at the cab on my Dad's 70 GMC (I own it now, he passed on in 97, but it's still his).

It needs floor supports, cab corners, inner and outer rockers, probably floor repair and firewall repair.

Should I swap a cab that needs less work?
FormerMember is offline   Reply With Quote
Old 08-22-2008, 11:45 PM   #2
dan42
Registered User
 
dan42's Avatar
 
Join Date: Feb 2007
Location: Cali Central Coast
Posts: 5,191
Re: When is it too much

yeah, I would, unless there is real sentimental value. It also depends on how much time and effort you have to do it.
__________________
'67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD
Click here to support the board
Philippians 4: 6-7
dan42 is offline   Reply With Quote
Old 08-22-2008, 11:55 PM   #3
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
Re: When is it too much

Agree. Let me know if you need one. I've got a couple of pretty decent ones out here that need minimal work.

R/
Hart_Rod is offline   Reply With Quote
Old 08-22-2008, 11:58 PM   #4
FormerMember
Account Suspended
 
Join Date: Feb 2004
Posts: 3,051
Re: When is it too much

Quote:
Originally Posted by Hart_Rod View Post
Agree. Let me know if you need one. I've got a couple of pretty decent ones out here that need minimal work.

R/
Pics please.
FormerMember is offline   Reply With Quote
Old 08-23-2008, 12:05 AM   #5
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
Re: When is it too much

Quote:
Originally Posted by grendel View Post
Pics please.
It will probably be next week before I can get some. AC or non-AC? What other stuff do you need?
Hart_Rod is offline   Reply With Quote
Old 08-23-2008, 12:13 AM   #6
FormerMember
Account Suspended
 
Join Date: Feb 2004
Posts: 3,051
Re: When is it too much

Quote:
Originally Posted by Hart_Rod View Post
It will probably be next week before I can get some. AC or non-AC? What other stuff do you need?
AC, although I can install a different dash.

inner fenders
GMC core support
doors


sadly, I have a complete truck sitting in CO that would be a great donor, but having problems getting it shipped.

May actually be easier from AZ, as I have friends that drive through there frequently.
FormerMember is offline   Reply With Quote
Old 08-23-2008, 12:26 AM   #7
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
Re: When is it too much

Quote:
Originally Posted by grendel View Post
AC, although I can install a different dash.

inner fenders
GMC core support
doors


sadly, I have a complete truck sitting in CO that would be a great donor, but having problems getting it shipped.

May actually be easier from AZ, as I have friends that drive through there frequently.
I think I have most of that, except maybe the core support. I have a set of buddy buckets in phoenix that need to come to Albuquerque if you know anyone coming this way.

R/
Hart_Rod is offline   Reply With Quote
Old 08-23-2008, 10:55 AM   #8
MrBeast
high-Tech Red Neck
 
MrBeast's Avatar
 
Join Date: Feb 2008
Location: Livingston, MT/On my boat WA/BC/AK
Posts: 2,294
Re: When is it too much

Quote:
Originally Posted by grendel View Post
AC, although I can install a different dash.

inner fenders
GMC core support
doors


sadly, I have a complete truck sitting in CO that would be a great donor, but having problems getting it shipped.

May actually be easier from AZ, as I have friends that drive through there frequently.
What part of colorado? I am heading out to California in May, I will have an empty trailer, if you want to cover the cost of the gas I could swing a day out of my way possibly and drag it far enough south into Arizona for your friend to grab, or possibly drag it all the way to cali if you needed to meet up with some one there.
__________________
"He used to be a pretty nice feller, now he's a welder!"
MrBeast is offline   Reply With Quote
Old 08-23-2008, 12:27 AM   #9
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
Re: When is it too much

Do you need a Big Block 402?
Hart_Rod is offline   Reply With Quote
Old 08-23-2008, 12:56 AM   #10
FormerMember
Account Suspended
 
Join Date: Feb 2004
Posts: 3,051
Re: When is it too much

Quote:
Originally Posted by Hart_Rod View Post
Do you need a Big Block 402?
No thanks, I have plenty of engines.

This is staying SBC. I have a 500hp 383 being built for it.
FormerMember is offline   Reply With Quote
Old 08-23-2008, 07:53 AM   #11
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
Re: When is it too much

It would take a real gone cab for me to scrap these days.Most of what goes wrong in the bottom is made these days.With complete floors and full-length floor extentions it`s tough not to repair them.With rust showing in most places,now,on western cabs I think it`s rare to outweigh the cost of purchase and transport against a repaired eastern cab.Figure that light rust on the floor or pitted/tiny holes metal from out west has got to have the same panels replaced.If a California rocker or cab corner isn`t bubbled yet,it will be once you bring it back here.Might as well replace before you paint.It`ll be a nicely painted truck with bubbles before too long.Well,unless you never hit rain and keep it in a heated garage to keep the humidity down.
A cab or other major component has to be real crusty for me to scrap.Like nothing good to weld to that`s just going to keep rusting.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 08-23-2008, 09:03 AM   #12
FormerMember
Account Suspended
 
Join Date: Feb 2004
Posts: 3,051
Re: When is it too much

Quote:
Originally Posted by special-K View Post
It would take a real gone cab for me to scrap these days.Most of what goes wrong in the bottom is made these days.With complete floors and full-length floor extentions it`s tough not to repair them.With rust showing in most places,now,on western cabs I think it`s rare to outweigh the cost of purchase and transport against a repaired eastern cab.Figure that light rust on the floor or pitted/tiny holes metal from out west has got to have the same panels replaced.If a California rocker or cab corner isn`t bubbled yet,it will be once you bring it back here.Might as well replace before you paint.It`ll be a nicely painted truck with bubbles before too long.Well,unless you never hit rain and keep it in a heated garage to keep the humidity down.
A cab or other major component has to be real crusty for me to scrap.Like nothing good to weld to that`s just going to keep rusting.

That's kind of what kept me up last night.
It's also a matter of effort... I know either will require repair. It's the extent of the repairs that's boggling me... heh, 3 frames offs in progress now.
FormerMember is offline   Reply With Quote
Old 08-23-2008, 10:49 AM   #13
ChevLoRay
Old Skool Club
 
ChevLoRay's Avatar
 
Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
Re: When is it too much

The connection that you and the truck have with your late father is not something that another truck can replace. This makes your decision difficult and emotional, like it or not.

My truck (picture follows) needed floor pans, rockers and kick panels and supports, too. After having that done, a later event ensued and due to some poor planning and someones' health issues, more rust damage has emerged. The sad fact is that I knew "some" of it was in existance, but not to the extent. Everything else on the body (fenders/hood/bed, etc.) is rust-free and has never been hit, i.e., no bondo anywhere. The financial logistics are a conumdrum. I don't want to throw good money after bad, nor do I want to take on a project like swapping cabs if this one can be repaired. The doors still line up, although the driver's door needs new bushings/pins. The passenger door is fine.

For me, there is no fatherly tie-in, unless you talk to my kids/grandkids. They want me to finish it. It ain't their money, though. I want it done, too. I love driving it, and can't wait until it is done....but I will have to.

Here's a picture of the firewall. The damage around the heater/ac area is evident. What you can't see are the perforations of the metal where the pinch weld attaches the toeboard to the upper cowl. It sucks.
Attached Images
 
__________________
Member Nr. 2770

'96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed.

'69 C-10 SWB; 350/TH400 - in limbo

The older I get, the better I was.
ChevLoRay is offline   Reply With Quote
Old 08-23-2008, 10:59 AM   #14
MrBeast
high-Tech Red Neck
 
MrBeast's Avatar
 
Join Date: Feb 2008
Location: Livingston, MT/On my boat WA/BC/AK
Posts: 2,294
Re: When is it too much

I know for myself, if I had my fathers or grandfathers cool ole gmc, there isnt much I wouldnt do to repair it.

You can buy a complete cab floor, and you can get a complete firewall, I think it is well worth the while, if you look at the TRI-po thread they show taking a cab, cutting the floor out and replacing everything.

The thing to keep in mind, that will be stuck in the back of your head, is always and forever you will know that the cab you are riding in is not dads if you swap it out.

I dont know about you but that would bother me always and forever.
__________________
"He used to be a pretty nice feller, now he's a welder!"
MrBeast is offline   Reply With Quote
Old 08-23-2008, 11:23 AM   #15
72BlckButy
Tot Roddin'
 
72BlckButy's Avatar
 
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
Re: When is it too much

I have to agree with MrBeast... not to add more weight to your mind, but it had family value I would repair it no matter what. Good luck with the decision, but it ultimately comes down to how much it will cost to repair and how much you have set aside for the repair.
__________________
-Nate

1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6)
1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior)
2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)
72BlckButy is offline   Reply With Quote
Old 08-25-2008, 09:44 AM   #16
FormerMember
Account Suspended
 
Join Date: Feb 2004
Posts: 3,051
Re: When is it too much

Well, I need to add above the doors and rear window to the mix. It's not simply a cut the floor off and replace with one of Jon's. I now have to do the firewall on both sides, above the rear window and above the passenger's side door.


This cab was never aired out in ten years, with a ton of moisture trapped inside. I really, really want to kill my half brother.

I am leaning towards a cab replacement, and keep this one to repair it. Quite frankly, it's what my father would do. He also said work "Smart AND Hard but if you can only do one, make it Smart".

He also used to say "Poop in one hand and wish in the other... see which fills faster".

Last edited by FormerMember; 08-25-2008 at 09:44 AM.
FormerMember is offline   Reply With Quote
Old 08-25-2008, 12:26 PM   #17
67mater
Registered User
 
67mater's Avatar
 
Join Date: Sep 2007
Location: Mundelein, IL
Posts: 862
Re: When is it too much

First off, Special-K is dead on; a little rot is teh same as a lot in those outer panels. The other thing I'm beginning to find as I dig in is that rockers are one thing, but if the supports need replacing, you necessarily have to get into the cab mount areas, and it's a big project. my $.02
__________________
time is inversely proportional to money; that's why it takes me so long

1967 K10
1967 Camaro
67mater is offline   Reply With Quote
Old 08-25-2008, 01:04 PM   #18
FormerMember
Account Suspended
 
Join Date: Feb 2004
Posts: 3,051
Re: When is it too much

Quote:
Originally Posted by 67mater View Post
First off, Special-K is dead on; a little rot is teh same as a lot in those outer panels. The other thing I'm beginning to find as I dig in is that rockers are one thing, but if the supports need replacing, you necessarily have to get into the cab mount areas, and it's a big project. my $.02
Yep... two of my frame off's used sheet metal from out west.

The cab required outer rockers, two dog legs, a kick panel and some creative welding on the bed floor.

The K5 was outer rockers, floor pans, kick panels and dog legs.

These were both "rust free" California sheet metal...
FormerMember is offline   Reply With Quote
Old 08-25-2008, 01:12 PM   #19
mahanian
C10 addict
 
mahanian's Avatar
 
Join Date: Apr 2006
Location: Arizona
Posts: 2,432
Re: When is it too much

If you're interested, I have an Arizona cab from a 67 with a big window that only has one spot of rust on the passenger kick panel. The rockers and cab corners are rust free. I bought it for my 67 but the city is giving me a lot of grief about my truck parts. The cab has a small dent in the back that can be easily massaged out. It also has snaps on the inside rear window for a camper boot. I figured it's easier to weld up a couple holes and not have to worry about rocker panels. I'm looking to get $500 for it.
__________________
Jared

67 C10 CST Short Fleet Big Window
65 C10 Custom Short Fleet Big Window
67 Camaro RS
mahanian is offline   Reply With Quote
Old 08-25-2008, 01:19 PM   #20
FormerMember
Account Suspended
 
Join Date: Feb 2004
Posts: 3,051
Re: When is it too much

Quote:
Originally Posted by mahanian View Post
If you're interested, I have an Arizona cab from a 67 with a big window that only has one spot of rust on the passenger kick panel. The rockers and cab corners are rust free. I bought it for my 67 but the city is giving me a lot of grief about my truck parts. The cab has a small dent in the back that can be easily massaged out. It also has snaps on the inside rear window for a camper boot. I figured it's easier to weld up a couple holes and not have to worry about rocker panels. I'm looking to get $500 for it.
Not sure I can get it out of there in a timely fashion for you.

Pics would also be helpful, but this is not a WTB thread.
FormerMember is offline   Reply With Quote
Old 08-25-2008, 01:29 PM   #21
mahanian
C10 addict
 
mahanian's Avatar
 
Join Date: Apr 2006
Location: Arizona
Posts: 2,432
Re: When is it too much

I will get you some pics....

Sorry, I assumed it was a WTB thread since it's posted in the classifieds

Last edited by mahanian; 08-25-2008 at 01:30 PM.
mahanian is offline   Reply With Quote
Old 08-25-2008, 01:32 PM   #22
FormerMember
Account Suspended
 
Join Date: Feb 2004
Posts: 3,051
Re: When is it too much

Quote:
Originally Posted by mahanian View Post
I will get you some pics....

Sorry, I assumed it was a WTB thread since it's posted in the classifieds
Interesting... I didn't post it here. Ok, that works then.
FormerMember is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:30 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com