Any GM parts guys - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ddsmith · 05-10-2002, 12:02 AM

Have a lead on a set of dually rims from a 2000 8 lug 1 Ton Dually. My question is did anything change on the rims from earlier year. Mid 80's through the 90's. Cosmetically it is not important only the offset, hub hole diameter and bolt center. Any help you can provide would be appreciated.

------------------
66 Chevy C30 Stakebody Dump, PS,PB, 327cu in
71 Corvette Coupe 454 4 speed
79 Chevy 4X4 (Tom's old truck)

*Fast68Chevy* · 05-10-2002, 02:48 PM

tape measure time... actually one of those 32nds and 64ths stainless steel 6" long measuring rules with the slider thing that you get from hardware stores, those little things are inexpensive and damn nice to have, manufacturing plants like the one im laid off from use them for production use, they are great to have around, i use mine alot! use it to measure valve facea and exhaust diameters and all kinds

[This message has been edited by Fast68Chevy (edited May 10, 2002).]

05-10-2002, 12:02 AM	#1
ddsmith Glowing since 1978 Join Date: Mar 2001 Location: Lusby,MD,USA Posts: 532	Any GM parts guys Have a lead on a set of dually rims from a 2000 8 lug 1 Ton Dually. My question is did anything change on the rims from earlier year. Mid 80's through the 90's. Cosmetically it is not important only the offset, hub hole diameter and bolt center. Any help you can provide would be appreciated. ------------------ 66 Chevy C30 Stakebody Dump, PS,PB, 327cu in 71 Corvette Coupe 454 4 speed 79 Chevy 4X4 (Tom's old truck) __________________ 66 Chevy C30 Stakebody Dump, PS,PB, 327cu in 71 Corvette Coupe 454 4 speed 69 Chevy C20 Custom Camper

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

05-10-2002, 02:48 PM	#2
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	tape measure time... actually one of those 32nds and 64ths stainless steel 6" long measuring rules with the slider thing that you get from hardware stores, those little things are inexpensive and damn nice to have, manufacturing plants like the one im laid off from use them for production use, they are great to have around, i use mine alot! use it to measure valve facea and exhaust diameters and all kinds [This message has been edited by Fast68Chevy (edited May 10, 2002).]



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.