|
|
|
09-25-2008, 10:28 PM
|
#1 |
|
Registered User
 Join Date: Jan 2007
Location: Poplar Bluff, MO
Posts: 1,502
|
Mirror help
Has anyone replaced the mirror in the old original mirror Guidex frame? I would like to keep my original one but the mirror glass is deteriorating, the rest of the setup is good. Anybody?
|
|
|
|
09-26-2008, 09:16 AM
|
#2 |
|
Post Whore
Join Date: Feb 2000
Location: Rose Hill, KS, USA
Posts: 12,684
|
Re: Mirror help
Interested in this also as mine is pretty bad too.
__________________
1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 |
|
|
|
|
09-26-2008, 10:50 PM
|
#3 |
|
Registered User
Join Date: Jan 2007
Location: Poplar Bluff, MO
Posts: 1,502
|
Re: Mirror help
Has anybody ever done this?
|
|
|
|
|
09-26-2008, 11:32 PM
|
#4 |
|
Registered User
Join Date: Jul 2001
Location: North Louisiana
Posts: 4,501
|
Re: Mirror help
Are you referring to the rear view mirror?
__________________
Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com |
|
|
|
|
09-27-2008, 07:13 AM
|
#5 |
|
Registered User
Join Date: Jan 2007
Location: Poplar Bluff, MO
Posts: 1,502
|
Re: Mirror help
Yes....
|
|
|
|
|
09-27-2008, 09:26 AM
|
#6 |
|
Registered User
Join Date: May 2000
Location: Petrolia,Ontario,Canada but working in Port Huron,Mi.
Posts: 1,771
|
Re: Mirror help
I carefully pried the chrome lip up and removed the old mirror.
Bought a cheap replacement mirror at the parts store and ripped the mirror out of the one. I outlined the old mirrors profile on the new mirror and a used diamond bit in my Dremel tool to shape it. It worked out well.I did slip with the Dremel a couple times and have a couple scratches on one of the corners but it's out of my line-of-site and doesn't interfere with the dimming function. Just take your time when prying up the lip. A plastic prying tool would prob be the more appropriate tool for this job.(I used a small screwdriver) I'll get pic's.
__________________
71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE Last edited by BobbyK; 09-27-2008 at 09:28 AM. |
|
|
|
|
09-27-2008, 04:59 PM
|
#7 |
|
Senior Member
Join Date: Apr 2000
Location: madison indiana
Posts: 3,839
|
Re: Mirror help
i`m going to install a newer mirror out of an impala there the one with the 2 reading lights mounted underneith.
__________________
jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com |
|
|
|
|
09-28-2008, 08:21 AM
|
#8 |
|
Registered User
Join Date: Jan 2007
Location: Poplar Bluff, MO
Posts: 1,502
|
Re: Mirror help
BobbK, it helped a lot. When you peeled back the tan rubber piece enough to get to the edge of the mirror, was the mirror glued on?
|
|
|
|
|
09-28-2008, 12:08 PM
|
#9 |
|
Registered User
Join Date: May 2000
Location: Petrolia,Ontario,Canada but working in Port Huron,Mi.
Posts: 1,771
|
Re: Mirror help
I believe it's only crimped in there.I don't remember any type of sealant or glue.
I did this when I 1st got the Blazer,8yrs ago now,so I'm a little foggy on the details.
__________________
71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
