292 PS gear, AC controls, Interior stuff - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70inline6 · 09-29-2008, 05:28 PM

Price is Shipped for all items - Make offer...

292 PS bracket, pump, wp pulley - $130 (Sold)
Gauge bazel panel (new) - $35 (Sold)
6 cyl HEI, cap, coil (used) - $50 (Sold)

70inline6 · 09-29-2008, 05:29 PM

More -

HVAC control with free moving cables, nice lens, side outlets, center outlet and duct. (SOLD!)

jeremy zander · 09-29-2008, 07:06 PM

I will take gauge panel,cap,coil seatbelts,visors,armrests....PM me info..!!!..for some reason i cannot resubscribe to my subscriction,. so bare with me till i figure it out,,,,i hate being a pinky!!!!!

70inline6 · 09-29-2008, 07:28 PM

Quote:

Originally Posted by jeremy zander

I will take gauge panel,cap,coil seatbelts,visors,armrests....PM me info..!!!..for some reason i cannot resubscribe to my subscriction,. so bare with me till i figure it out,,,,i hate being a pinky!!!!!

Thanks Jeremy - I tried to PM you and it said your mail box is full. It said you needed to delete some PM's before you could get any.

You can Paypal me for the parts you want at ec 928 nc at hot mail dot com. In the Paypal remarks just reply with your address. When the funds post, parts will be sent. Thank you.

jeremy zander · 09-29-2008, 08:33 PM

payment sent via paypal thank you!!!!!!!

70inline6 · 09-29-2008, 08:56 PM

Payment received. Parts will go out tomorrow. Thanks Jeremy!

**PICKMUP** · 09-29-2008, 10:54 PM

I would offer $100 for the PS...

newbraunie · 09-29-2008, 10:57 PM

Will take 292 PS bracket, pump, wp pulley - $130 SOLD!!

newbraunie · 09-29-2008, 11:00 PM

Quote:

Originally Posted by newbraunie

Will take 292 PS bracket, pump, wp pulley - $130 SOLD!!

PM sent

70inline6 · 09-30-2008, 07:51 AM

Quote:

Originally Posted by newbraunie

PM sent

Sorry Pickmup... Reply sent Chris, Thanks.

70inline6 · 09-30-2008, 05:26 PM

Jeremy - parts went out at lunchtime today USPS. Thank you.

Chris - payment received. Parts will go out tomorrow (10/1). Thanks.

**PICKMUP** · 09-30-2008, 11:26 PM

He did good & stepped up to say he will take them...just like you are supposed to. I lost out because I was trying to negotiate...that doesn't count & I agree. Nice 292 setup, too.

newbraunie · 10-01-2008, 08:46 PM

Quote:

Originally Posted by PICKMUP

He did good & stepped up to say he will take them...just like you are supposed to. I lost out because I was trying to negotiate...that doesn't count & I agree. Nice 292 setup, too.

PICKMUP - my comment was not meant as rub. I too am inclined to haggle on price when seller says "make offer".

newbraunie · 10-07-2008, 11:11 PM

70inline6 - recieved parts today, Thank You.
I probably should have asked this prior to purchasing. What year truck/engine are these brackets from? I currently have PS on my truck, (listed on options sticker), this is not a conversion. PO rigged up with SB bracket and custom welded brackets (?? what happened to org brackets I dunno stolen, lost??) I have never seen OE brackets for 292 PS. What is the small pulley for that I recieved? (not pictured in org post). Initial look at engine mounting holes and brackets has me confused. Do you have any pics of this set up installed? I cannot find any useful pics in assembly manual. I have a 69 K10 4X4.

70inline6 · 10-08-2008, 07:31 AM

That's the way I bought it off the list about six months ago. I was told it was for a 292 and with my lack of knowledge, I assumed it would fit a 250. Once I tried to line up the block bracket I saw it was too long for the 250 (to account for the tallness of the block of the 292 I assume) and then later researched and read they were not the same.

I have never seen pics of a 292 setup, only the 250 ones from some of the other trucks on here. I assumed the small pulley was for swapping onto the alternator and that it must ride further forward with this application and be a double-belt setup. I really don't know, only went with what I was told off of this list.

newbraunie · 10-08-2008, 02:07 PM

I think I have it figured out. The main bracket fits perfect so it is for a 292. The setup came with two adjusting brackets, one which will work for the pump only and bolts to the main PS bracket. The other one bolts to the water pump and ties into the alternator and PS pump with adjusting slots for both. I am going to use the 2nd one since it lets the pump sit in a more upright position. My PS pump has slightly different mounting holes, so I am going to use the one you sent. I do not know if I will need the double groove alternator pulley yet. I have never heard of PS running on 2 belts. Anyways, thanks for a very complete set up!

brossow · 09-30-2008, 11:27 PM

If you'll do $75 shipped, I'll take the HVAC stuff. Let me know....

Brent

70inline6 · 10-01-2008, 09:01 AM

Quote:

Originally Posted by brossow

If you'll do $75 shipped, I'll take the HVAC stuff. Let me know....

Brent

Oh alright... PM sent Brent.

brossow · 10-01-2008, 09:11 AM

Payment sent via PayPal. Thanks!

70inline6 · 10-01-2008, 09:26 AM

Sold it all, Thank you everyone.

*chevy29267truck* · 10-18-2008, 06:15 PM

do you have any more 292 engine parts or a 1967 or 1968 chevy 292 engine

09-29-2008, 05:28 PM	#1
70inline6 Registered User Join Date: Jan 2008 Location: Pell City, AL Posts: 255	292 PS gear, AC controls, Interior stuff Price is Shipped for all items - Make offer... 292 PS bracket, pump, wp pulley - $130 (Sold) Gauge bazel panel (new) - $35 (Sold) 6 cyl HEI, cap, coil (used) - $50 (Sold) Last edited by 70inline6; 09-30-2008 at 05:28 PM.

09-29-2008, 05:29 PM	#2
70inline6 Registered User Join Date: Jan 2008 Location: Pell City, AL Posts: 255	Re: 292 PS gear, AC controls, Interior stuff More - HVAC control with free moving cables, nice lens, side outlets, center outlet and duct. (SOLD!) Last edited by 70inline6; 10-01-2008 at 09:26 AM.

09-29-2008, 07:06 PM	#3
jeremy zander Registered User Join Date: Oct 2005 Location: shakopee minnesota Posts: 515	Re: 292 PS gear, AC controls, Interior stuff I will take gauge panel,cap,coil seatbelts,visors,armrests....PM me info..!!!..for some reason i cannot resubscribe to my subscriction,. so bare with me till i figure it out,,,,i hate being a pinky!!!!! __________________ WTB 1972 CHEVY 3/4 4X4 1971 chevy c30 4x4 NAPCO (project) 1972 chevy 3/4 4x4 350/350 4spd, tach, tow hooks,radio delete,heat delete,hubcaps,lockers 1972 chevy 3/4 4x4 383/350 dads original farm truck tilt,tach,tow hooks,hubcaps,radio delete,heat delete 2006 chevy LBZ crew cab duramax,4 inch,beadlocks 2015 chevy tahoe Z71 my fifth one,love em 2016 chevy 2500HD Z71 LTZ duramax midnite 2018 chevy suburban Z71 midnite

09-29-2008, 08:33 PM	#5
jeremy zander Registered User Join Date: Oct 2005 Location: shakopee minnesota Posts: 515	Re: 292 PS gear, AC controls, Interior stuff payment sent via paypal thank you!!!!!!! __________________ WTB 1972 CHEVY 3/4 4X4 1971 chevy c30 4x4 NAPCO (project) 1972 chevy 3/4 4x4 350/350 4spd, tach, tow hooks,radio delete,heat delete,hubcaps,lockers 1972 chevy 3/4 4x4 383/350 dads original farm truck tilt,tach,tow hooks,hubcaps,radio delete,heat delete 2006 chevy LBZ crew cab duramax,4 inch,beadlocks 2015 chevy tahoe Z71 my fifth one,love em 2016 chevy 2500HD Z71 LTZ duramax midnite 2018 chevy suburban Z71 midnite

09-29-2008, 08:56 PM	#6
70inline6 Registered User Join Date: Jan 2008 Location: Pell City, AL Posts: 255	Re: 292 PS gear, AC controls, Interior stuff Payment received. Parts will go out tomorrow. Thanks Jeremy!

09-29-2008, 10:54 PM	#7
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,159	Re: 292 PS gear, AC controls, Interior stuff I would offer $100 for the PS...

09-29-2008, 10:57 PM	#8
newbraunie Registered User Join Date: Aug 2008 Location: Central TX Posts: 393	Re: 292 PS gear, AC controls, Interior stuff Will take 292 PS bracket, pump, wp pulley - $130 SOLD!!

09-30-2008, 05:26 PM	#11
70inline6 Registered User Join Date: Jan 2008 Location: Pell City, AL Posts: 255	Re: 292 PS gear, AC controls, Interior stuff Jeremy - parts went out at lunchtime today USPS. Thank you. Chris - payment received. Parts will go out tomorrow (10/1). Thanks.

09-30-2008, 11:26 PM	#12
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,159	Re: 292 PS gear, AC controls, Interior stuff He did good & stepped up to say he will take them...just like you are supposed to. I lost out because I was trying to negotiate...that doesn't count & I agree. Nice 292 setup, too.

10-07-2008, 11:11 PM	#14
newbraunie Registered User Join Date: Aug 2008 Location: Central TX Posts: 393	Re: 292 PS gear, AC controls, Interior stuff 70inline6 - recieved parts today, Thank You. I probably should have asked this prior to purchasing. What year truck/engine are these brackets from? I currently have PS on my truck, (listed on options sticker), this is not a conversion. PO rigged up with SB bracket and custom welded brackets (?? what happened to org brackets I dunno stolen, lost??) I have never seen OE brackets for 292 PS. What is the small pulley for that I recieved? (not pictured in org post). Initial look at engine mounting holes and brackets has me confused. Do you have any pics of this set up installed? I cannot find any useful pics in assembly manual. I have a 69 K10 4X4.

10-08-2008, 07:31 AM	#15
70inline6 Registered User Join Date: Jan 2008 Location: Pell City, AL Posts: 255	Re: 292 PS gear, AC controls, Interior stuff That's the way I bought it off the list about six months ago. I was told it was for a 292 and with my lack of knowledge, I assumed it would fit a 250. Once I tried to line up the block bracket I saw it was too long for the 250 (to account for the tallness of the block of the 292 I assume) and then later researched and read they were not the same. I have never seen pics of a 292 setup, only the 250 ones from some of the other trucks on here. I assumed the small pulley was for swapping onto the alternator and that it must ride further forward with this application and be a double-belt setup. I really don't know, only went with what I was told off of this list.

10-08-2008, 02:07 PM	#16
newbraunie Registered User Join Date: Aug 2008 Location: Central TX Posts: 393	Re: 292 PS gear, AC controls, Interior stuff I think I have it figured out. The main bracket fits perfect so it is for a 292. The setup came with two adjusting brackets, one which will work for the pump only and bolts to the main PS bracket. The other one bolts to the water pump and ties into the alternator and PS pump with adjusting slots for both. I am going to use the 2nd one since it lets the pump sit in a more upright position. My PS pump has slightly different mounting holes, so I am going to use the one you sent. I do not know if I will need the double groove alternator pulley yet. I have never heard of PS running on 2 belts. Anyways, thanks for a very complete set up!

09-30-2008, 11:27 PM	#17
brossow Amateur Rust Fighter Join Date: Sep 2007 Location: Mankato, MN Posts: 1,088	Re: 292 PS gear, AC controls, Interior stuff If you'll do $75 shipped, I'll take the HVAC stuff. Let me know.... Brent __________________ Brent '72 Chevy SWB stepside - [ Build Thread ] '79 ChevMC SWB fleetside - [ Build Thread ] '64 Chevy SWB fleetside & '66 Chevy SWB stepside (waiting in the wings...)

10-01-2008, 09:11 AM	#19
brossow Amateur Rust Fighter Join Date: Sep 2007 Location: Mankato, MN Posts: 1,088	Re: 292 PS gear, AC controls, Interior stuff Payment sent via PayPal. Thanks! __________________ Brent '72 Chevy SWB stepside - [ Build Thread ] '79 ChevMC SWB fleetside - [ Build Thread ] '64 Chevy SWB fleetside & '66 Chevy SWB stepside (waiting in the wings...)

10-01-2008, 09:26 AM	#20
70inline6 Registered User Join Date: Jan 2008 Location: Pell City, AL Posts: 255	Re: 292 PS gear, AC controls, Interior stuff Sold it all, Thank you everyone. Last edited by 70inline6; 10-02-2008 at 02:38 PM.



Register or Log In To remove these advertisements.

10-18-2008, 06:15 PM	#21
chevy29267truck Account Suspended Join Date: Sep 2008 Location: Alva Florida Posts: 668	Re: 292 PS gear, AC controls, Interior stuff do you have any more 292 engine parts or a 1967 or 1968 chevy 292 engine

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.