Gas Pedal - Aftermarket Photos & ideas Please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1968SWBBigBlock · 10-01-2008, 09:12 AM

I am looking at converting over to a cable style set up and getting rid of the rod on the throttle assembly.
What pedals have you folks used and what made an easy install with the motor installed already?
I would like to hear the good and the bad stories.

Thanks!!!

crawdadfox · 10-01-2008, 09:19 AM

I used a Lokar set-up on my Nova. Super easy to istall with the motor in and works great!

1968SWBBigBlock · 10-01-2008, 09:26 AM

Which lokar pedal did you use?

crawdadfox · 10-01-2008, 11:52 AM

They had just came out with a bolt in set up for the nova, but the have universal set up's that will work for you ! They are in TN. and there toll free # is 1-877-469-7440

cameeks · 10-01-2008, 02:49 PM

Here is the way I did mine

LINK

my67chevytruck · 10-01-2008, 04:42 PM

I went with a lokar setup in my 56, clean install and nice looking.
will probably go with the mod Cameeks linked to putters mod on my sons 67

10-01-2008, 09:12 AM	#1
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Gas Pedal - Aftermarket Photos & ideas Please I am looking at converting over to a cable style set up and getting rid of the rod on the throttle assembly. What pedals have you folks used and what made an easy install with the motor installed already? I would like to hear the good and the bad stories. Thanks!!! __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

10-01-2008, 09:19 AM	#2
crawdadfox Registered User Join Date: Aug 2008 Location: New Orleans Louisiana.....a great place to visit but you wouldn't want to live here!!! Posts: 883	Re: Gas Pedal - Aftermarket Photos & ideas Please I used a Lokar set-up on my Nova. Super easy to istall with the motor in and works great!

10-01-2008, 09:26 AM	#3
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Gas Pedal - Aftermarket Photos & ideas Please Which lokar pedal did you use? __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

10-01-2008, 11:52 AM	#4
crawdadfox Registered User Join Date: Aug 2008 Location: New Orleans Louisiana.....a great place to visit but you wouldn't want to live here!!! Posts: 883	Re: Gas Pedal - Aftermarket Photos & ideas Please They had just came out with a bolt in set up for the nova, but the have universal set up's that will work for you ! They are in TN. and there toll free # is 1-877-469-7440

10-01-2008, 02:49 PM	#5
cameeks Long Fleet Club Join Date: Aug 2006 Location: Deer Park, TX Posts: 5,666	Re: Gas Pedal - Aftermarket Photos & ideas Please Here is the way I did mine *LINK* __________________ Chris Meeks '69 Chevy Custom/10 Long Bed <-- Thread of the work I did before selling. Truck is now finished to the new owners design and running around. I was shown some pictures of the finished product. At least it survived the junk yard. FAQ Index by Krue Site Vendors Subscribe Here Forum Rules Last edited by cameeks; 10-01-2008 at 02:49 PM.

10-01-2008, 04:42 PM	#6
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Gas Pedal - Aftermarket Photos & ideas Please I went with a lokar setup in my 56, clean install and nice looking. will probably go with the mod Cameeks linked to putters mod on my sons 67 __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.