woo hoo look what i got - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mooneyes · 11-20-2002, 08:12 PM

traded my edelbrock elites for them

mooneyes · 11-20-2002, 08:13 PM

woo hoo

67cst · 11-20-2002, 08:24 PM

cool, do they still make those? or are they pretty rare?

imaindianoutlaw · 11-20-2002, 08:26 PM

Moon, I have always ran them on my Pontiacs! I love them! Panted them Brite red and polished the ribs and MT on the top! Sweet! Is that snow?

mooneyes · 11-20-2002, 08:56 PM

67 cst...not sure if they still make em or not...jegs dont list them any more ..the only other place i used to see them is PAW..not sure if they still have them or not...might be rare nowadays not sure..i remember about 15 yrs ago they were everywhere...
no thats not snow...lol..... thats rocks around my wood burner

amstaff · 11-20-2002, 10:30 PM

I have them on the 72 C10 I just picked up, and they are immaculate! What's the story behind them????

Bowed · 11-21-2002, 12:15 AM

I would like to Know the story behind them too. I have a set on my 454 and did not know they were special items .

*Randy70C-10* · 11-21-2002, 10:36 AM

I thought they still made them, I've had many pairs of those. The M/T (for you young guys) is Mickey Thompson. Here is a link for more info: http://www.thompson-motorsports.com/mt.html

imaindianoutlaw · 11-21-2002, 10:45 AM

I wish I could get my hands on some of that Old racing pontiacd stuff Mickey made! $$$

**Desert Rat** · 11-21-2002, 01:58 PM

I just gave a set of SBC ones to my stepdad,i may have nother set.I have a few sets of BBC ones id be more than happy to trade for vintage CalCustoms,old Edelbrocks,also i have some old Weiands and Holleys.The sbc ones are available new through Holley.

sgtjed · 11-21-2002, 05:52 PM

i got a set of m/t in my garage. came off of a 73 nova i bought back in the 80's. didnt know they were so rare untill a friend wanted to trade me an intake for them,cause he couldnt find a set. well i figured i would just hang onto them. i also have a set of alum ones on my truck i have never seen before,mayby you guys could tell me what they are?

mooneyes · 11-24-2002, 08:00 PM

mid to late 70's vette maybe?????

sgtjed · 11-24-2002, 08:42 PM

na the vettes look like the ones used on the 70 lt-1 camaro 350.
they are finned allum though but they have a circle at one end that has chevrolet in em. i think these are some aftermarket ones,but i have no clue who makes em,i like the way they look.

Longhorn Man · 11-25-2002, 12:28 AM

Those kinda look like the edelbrock finned covers...Kinda

>X< · 11-25-2002, 10:45 AM

i have some like sgtjed's, they were on my 402 in my 72 when i bought it.

jhow66 · 11-27-2002, 08:35 PM

got a set on my 56

*stepside68* · 11-27-2002, 09:09 PM

i got a set of m/t too

**Desert Rat** · 11-27-2002, 10:52 PM

The SB ones appear to be Wieands or calcustoms it should say on the backside.vettes had thinner closer together fins without a logo area in the middle.The M/T big and small block are still available inthe last year ive had many sets of the SBC one i sell them for $25 the BB ones i sell for $50,they are available new through Holleys website

11-20-2002, 08:12 PM	#1
mooneyes Registered User Join Date: Jan 2002 Location: Slippery Rock PA USA Posts: 1,692	woo hoo look what i got traded my edelbrock elites for them Attached Images __________________ Ken Lyons, Slippery rock pa 68 short step 327 t10 4 gear 72 2wd blazer project 70 lwb 305/700r driver 78 caprice project 02 cavalier D.D ( hate it!!)

11-20-2002, 08:13 PM	#2
mooneyes Registered User Join Date: Jan 2002 Location: Slippery Rock PA USA Posts: 1,692	woo hoo Attached Images __________________ Ken Lyons, Slippery rock pa 68 short step 327 t10 4 gear 72 2wd blazer project 70 lwb 305/700r driver 78 caprice project 02 cavalier D.D ( hate it!!)

11-20-2002, 08:24 PM	#3
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,302	cool, do they still make those? or are they pretty rare? __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

11-20-2002, 08:26 PM	#4
imaindianoutlaw GMC SHORT FLEET F/S Join Date: Jun 2000 Location: SOUTH WILLIAMSPORT PENNSYLVANNIA Posts: 2,117	Moon, I have always ran them on my Pontiacs! I love them! Panted them Brite red and polished the ribs and MT on the top! Sweet! Is that snow? __________________ CHARLES WADE HEIN HVACR FOREMAN. LEWISBURG U.S.P.

11-20-2002, 08:56 PM	#5
mooneyes Registered User Join Date: Jan 2002 Location: Slippery Rock PA USA Posts: 1,692	67 cst...not sure if they still make em or not...jegs dont list them any more ..the only other place i used to see them is PAW..not sure if they still have them or not...might be rare nowadays not sure..i remember about 15 yrs ago they were everywhere... no thats not snow...lol..... thats rocks around my wood burner __________________ Ken Lyons, Slippery rock pa 68 short step 327 t10 4 gear 72 2wd blazer project 70 lwb 305/700r driver 78 caprice project 02 cavalier D.D ( hate it!!)

11-20-2002, 10:30 PM	#6
amstaff Registered User Join Date: Oct 2002 Location: State College, PA Posts: 178	I have them on the 72 C10 I just picked up, and they are immaculate! What's the story behind them????

11-21-2002, 12:15 AM	#7
Bowed Registered User Join Date: Oct 2002 Location: where it's hot Posts: 1,059	I would like to Know the story behind them too. I have a set on my 454 and did not know they were special items .

11-21-2002, 10:36 AM	#8
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	I thought they still made them, I've had many pairs of those. The M/T (for you young guys) is Mickey Thompson. Here is a link for more info: http://www.thompson-motorsports.com/mt.html

11-21-2002, 10:45 AM	#9
imaindianoutlaw GMC SHORT FLEET F/S Join Date: Jun 2000 Location: SOUTH WILLIAMSPORT PENNSYLVANNIA Posts: 2,117	I wish I could get my hands on some of that Old racing pontiacd stuff Mickey made! $$$ __________________ CHARLES WADE HEIN HVACR FOREMAN. LEWISBURG U.S.P.

11-21-2002, 01:58 PM	#10
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	I just gave a set of SBC ones to my stepdad,i may have nother set.I have a few sets of BBC ones id be more than happy to trade for vintage CalCustoms,old Edelbrocks,also i have some old Weiands and Holleys.The sbc ones are available new through Holley.

11-21-2002, 05:52 PM	#11
sgtjed What if? Join Date: Oct 2002 Location: Choctaw,Oklahoma Posts: 649	i got a set of m/t in my garage. came off of a 73 nova i bought back in the 80's. didnt know they were so rare untill a friend wanted to trade me an intake for them,cause he couldnt find a set. well i figured i would just hang onto them. i also have a set of alum ones on my truck i have never seen before,mayby you guys could tell me what they are? Attached Images

11-24-2002, 08:00 PM	#12
mooneyes Registered User Join Date: Jan 2002 Location: Slippery Rock PA USA Posts: 1,692	mid to late 70's vette maybe????? __________________ Ken Lyons, Slippery rock pa 68 short step 327 t10 4 gear 72 2wd blazer project 70 lwb 305/700r driver 78 caprice project 02 cavalier D.D ( hate it!!)

11-24-2002, 08:42 PM	#13
sgtjed What if? Join Date: Oct 2002 Location: Choctaw,Oklahoma Posts: 649	na the vettes look like the ones used on the 70 lt-1 camaro 350. they are finned allum though but they have a circle at one end that has chevrolet in em. i think these are some aftermarket ones,but i have no clue who makes em,i like the way they look.

11-25-2002, 12:28 AM	#14
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Those kinda look like the edelbrock finned covers...Kinda

11-25-2002, 10:45 AM	#15
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	i have some like sgtjed's, they were on my 402 in my 72 when i bought it. __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.



Register or Log In To remove these advertisements.

11-27-2002, 08:35 PM	#16
jhow66 Registered User Join Date: Jun 2002 Location: Knoxville Tenn. Posts: 3,058	M/T covers got a set on my 56 Attached Images __________________ 56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer

11-27-2002, 09:09 PM	#17
stepside68 Account Suspended Join Date: Feb 2002 Location: Jonesville NC Posts: 149	i got a set of m/t too

11-27-2002, 10:52 PM	#18
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	The SB ones appear to be Wieands or calcustoms it should say on the backside.vettes had thinner closer together fins without a logo area in the middle.The M/T big and small block are still available inthe last year ive had many sets of the SBC one i sell them for $25 the BB ones i sell for $50,they are available new through Holleys website

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.