![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Engine n00b
Join Date: Feb 2008
Location: Austin
Posts: 1,031
|
Took her to the shop for some tweaking...
new Skip White distributor installed, new plug wires, re-sealed and filled rear end.
Retuned as well. Seems to pull a good bit harder on the butt dyno. Two things: 1) The dizzy is LOUD. Sounds like a hissing sound of air leaking in the cab. Odd (my engine is STOCK, so its pretty quiet) 2) I now have a studder/jump when in D, and full on the brakes idling. It even died on me once. The mechanic said to bump up my idle on the carb. sounded like a semi-meh fix. Any thoughts? Also, got my compression tested. driver side, front to back: 120/130/120/130 Pass side: 115/120/105/110 Not bad for a 150k mile 35 year old engine. |
![]() |
![]() |
![]() |
#2 |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,513
|
Re: Took her to the shop for some tweaking...
-
Are you sure you didn't break or disconnect a vacuum line? I would check that out pretty close.... LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
![]() |
![]() |
![]() |
#3 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Took her to the shop for some tweaking...
the hissing makes me think of the carb not being adjusted right
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|