![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jan 2006
Location: Dallas
Posts: 504
|
New Engine (6 Cylinder Club)
I was asking about inline 6 parts at a junkyard the other day and a guy who was sitting around the place said he had a 250 sitting in his shop if I wanted to take a look. He lived just around the corner so I followed him over and he had a complete 250 inline 6 on an engine stand next to some other really sweet engines (Chevy 454's, Buick 455's, a Mopar 440 etc). He had alot of junk and alot of cool vintage stuff out in his shop, and his personal mini junk yard. He has a 1953 Chevy and a 1935 Chevy Truck, a mid-70’s hearse, and another older truck too.
He said some guys drove in from Colorado in a 1950 model truck then pulled the six out to put a 350 in the truck, but the engine was running just fine when pulled. He put it in his garage where it has been sitting for 3 years, (he is a gunna-do-it kind of guy). We drained the oil which was clean, we put a couple of bolts in the balancer and used a cheater bar and spun the engine freely so it has not locked or seized, and he said he would take $150 for it complete. That's an awesome deal for a running engine and a decent deal for a roll of the dice engine. The real reason I wanted it was sitting on top of this 6 cylinder is an Offenhauser 4 barrel intake manifold, and a Holly 390 carb! The carb will surely need a rebuild but the intake is worth what I will be paying for the whole engine so I figure if it ran, that will be a bonus. It is a mid 70's model block with HEI ignition. I ran the block #'s on it and it is a Mercruiser 165hp 250! SCORE! That means extra heavy duty and a marine cam for some torque! I got running on a run stand, and it runs strong... I left the 4bbl intake on it since everything was already on there, and I got an adapter and bolted a good 2bbl I had laying around to it. I’ll have the 4bbl rebuilt as soon as I can. I got everything all rigged up, I even had a full exhaust setup with glasspacks on it sticking out the garage door. I primed the cylinders with a little bit of oil, and hand spun it slowly and everything was turning freely. Took about 20 min of off and on trying to start it and then it sprang to life and idled perfectly. No smoke at all after burning off the little bit of oil I put in the cylinders. I lightly revved it and it wrapped up quickly. Good oil pressure. No stumbling or sputtering at all, just felt super powerful. Adjusted the valves and all is well! Here's a video of it running. I got the engine stripped down and cleaned and painted yesterday, and while I was doing it, I got a call about the messed up engine that is in the truck now, and he is supposed to come over Wednesday to pick it up. I left the cutout rocker cover on it for now, in case I want to mess with the valves some more once it is in, plus the chain always drags on the valve cover when installing the engine anyway. I am going to clean up the classic valve cover I have with the Chevrolet script on it and put that one on.
__________________
_______________ Thomas '78 Silverado '74 Monte Carlo '47 Teardrop Trailer East Texas Classics Local Club |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Aug 2005
Location: tulsa OK
Posts: 3,070
|
Re: New Engine (6 Cylinder Club)
nice. i always like to see engines run
![]() |
![]() |
![]() |
![]() |
#3 |
Active Member
![]() Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: New Engine (6 Cylinder Club)
Wow! What a deal! Some times you just plain get lucky like that. Sounds awesome. I've got a 250 in my 68 GMC that I had bored out to .030 over. Not because it needed it (28K) miles on it) but I wanted a litte more oomph.
I like your setup. I wonder it it came with the offenhauser and carb originally? |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Feb 2007
Location: Cali Central Coast
Posts: 5,191
|
Re: New Engine (6 Cylinder Club)
Very nice - I love those 6's - some day I'll have another.* They run forever.
__________________
'67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD ![]() Click here to support the board Philippians 4: 6-7 |
![]() |
![]() |
![]() |
#5 |
Old Duffer
![]() Join Date: Mar 2003
Location: Maine
Posts: 1,821
|
Re: New Engine (6 Cylinder Club)
Good find! That would have been worth the purchase even if all you did was stash it in a corner!
__________________
'68 Short C20 Flatbed Dually w/ 292 4bbl, Langdon cast headers, and WC T5 trans. '81 G10 Shorty Van "Good judgement comes from experience, and a lot of that comes from bad judgement." Will Rogers "Under promise, then over achieve." |
![]() |
![]() |
![]() |
#6 |
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,673
|
Re: New Engine (6 Cylinder Club)
What an awesome score!!!
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jan 2006
Location: Dallas
Posts: 504
|
Re: New Engine (6 Cylinder Club)
I've got three more stashed in the corner too lol... The offenhauser definitely was an aftermarket item too, originally it woulda had the special boat intake on it. They guy that was going to buy my old engine just crapped out on me, but I am thinking about yanking it Wednesday anyway. I am looking forward to driving it!
__________________
_______________ Thomas '78 Silverado '74 Monte Carlo '47 Teardrop Trailer East Texas Classics Local Club |
![]() |
![]() |
![]() |
#8 |
laying low
![]() Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,267
|
Re: New Engine (6 Cylinder Club)
It sounds good Thomas.
![]()
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
![]() |
![]() |
![]() |
#9 |
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Re: New Engine (6 Cylinder Club)
Nice score and what a great looking I6!
__________________
-Nate ![]() 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) |
![]() |
![]() |
![]() |
#10 |
Account Suspended
Join Date: Sep 2008
Location: Alva Florida
Posts: 668
|
Re: New Engine (6 Cylinder Club)
greart find dose that junkyard have and 292 inline six engine i have been trying too find a 1967 or 1968 chevy 292 engine with every thing still on the engine for my 1967 chevy 3/4 ton long wheel base 4speed truck
|
![]() |
![]() |
![]() |
#11 | |
Registered User
Join Date: Jan 2006
Location: Dallas
Posts: 504
|
Re: New Engine (6 Cylinder Club)
Quote:
The engine is going in today, I don't want to wait any longer!
__________________
_______________ Thomas '78 Silverado '74 Monte Carlo '47 Teardrop Trailer East Texas Classics Local Club |
|
![]() |
![]() |
![]() |
#12 | ||
Registered User
Join Date: Aug 2008
Location: Thunder Bay, Ontario
Posts: 94
|
Re: New Engine (6 Cylinder Club)
Quote:
I'll take mine with an inline. Strider As noted below, you must be a subscribing member to post For Sale items. Copied from the rules: Quote:
Last edited by LONGHAIR; 02-02-2009 at 08:04 PM. |
||
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Apr 2008
Location: Angleton, TX
Posts: 2,219
|
Re: New Engine (6 Cylinder Club)
Hello Strider, Welcome to the board. However you are not a paid subscriber so you can't advertise stuff for sale here. Not trying to police you but I just thought I would give you a heads up before the moderators get onto you.
|
![]() |
![]() |
![]() |
#14 | |
Registered User
Join Date: Aug 2008
Location: Thunder Bay, Ontario
Posts: 94
|
Re: New Engine (6 Cylinder Club)
Quote:
Whoops..............ahahahhahaa I did not know that. What does it cost to be a paid subscriber? Thanks for the info. How do I become one? Guess it'll go on ebay then! |
|
![]() |
![]() |
![]() |
#15 |
Account Suspended
Join Date: Sep 2008
Location: Alva Florida
Posts: 668
|
Re: New Engine (6 Cylinder Club)
oh ok
|
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Sep 2008
Location: Mobile, Al.
Posts: 687
|
Re: New Engine (6 Cylinder Club)
Great deal,congratulations.
|
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Jul 2008
Location: Gate City VA
Posts: 576
|
Re: New Engine (6 Cylinder Club)
__________________
Mitch 22yrs. Young 1970 GMC Short-Step 350/TH350 Combo. . ![]() Current Project 68 Gmc "Second Chance" Go to my 68 GMC Shorty Rebuild Thread http://67-72chevytrucks.com/vboard/s...39#post6341739 |
![]() |
![]() |
![]() |
#18 |
Retiredoldfarttankerguy
![]() Join Date: Mar 2007
Location: Coeur d'Alene Idaho
Posts: 148
|
Re: New Engine (6 Cylinder Club)
Nice - A super score in my book - Congrats! I've got a 250 in my 68 and 292 in the 71, plenty of power and reliability to get you down the road... Great story.
|
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Jan 2006
Location: Dallas
Posts: 504
|
Re: New Engine (6 Cylinder Club)
Thanks guys, nice engine too Mitch!
Wednesday I pulled the old 250 and dropped the new 250 in. We just got the bell housing and motor mounts bolted up right when the rain came in so it was awesome timing. I am going to button it up tomorrow morning. Looking forward to feeling what this kind of power band feels like being a marine engine.
__________________
_______________ Thomas '78 Silverado '74 Monte Carlo '47 Teardrop Trailer East Texas Classics Local Club |
![]() |
![]() |
![]() |
#20 |
Senior Member
Join Date: Sep 2004
Location: Terrell, TX
Posts: 1,967
|
Re: New Engine (6 Cylinder Club)
I got a good feeling about this engine Thomas! When are you going to fire it up?
__________________
Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps. |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Jan 2006
Location: Dallas
Posts: 504
|
Re: New Engine (6 Cylinder Club)
I'm working on it today, I am going to compare those two harmonic balancers first and see if there are any differences, if not it might have just gotten hung up on it when we were putting it on, and that's what you felt, and that's what busted. I'll try to lube it up more on the next one.
I will either do that, OR do everything else that is easy, and then tackle the harmonic balancer last since it is the bear and I will know that it is the last thing. I'm out in the garage today either way though. I'm sure I'll post a movie when it's running haha
__________________
_______________ Thomas '78 Silverado '74 Monte Carlo '47 Teardrop Trailer East Texas Classics Local Club Last edited by 2bits; 10-25-2008 at 12:05 PM. |
![]() |
![]() |
![]() |
#22 |
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,673
|
Re: New Engine (6 Cylinder Club)
Sweeeeet! Lookin' forward to it!
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... |
![]() |
![]() |
![]() |
#23 |
Retired Air Force 87-09
Join Date: Feb 2007
Location: Bonaire, Georgia 31005
Posts: 284
|
Re: New Engine (6 Cylinder Club)
Sounds healthy. Nice score.
|
![]() |
![]() |
![]() |
#24 |
Senior Member
![]() Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,280
|
Re: New Engine (6 Cylinder Club)
Nice find. I think I paid more than that for a 390 Holley, Clifford Research headers and Offy intake back in the day . [1978]
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. |
![]() |
![]() |
![]() |
#25 |
Registered User
Join Date: Apr 2003
Location: Central PA....In the Berg of Nisbet
Posts: 790
|
Re: New Engine (6 Cylinder Club)
I have a 250 in my K-20, and although some days I wish it was a 292, I'll take it over a small block for my uses any day! It works well, economical, and rock solid reliable!
__________________
'72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!! |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|