![]() |
|
![]() |
#1 |
1971 4X4
Join Date: Jan 2008
Location: Winona, MN
Posts: 112
|
E-Brake Help
I'm finishing up on my truck after 2 years and I just tore into the rear brakes. I took apart the drivers side and replaced what I needed to and moved on to the other side. When I got the drum off I noticed that the e-brake cable wasn't attached to anything. I take it I'm missing the e-brake lever in the drum? I would think that is suppose to be on both wheels? This is a picture of the drivers side brake showing what is missing.
__________________
MN ROOKY 1971 Chevy 3/4 4X4, 4" lift, 33's ![]() 2001 Chevy 3/4 4X4 HD, 33's (Wife's Truck) |
![]() |
![]() |
![]() |
#2 |
Hollister Road Co.
Join Date: Apr 2005
Location: Houston
Posts: 6,134
|
Re: E-Brake Help
Your missing the crossbar and the spring. I think you can get both at the parts store
|
![]() |
![]() |
![]() |
#3 |
1971 4X4
Join Date: Jan 2008
Location: Winona, MN
Posts: 112
|
Re: E-Brake Help
Neither side had the cross bar or springs. Do those parts go on all drum brakes? As you can tell this is my first brake job. If it matters it's a 1971 3/4 4x4
Thanks jeff
__________________
MN ROOKY 1971 Chevy 3/4 4X4, 4" lift, 33's ![]() 2001 Chevy 3/4 4X4 HD, 33's (Wife's Truck) Last edited by MN Rooky; 10-28-2008 at 11:17 PM. |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: E-Brake Help
yes most all drum brakes will have the crossbar and spring//print out the picture take it with you to a NAPA store and they should have everything you need in stock
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Nov 2006
Location: Springfield/Kansas City
Posts: 1,842
|
Re: E-Brake Help
Good luck at the parts store, most likely the bar will be too small. I had to go the the salvage yard to find mine.
|
![]() |
![]() |
![]() |
#6 |
1971 4X4
Join Date: Jan 2008
Location: Winona, MN
Posts: 112
|
Re: E-Brake Help
yep,
The parts are too short at the part store. I will be running without a e-brake until the salvage yard god smile down on me. So I will be looking for 2 crossbars, springs and right side e-brake lever. It may take a while to find them around this area. Thanks for the drum brake 101.
__________________
MN ROOKY 1971 Chevy 3/4 4X4, 4" lift, 33's ![]() 2001 Chevy 3/4 4X4 HD, 33's (Wife's Truck) |
![]() |
![]() |
![]() |
#7 |
classic=of recognized value
Join Date: Sep 2008
Location: Wichita, KS
Posts: 317
|
Re: E-Brake Help
If I were you I would spring for a wheel cylinder rebuild kit as it looks like yours are leaking. I also always get a new spring kit (they are only about $3 per side). You might as well get it done right if it is apart anyway.
|
![]() |
![]() |
![]() |
#8 |
classic=of recognized value
Join Date: Sep 2008
Location: Wichita, KS
Posts: 317
|
Re: E-Brake Help
Here's a diagram that might help with terminology. This is what your brakes should look like.
Last edited by Stock72c10; 11-02-2008 at 10:32 PM. |
![]() |
![]() |
![]() |
#9 |
1971 4X4
Join Date: Jan 2008
Location: Winona, MN
Posts: 112
|
Re: E-Brake Help
Thanks,
I got those parts replaced.
__________________
MN ROOKY 1971 Chevy 3/4 4X4, 4" lift, 33's ![]() 2001 Chevy 3/4 4X4 HD, 33's (Wife's Truck) |
![]() |
![]() |
![]() |
#10 |
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,673
|
Re: E-Brake Help
Hey, I think I have all those parts you need and was about to set them out on the curb with the rest of the scrap steel. It appears you need 2 crossbars, the PS ebrake adjuster and the spring it rests on? Let me know and I'll clean it all up and send it to ya!
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... |
![]() |
![]() |
![]() |
#11 |
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,673
|
Re: E-Brake Help
So guys will the 1/2T parts work for him or will they be too short?
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... |
![]() |
![]() |
![]() |
#12 |
Old Skool Club
![]() Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
Re: E-Brake Help
Before you head to the parts store, you should know both the diameter of your drums and the width of the shoes.
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. |
![]() |
![]() |
![]() |
#13 |
1971 4X4
Join Date: Jan 2008
Location: Winona, MN
Posts: 112
|
Re: E-Brake Help
Good progress today. I got the brakes put back together (without the parking brake) this morning. My wife helped me bleed them out.
Then I worked on getting the truck started. I have worked on the truck for the past 2 years. Happy to say I got it started. Tomorrow I will try to take it for a drive around the farm.
__________________
MN ROOKY 1971 Chevy 3/4 4X4, 4" lift, 33's ![]() 2001 Chevy 3/4 4X4 HD, 33's (Wife's Truck) |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|