Cross Sills for Long Bed, Fleetside, Good Condition in San Diego, CA - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevy_mike · 11-10-2008, 12:04 PM

I have finally taken my wood floor bed apart. I am replace the wood floor with a steel one and have no need for the cross sills. All are in good shape with just minor surface rust as seen in the pictures. Would clean up very nicely.

Would perfer local pick up in San Diego, CA. They are kind of heavy when all together and I am not sure how I would even package them for shipping. Buyer would pay shipping and packaging costs.

I think these would also work for a short bed, fleetside by not using all of the cross sills but buyer would need to verify this info.

Price SOLD. Thanks for looking.

msgross · 11-10-2008, 01:24 PM

wow, dirt cheap pricing... ttt for you and a good deal!

I paid over double for mine... FYI those will work on a shortbed, just remove the right one's....

**special-K** · 11-11-2008, 07:25 AM

I need these for a pair of bedsides I have.I need to know shipping.I bought the same from AZ and shipping wasn`t that bad.My zip is 21771.If Greyhound works for you,it works for me.I could pick up in Frederick,MD.If they aren`t recieving (were,then,weren`t,then were again last I checked) Baltimore will work.

chevy_mike · 11-11-2008, 11:51 AM

I have never done shipping via Greyhound. I did a quick quote on their site and it was looking about $85. I also did a quick quote from FedEx Ground and it looks to be about $75.

Again these are rough ideas since I haven't weighed them all together. I was thinking 80# but that could be wrong. I'll see if I can get a more acturate quote for ya, if you want me to continue.

Thanks,
Mike

Quote:

Originally Posted by special-K

I need these for a pair of bedsides I have.I need to know shipping.I bought the same from AZ and shipping wasn`t that bad.My zip is 21771.If Greyhound works for you,it works for me.I could pick up in Frederick,MD.If they aren`t recieving (were,then,weren`t,then were again last I checked) Baltimore will work.

**special-K** · 11-13-2008, 08:41 AM

Thanks.Not too bad,but I better hold off for other reasons.I`d be interested later if they don`t sell.

chevy_mike · 11-16-2008, 09:44 PM

Bump...

**thelonerife** · 11-16-2008, 10:06 PM

shipping to 37043

rlm316 · 11-17-2008, 12:03 PM

Put me in line. Shipping to 08098. Thanks.

chevy_mike · 11-17-2008, 01:54 PM

Quote:

Originally Posted by rlm316

Put me in line. Shipping to 08098. Thanks.

FedEx ground is showing aprrox. $74. This is based on my rough number of size and weight. I need to bundle this up and get an actual weight/size. It might be a few days before I can do that, if you are stil interested.

chevy_mike · 11-17-2008, 01:54 PM

Quote:

Originally Posted by thelonerife

shipping to 37043

FedEx ground is showing aprrox. $67. This is based on my rough number of size and weight. I need to bundle this up and get an actual weight/size. It might be a few days before I can do that, if you are stil interested.

**thelonerife** · 11-17-2008, 02:18 PM

I am still interested. if you can give me an exact total please. Chuck

rlm316 · 11-18-2008, 09:13 AM

If it gets to me, I'll take them. PM me with payment info. Thanks, Lane

**thelonerife** · 11-18-2008, 09:30 AM

I'm going to pass it to rlm316. I'm thinking of doing a vintage airthing so I need to wait. This is a great deal for someone!

rlm316 · 11-20-2008, 09:31 AM

Send me the total and your payment details. Payment is ready.

chipflyer · 11-20-2008, 02:35 PM

Just an FYI, I got a set just like these from HOTRODHENRYJ in Arizona He shipped them to me in KS wrapped in cardboard and taped up good with shipping tape and he used FEDEX. I can't remember the price but it wasn't bad at all. You might PM him for more info.

Jeff

chevy_mike · 11-21-2008, 12:52 AM

Quote:

Originally Posted by rlm316

Send me the total and your payment details. Payment is ready.

You are definitely first on the list. I have had zero time this week. It has just been crazy at work and not ending when I get home. The damn time change hasn't helped either.

I really hate having people waiting on me so I really appologize for the delay. I am going to do my best to have it wrapped up and ready to go by Sunday night, so I can ship them Monday after I get off work. Hang in there.

rlm316 · 11-21-2008, 09:25 AM

Thats OK. I'm not in a rush. I won't be online until mon morning anyway. Thanks, Lane

chevy_mike · 11-23-2008, 03:35 PM

Quote:

Originally Posted by rlm316

Thats OK. I'm not in a rush. I won't be online until mon morning anyway. Thanks, Lane

Sent you a PM with shipping info. If still interested, PM me your address and send funds via PayPal.

Thanks.

chevy_mike · 11-22-2008, 09:34 PM

Pending Sale...

chevy_mike · 11-25-2008, 06:34 PM

These have been sold. Thanks!

11-10-2008, 12:04 PM	#1
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Cross Sills for Long Bed, Fleetside, Good Condition in San Diego, CA I have finally taken my wood floor bed apart. I am replace the wood floor with a steel one and have no need for the cross sills. All are in good shape with just minor surface rust as seen in the pictures. Would clean up very nicely. Would perfer local pick up in San Diego, CA. They are kind of heavy when all together and I am not sure how I would even package them for shipping. Buyer would pay shipping and packaging costs. I think these would also work for a short bed, fleetside by not using all of the cross sills but buyer would need to verify this info. Price SOLD. Thanks for looking. __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often... Last edited by chevy_mike; 11-25-2008 at 06:34 PM.

11-10-2008, 01:24 PM	#2
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Cross Sills for Long Bed, Fleetside, Good Condition in San Diego, CA wow, dirt cheap pricing... ttt for you and a good deal! I paid over double for mine... FYI those will work on a shortbed, just remove the right one's.... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

11-11-2008, 07:25 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Cross Sills for Long Bed, Fleetside, Good Condition in San Diego, CA I need these for a pair of bedsides I have.I need to know shipping.I bought the same from AZ and shipping wasn`t that bad.My zip is 21771.If Greyhound works for you,it works for me.I could pick up in Frederick,MD.If they aren`t recieving (were,then,weren`t,then were again last I checked) Baltimore will work. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 11-11-2008 at 07:26 AM.

11-13-2008, 08:41 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Cross Sills for Long Bed, Fleetside, Good Condition in San Diego, CA Thanks.Not too bad,but I better hold off for other reasons.I`d be interested later if they don`t sell. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-16-2008, 09:44 PM	#6
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: Cross Sills for Long Bed, Fleetside, Good Condition in San Diego, CA Bump... __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

11-16-2008, 10:06 PM	#7
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Cross Sills for Long Bed, Fleetside, Good Condition in San Diego, CA shipping to 37043 __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

11-17-2008, 12:03 PM	#8
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: Cross Sills for Long Bed, Fleetside, Good Condition in San Diego, CA Put me in line. Shipping to 08098. Thanks.

11-17-2008, 02:18 PM	#11
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Cross Sills for Long Bed, Fleetside, Good Condition in San Diego, CA I am still interested. if you can give me an exact total please. Chuck __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

11-18-2008, 09:13 AM	#12
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: Cross Sills for Long Bed, Fleetside, Good Condition in San Diego, CA If it gets to me, I'll take them. PM me with payment info. Thanks, Lane

11-18-2008, 09:30 AM	#13
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Cross Sills for Long Bed, Fleetside, Good Condition in San Diego, CA I'm going to pass it to rlm316. I'm thinking of doing a vintage airthing so I need to wait. This is a great deal for someone! __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

11-20-2008, 09:31 AM	#14
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: Cross Sills for Long Bed, Fleetside, Good Condition in San Diego, CA Send me the total and your payment details. Payment is ready.

11-20-2008, 02:35 PM	#15
chipflyer Registered User Join Date: May 2004 Location: Topeka, Ks Posts: 2,293	Re: Cross Sills for Long Bed, Fleetside, Good Condition in San Diego, CA Just an FYI, I got a set just like these from HOTRODHENRYJ in Arizona He shipped them to me in KS wrapped in cardboard and taped up good with shipping tape and he used FEDEX. I can't remember the price but it wasn't bad at all. You might PM him for more info. Jeff __________________ I'm not a pessimist, I'm just optimistic that bad things are going to happen. 1971 Cheyenne Super K10 - tilt, cruise, air, am/fm, tow hooks, factory buckets! 1986 Jeep J10 pickup, - 5.3L Vortec with 4L60e and NP241.

11-21-2008, 09:25 AM	#17
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: Cross Sills for Long Bed, Fleetside, Good Condition in San Diego, CA Thats OK. I'm not in a rush. I won't be online until mon morning anyway. Thanks, Lane

11-22-2008, 09:34 PM	#19
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: Cross Sills for Long Bed, Fleetside, Good Condition in San Diego, CA Pending Sale... __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

11-25-2008, 06:34 PM	#20
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: Cross Sills for Long Bed, Fleetside, Good Condition in San Diego, CA These have been sold. Thanks! __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.