Intake bolts leaking on my Performer RPM - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70c10 · 11-30-2002, 12:44 PM

Recently I noticed these bolts leaking and used the white liquid thread sealer but it started leaking again. Do you apply and install or "wait" and install?. Is there something else better?. Thanks

mikep · 11-30-2002, 12:56 PM

Permatex #2 on the threads or just good old stop leak in the coolant does wonders and save a lot of agravation sometimes.

Reumster · 11-30-2002, 01:54 PM

Yep they allways leak. I've tried Ultra Gray(best made) and pipe dope, and both nothing seems to work for that long. Allways oil coming threw the intake bolts.

70c10 · 11-30-2002, 03:34 PM

I just bought some Permatex a few minutes ago in the the little white plastic can. It has the brush attached to the inside of the lid and it's black. The guy at the parts store said it works great. Now it just started to rain!

**Desert Rat** · 11-30-2002, 06:09 PM

I use Permatex liquid the Red in the small brush on can,he one thats reall sticky and you get it all over your fingers,and it cured my leak,also had good luck with black permatex silicone type in tube Hi Temp,pu t a good coat all the way down one side of bolt then a dab under bolt head should seal it up.suppose you could make little intake bolt gaskets-LOL.make sure the bolts and thread are good and clean befor applying anything maybe spray with carb cleaner or brake clean just dont get in eye it burns!

mikep · 11-30-2002, 06:47 PM

Often when doing pneumatic or hydraulic servicing I'll use a washer with a special captive rubber O ring inside the outer steel shell. Theyre kind of spendy but if your just buying 12 for manifold bolts it might be money well spent. Check on the Mcmaster-Carr website for sealing washers.

70c10 · 11-30-2002, 07:27 PM

Thanks guys.

guitarman · 11-30-2002, 07:59 PM

Try carb cleaner in the hole before you use the sealant and it will stop. If you already have sealant on them and they leak you'll have to chase the threads with a tap shoot carb cleaner and then re-seal.

jddowell · 11-30-2002, 10:24 PM

I had the same problem. I solved it with "Red" silicon applied to each bolt that leaked. That solved the problem for me. The "Red" Silicon is high temp and had stopped a lot of leak problems for me.

11-30-2002, 12:44 PM	#1
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Intake bolts leaking on my Performer RPM Recently I noticed these bolts leaking and used the white liquid thread sealer but it started leaking again. Do you apply and install or "wait" and install?. Is there something else better?. Thanks __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

11-30-2002, 01:54 PM	#3
Reumster L.E.D. Freak Join Date: Jan 2002 Location: Polson MT Posts: 1,358	Yep they allways leak. I've tried Ultra Gray(best made) and pipe dope, and both nothing seems to work for that long. Allways oil coming threw the intake bolts. __________________ Specializing in Custom L.E.D. inserts. http://www.ccled.com/ Contact me @ blazer2wd1972@hotmail.com (406)675-8082 or Joel @ jmcwaters@eps-corp.net 1972 2wd Blazer, 350/700R4/3:73 posi, err & Custom L.E.D. inserts! LOL

11-30-2002, 03:34 PM	#4
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	I just bought some Permatex a few minutes ago in the the little white plastic can. It has the brush attached to the inside of the lid and it's black. The guy at the parts store said it works great. Now it just started to rain! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

11-30-2002, 06:47 PM	#6
mikep Used to have a truck Join Date: May 2002 Location: port orchard WA Posts: 1,552	Often when doing pneumatic or hydraulic servicing I'll use a washer with a special captive rubber O ring inside the outer steel shell. Theyre kind of spendy but if your just buying 12 for manifold bolts it might be money well spent. Check on the Mcmaster-Carr website for sealing washers. __________________ No truck :-(

11-30-2002, 07:27 PM	#7
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Thanks guys. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

11-30-2002, 12:56 PM	#2
mikep Used to have a truck Join Date: May 2002 Location: port orchard WA Posts: 1,552	Permatex #2 on the threads or just good old stop leak in the coolant does wonders and save a lot of agravation sometimes. __________________ No truck :-(

11-30-2002, 06:09 PM	#5
Desert Rat Senior Member Join Date: Dec 1999 Location: Darrington, Washington Posts: 3,963	I use Permatex liquid the Red in the small brush on can,he one thats reall sticky and you get it all over your fingers,and it cured my leak,also had good luck with black permatex silicone type in tube Hi Temp,pu t a good coat all the way down one side of bolt then a dab under bolt head should seal it up.suppose you could make little intake bolt gaskets-LOL.make sure the bolts and thread are good and clean befor applying anything maybe spray with carb cleaner or brake clean just dont get in eye it burns!

11-30-2002, 07:59 PM	#8
guitarman Do it well or don't do it Join Date: Apr 2002 Location: Georgia Posts: 457	Try carb cleaner in the hole before you use the sealant and it will stop. If you already have sealant on them and they leak you'll have to chase the threads with a tap shoot carb cleaner and then re-seal. __________________ Try to be the person your dog thinks you are. Excellent paint and body site: http://www.autobody101.com/ Visit my Web Site http://home.attbi.com/~agfosteriii

11-30-2002, 10:24 PM	#9
jddowell Registered User Join Date: Aug 2002 Location: Cushing, Oklahoma Posts: 20	I had the same problem. I solved it with "Red" silicon applied to each bolt that leaked. That solved the problem for me. The "Red" Silicon is high temp and had stopped a lot of leak problems for me.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.