whats the measurements from the back of the cab to the end of the frame..

[oldblue1968chevy]

and which measurement is swb or lwb found a 69 4x4 c10 1000 bucks for it on wheels tires with motor and tranny..not sure what its worth will have morepics and info later when i find it out..hes gonna measure from backof cabto end of frame rails...then ima ask yall andhope somebody will know...thankss andsorry

[oldblue1968chevy]

"There may be a little more rust on the body than I remember. Mainly the back of the cab, passenger rocker, and a spot on front of the passenger fender. I have attached some pics. Um, measurement from the back of the cab to the rear axle is 53" and from the back of the cab to the end of the frame is 95". And the mileage is 86,708.1"

heres some pictures....right now the funds wont let me get it..but if somebody is interetsted pm me i'll get u the info on it..heres the pics..

[IMG]

http://[IMG]http://i289.photobuc...oy/truck69.jpg
[/IMG][/IMG]

[oldblue1968chevy]

[oldblue1968chevy]

ok, what do yall think..is it worth a 230 mile round trip for (well it might be driveable dont remeber)..he wants 1000 but would proly take less...whatchall think thanks!

[Longhorn Man]

personally, I don't know the measurement you are asking for....
however;
1. you can measure the wheelbase, that's a sure fire way to tell if it is a long wheelbase (127 inches) or a short wheel base (115 inches) ... measure hub center to hub center, but even if you are off by a bit, you should be able to tell
2. Look at the SPID (if it is there) and look where it says wheelbase... or, the model number will tell you (also on the SPID)
3. from just looking at the photos... my money is on it being a LWB.