53 Bed to Frame mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

solidaxel · 12-24-2008, 12:24 AM

After setting up the bed for my 53 and placing it back on the chassis I noticed that the frame was shorter to the rear of the bed mounts.
I was under the imperssion that all 47 to 53 frames for the short bed were the same. I started this as a "new" to me chassis for a 47 to 53 but after installing the bed it seems to be 1 to 2" shorter.

mylow53 · 12-24-2008, 02:20 PM

mine isn't that much better i don't know why but the frame rails don't extend much past where there attached to the bed. your bed dosen't look like a long bed either so long as you can bolt the bed down you should be fine... unless your planning on big heavy loads
GT

*1sik52* · 12-24-2008, 03:09 PM

Mine was right on. You or someone didnt happen to shorten the frame a little huh?

solidaxel · 12-24-2008, 05:38 PM

The frame was a roller when I got it and all I did was check it from corner to corner and it was within a 1/8" so I bought it.
I will extend it a few inches and mount the bed where the front mounts fall and make new rear ones.
Thanks for helping solve the mystery!!

12-24-2008, 12:24 AM	#1
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	53 Bed to Frame mounts After setting up the bed for my 53 and placing it back on the chassis I noticed that the frame was shorter to the rear of the bed mounts. I was under the imperssion that all 47 to 53 frames for the short bed were the same. I started this as a "new" to me chassis for a 47 to 53 but after installing the bed it seems to be 1 to 2" shorter. Attached Images __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

12-24-2008, 02:20 PM	#2
mylow53 Registered User Join Date: Sep 2006 Location: thousand oaks, California Posts: 732	Re: 53 Bed to Frame mounts mine isn't that much better i don't know why but the frame rails don't extend much past where there attached to the bed. your bed dosen't look like a long bed either so long as you can bolt the bed down you should be fine... unless your planning on big heavy loads GT __________________ Greg 1953 chevy 1/2 ton 5 window, chevy 350 330 horse 700r tranz, lowering spindels mustang 2 frount. ford 9", airbags on 4 corners . purchased in 1983 for $325 while in high school http://67-72chevytrucks.com/vboard/s...=215079&page=5

12-24-2008, 03:09 PM	#3
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: 53 Bed to Frame mounts Mine was right on. You or someone didnt happen to shorten the frame a little huh?

12-24-2008, 05:38 PM	#4
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: 53 Bed to Frame mounts The frame was a roller when I got it and all I did was check it from corner to corner and it was within a 1/8" so I bought it. I will extend it a few inches and mount the bed where the front mounts fall and make new rear ones. Thanks for helping solve the mystery!! __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.