headliner trim template-FREE - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**jerry moss** · 01-04-2009, 12:14 PM

several years ago i junked a 72 cheyenne cab and i cut out the inner skin of the cab about 3 inches larger than the headliner so i would have a template for the trim holes. i never used it but would like to give it to someone local if they can use it. it would cost way too much to ship so it's local pick up only. it's destined for the scrap bin if no-one is interested.
FREE FREE FREE FREE FREE.

**72 Super** · 01-04-2009, 12:16 PM

Dang Jerry I could use it

That will be great for someone close

Brad · 01-04-2009, 02:15 PM

I could use this and will be down for the Nor-Cal meet on the 17th. Any chance you're going to that or are you close enough for me to swing by???

Jerry Jones · 01-04-2009, 02:47 PM

Quote:

Originally Posted by Brad

I could use this and will be down for the Nor-Cal meet on the 17th. Any chance you're going to that or are you close enough for me to swing by???

FYI, he is about 85 miles South East of where the meet is.

**tll74** · 01-07-2009, 03:24 AM

Quote:

Originally Posted by Brad

I could use this and will be down for the Nor-Cal meet on the 17th. Any chance you're going to that or are you close enough for me to swing by???

Where is the Nor-Cal meet held at? Is there a link available to learn more about it? Thanks

petey-pablo · 01-07-2009, 07:38 AM

Can this template be Duplicated on Card Board would this be hard to do or not recommended? Or it would be nice if it some how made it my way... I live in fremont and have a buddy that lives in Brentwood Near Kragen auto parts by belfour..Thanks Guys Pablo

70LonghornCST · 01-09-2009, 10:50 AM

As far as the swapmeet goes, I will be mostly shopping around, but I often hang out with either my brother-in-law at his space, or a friend a few spots down. They are located along the north-eastern fence...I forget the name of the road that runs along the fence.

The template may be duplicated, as that is my goal. I will try and post the info if successful. If not, I'll see when we can meet up somewhere and pass off the template to you, and then to whoever is wanting it next.

**jerry moss** · 01-11-2009, 12:18 PM

Richard,
it's 8:30 on sunday morning and i put the template piece in my trailer for you. we have to run some errands this morning so i'll be in and out and not sure i'll be here when you show up. feel free to grab it.

Wilson_ · 01-12-2009, 04:32 AM

Quote:

Originally Posted by tll74

Where is the Nor-Cal meet held at? Is there a link available to learn more about it? Thanks

Link is in my sig!

70LonghornCST · 01-04-2009, 03:13 PM

Which Brentwood? The LA area Brentwood, or the one near Disvovery Bay? I'm near the Disovery Bay (Contra Costa County) Brentwood.
Put me in line...very interested.

**jerry moss** · 01-04-2009, 09:28 PM

i'm in the one by disco bay. i doubt i'll make it to the meet, at least thats how it looks right now.

70LonghornCST · 01-04-2009, 11:53 PM

If it makes it to me, I'll come and get it. I'll use it and give it to the next guy.

**jerry moss** · 01-05-2009, 10:19 AM

70 LonghornCST-since i'm not going to make it to the meet,it's yours. when you're finished with it maybe you can get it to Brad so he can use it.

**jerry moss** · 01-06-2009, 10:25 AM

Richard,
I sent you a P.M. and i'll post a pic of my old beater truck and trailer just in case i'm not home when you get here. i'll put the template in the trailer if i have to leave.

70LonghornCST · 01-06-2009, 11:00 PM

Thanks, Jerry. I got your address and phone number. I'll be down before noon on Sunday. Between 9 and 12 if that's ok. I'll give you a buzz when I'm nearby. If you don't answer, I'll just swing by and get it from the trailor. Thank you SOOO much for the generosity. I'll use it and offer it back up here.

I'll be at the swap meet in Turlock, California http://www.turlockswapmeet.com/ this month. If you're coming down this way Brad, I'll be there. If not, I'll offer it to whoever else needs it.

sleepertruck72 · 01-07-2009, 12:01 AM

70longorncst,
dont mean to hijack, but where will you be at the swap meet ? I will be there
I'll have to stop by to say hello. The Turlock swap meet has been smaller and smaller as far as vendors lately... but still lots of good stuff there.

70LonghornCST · 01-11-2009, 05:49 PM

Jerry,
Thank you VERY MUCH for passing this template on to me. I left a couple of trim pieces in your trailer that were in very good shape as a gesture of thanks. Maybe you can use them. If not give them to someone who can. I did not want to ship them and couldn't bring myself to throw them away.

I will use the template soon and try to make a template on paper. If successful, I'll post it online for all of those across the states and beyond. As far as the actual metal template, I'll post it for Brad 1st, then whoever is next in line who wants to pick it up.

Thanks again, Jerry!

Thanks again,

**jerry moss** · 01-11-2009, 10:20 PM

Richard,
glad you can use the template and hopefully other members can use it after you finish with it. i'll check out the pieces you left as soon as possible--after our weekly shopping expedition today i had to repair my toilet. four trips to ACE finally got it up and running again. if i can't use the trim i'll give it to someone who can. a big THANK YOU.
there is a gentleman close to you that has a BUNCH of 67-72s. he's out in waterford. he has somewhere close to 30 or more of our trucks and lots of rare option goodies-a factory 8-track kit, umpteen sets of tow hooks, tilts,tachs,speedwarnings, am/fm's, buddybuckets and regular buckets, etc. he doesn't sell anything and buys everything he can find. he's got more short 4x4's than anyone i know.
along with a few blazers and 2wds thrown in for good measure.

Brad · 01-12-2009, 12:16 AM

Quote:

Originally Posted by 70LonghornCST

I'll post it for Brad 1st, then whoever is next in line who wants to pick it up.

So will you be able to make to the meet with this? Any chance of me getting it or not?

70LonghornCST · 01-12-2009, 02:02 AM

Quote:

Originally Posted by Brad

So will you be able to make to the meet with this? Any chance of me getting it or not?

Hi Brad! I am going to the swap meet for sure. The swap meet I am going to is on January 23rd & 24th in Turlock, CA. Is this the one you are calling the Northern Ca swap meet? If so, I have already used the template and am ready to pass it off to you. I live in Hughson CA, which is between Sacramento and Fresno...or, 15 minutes from Turlock, which is where the swapmeet I will be going to. I can take it there on Saturday the 23rd if you are going. Let me know.
Richard

70LonghornCST · 01-13-2009, 10:44 PM

Wow, that swap meet is quite a way from me. Is anyone near Hughson or Turlock area going to the Northern CA swapmeet on Saturday who can pick this up for Brad?
Please let me know.

Brad · 01-14-2009, 11:58 AM

70LonghornCST, just so we're all on the same page, I'm referring to the Nor Cal board gathering on the 17th as Wilson pointed out, not any swap meet.

01-04-2009, 12:14 PM	#1
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	headliner trim template-FREE several years ago i junked a 72 cheyenne cab and i cut out the inner skin of the cab about 3 inches larger than the headliner so i would have a template for the trim holes. i never used it but would like to give it to someone local if they can use it. it would cost way too much to ship so it's local pick up only. it's destined for the scrap bin if no-one is interested. FREE FREE FREE FREE FREE. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

01-04-2009, 12:16 PM	#2
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,685	Re: headliner trim template-FREE Dang Jerry I could use it That will be great for someone close __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

01-04-2009, 02:15 PM	#3
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,672	Re: headliner trim template-FREE I could use this and will be down for the Nor-Cal meet on the 17th. Any chance you're going to that or are you close enough for me to swing by??? __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

01-07-2009, 07:38 AM	#6
petey-pablo "THE GREEN GOBLIN" Join Date: Mar 2008 Location: Fremont Ca. Posts: 1,025	Re: headliner trim template-FREE Can this template be Duplicated on Card Board would this be hard to do or not recommended? Or it would be nice if it some how made it my way... I live in fremont and have a buddy that lives in Brentwood Near Kragen auto parts by belfour..Thanks Guys Pablo __________________ Petey-pablo "THE GREEN GOBLIN" 1972 Cheyenne 10 Short Fleet Side Front 2.5inch Spindles with 2inch Springs Rear 4inch drop Springs. 454BBC TH400,Posi 1971 Cheyenne 10 Long Fleet Side 454BBC TH350,Posi Sold Drive it like you stole it! Petey-pablo@sbcglobal.net

01-09-2009, 10:50 AM	#7
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: headliner trim template-FREE As far as the swapmeet goes, I will be mostly shopping around, but I often hang out with either my brother-in-law at his space, or a friend a few spots down. They are located along the north-eastern fence...I forget the name of the road that runs along the fence. The template may be duplicated, as that is my goal. I will try and post the info if successful. If not, I'll see when we can meet up somewhere and pass off the template to you, and then to whoever is wanting it next. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

01-11-2009, 12:18 PM	#8
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	Re: headliner trim template-FREE Richard, it's 8:30 on sunday morning and i put the template piece in my trailer for you. we have to run some errands this morning so i'll be in and out and not sure i'll be here when you show up. feel free to grab it. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

01-04-2009, 03:13 PM	#10
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: headliner trim template-FREE Which Brentwood? The LA area Brentwood, or the one near Disvovery Bay? I'm near the Disovery Bay (Contra Costa County) Brentwood. Put me in line...very interested. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal Last edited by 70LonghornCST; 01-04-2009 at 03:14 PM.

01-04-2009, 09:28 PM	#11
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	Re: headliner trim template-FREE i'm in the one by disco bay. i doubt i'll make it to the meet, at least thats how it looks right now. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

01-04-2009, 11:53 PM	#12
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: headliner trim template-FREE If it makes it to me, I'll come and get it. I'll use it and give it to the next guy. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

01-05-2009, 10:19 AM	#13
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	Re: headliner trim template-FREE 70 LonghornCST-since i'm not going to make it to the meet,it's yours. when you're finished with it maybe you can get it to Brad so he can use it. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

01-06-2009, 10:25 AM	#14
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	Re: headliner trim template-FREE Richard, I sent you a P.M. and i'll post a pic of my old beater truck and trailer just in case i'm not home when you get here. i'll put the template in the trailer if i have to leave. Attached Images __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

01-06-2009, 11:00 PM	#15
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: headliner trim template-FREE Thanks, Jerry. I got your address and phone number. I'll be down before noon on Sunday. Between 9 and 12 if that's ok. I'll give you a buzz when I'm nearby. If you don't answer, I'll just swing by and get it from the trailor. Thank you SOOO much for the generosity. I'll use it and offer it back up here. I'll be at the swap meet in Turlock, California http://www.turlockswapmeet.com/ this month. If you're coming down this way Brad, I'll be there. If not, I'll offer it to whoever else needs it. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

01-07-2009, 12:01 AM	#16
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: headliner trim template-FREE 70longorncst, dont mean to hijack, but where will you be at the swap meet ? I will be there I'll have to stop by to say hello. The Turlock swap meet has been smaller and smaller as far as vendors lately... but still lots of good stuff there. __________________ 72 C20 Longbed 05 1500 Z71

01-11-2009, 05:49 PM	#17
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: headliner trim template-FREE Jerry, Thank you VERY MUCH for passing this template on to me. I left a couple of trim pieces in your trailer that were in very good shape as a gesture of thanks. Maybe you can use them. If not give them to someone who can. I did not want to ship them and couldn't bring myself to throw them away. I will use the template soon and try to make a template on paper. If successful, I'll post it online for all of those across the states and beyond. As far as the actual metal template, I'll post it for Brad 1st, then whoever is next in line who wants to pick it up. Thanks again, Jerry! Thanks again, __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal Last edited by 70LonghornCST; 01-11-2009 at 05:50 PM. Reason: Forgot info

01-11-2009, 10:20 PM	#18
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	Re: headliner trim template-FREE Richard, glad you can use the template and hopefully other members can use it after you finish with it. i'll check out the pieces you left as soon as possible--after our weekly shopping expedition today i had to repair my toilet. four trips to ACE finally got it up and running again. if i can't use the trim i'll give it to someone who can. a big THANK YOU. there is a gentleman close to you that has a BUNCH of 67-72s. he's out in waterford. he has somewhere close to 30 or more of our trucks and lots of rare option goodies-a factory 8-track kit, umpteen sets of tow hooks, tilts,tachs,speedwarnings, am/fm's, buddybuckets and regular buckets, etc. he doesn't sell anything and buys everything he can find. he's got more short 4x4's than anyone i know. along with a few blazers and 2wds thrown in for good measure. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA



Register or Log In To remove these advertisements.

01-13-2009, 10:44 PM	#21
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: headliner trim template-FREE Wow, that swap meet is quite a way from me. Is anyone near Hughson or Turlock area going to the Northern CA swapmeet on Saturday who can pick this up for Brad? Please let me know. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

01-14-2009, 11:58 AM	#22
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,672	Re: headliner trim template-FREE 70LonghornCST, just so we're all on the same page, I'm referring to the Nor Cal board gathering on the 17th as Wilson pointed out, not any swap meet. __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.