3/4 ton lift spindles?

[leddzepp]

Does anyone know if there are Lift spindles available for 3/4 ton 2wd (C-20) trucks? I have found drop spindles, but it is going to be $$ to lower the truck, which requires a lot more work and parts. So, I figured if I lift the front end of the truck, it will be even with the rear end, and I can keep the 33" tires on it, and go with a lifted truck as opposed to a lowered one. No need to change the 8 lugs or any of that mess. I checked Fabtech, and it looks like they do not make them....any one know of a manufacturer?? Thanks.

[pooz911]

Noboby makes a lifted spindle for our year truck.

I have seen threads where someone used the 88 + 1/2 ton lifted spindle and ball joints.


I don't know if you can use a 1992 and up 3/4 lifted spindle w/ ball joints and mate them w/ our a arms.

What width rim are you using w/ your 33 inch tires? Do you have a big block or small block?

[thirdstreettito]

Grunion at Grunion fabrication could probably set you up with a sweet 2wd lift kit. He does awesome work!

[ap2002]

not trying to steal your thread, but i know you are talking about a c20, does some one know if they make a lift spindle for a c10?

[pooz911]

http://67-72chevytrucks.com/vboard/s...=304940&page=2


try this link....2nd page