Help With Nitrous Kits for EFI/TBI 305 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

colt45-2007 · 01-13-2009, 09:30 PM

--------------------------------------------------------------------------------

Ok I have an 88 C1500 with a fairly new crate 305, it has 32,000 miles on it as of now, its pretty much stock, It has a K&N cold air intake kit, new exhaust from the manifolds back and sum other little stuff but nothing major. I am seriously thinking of buying a nitrous kit for it and am wondering what kit would work best or if I should even buy one at all..... A couple of kits I'm looking at are as followed:

ZEX Truck EFI Wet Nitrous Oxide System 82047 Kit with 55-125hp jets and activates using throttle position sensor.....(highest rated kit)

NOS 8 Cylinder Sniper WET EFI Nitrous 07006 Kit with 75-125hp jets and activates using micro switch near throttle linkage....(cheapest kit)

JEGS Barry Grant Adjustable TBI Nitrous Kit 87-95 with 50-125hp jets......

NOS 88-95 Nitrous Kit, Wet Shot Plate System For TBI Trucks 100-150 HP Adjustable - 4.3/5.0/5.7L......(most expensive kit)

All kits state they are for stock or slightly modified engines and require 92+ grade gasoline and a fuel pump meeting NEW specs..... I already run premium gas and have already replaced the fuel pump with a new one so I feel as though I could run any of these kits without any problems...... Please give me your opinions and feedback on the subject, Thanks

djracer · 01-15-2009, 08:31 AM

I'd run the bg kit that is from 50-125hp. I think that is plenty of spray for a stock motor.

drag_72 · 01-15-2009, 10:56 AM

especially a 305!! lol

colt45-2007 · 01-15-2009, 05:07 PM

Hey now don't hate on the 305, that's a poor mans V8 lol....... but yea I was thinking either the barry grant kit or the zex kit personally

djracer · 01-15-2009, 11:39 PM

I have been told the zex stuff is junk. A guy that works at the local speed shop said a zex bottle with his nos stuff slowed him down a tenth!

colt45-2007 · 01-16-2009, 12:16 AM

Really? Jeez well thats no good... I did a lot of research today and found that a lot of people with kits on 88-95 trucks had the barry grant kit and a few with the nos sniper kit

drag_72 · 01-16-2009, 03:18 PM

hey man im just messin with ya.. get what ya can get! lol anything to have lots of fun right?

colt45-2007 · 01-16-2009, 05:02 PM

Haha I know man, I agree 100% with that lol

scatesracing · 01-17-2009, 01:47 PM

I have always been a nitrous express guy... Their support is great.. I have put two kits on differant trucks like yours and the guys lovedd them... I recomend no matter what kit you choose. Make sure you run a fuel pressure switch. Dont let it lean out or it will be game over If you add a rpm switch it is almost idiot proof........ almost..........

djracer · 01-18-2009, 05:52 PM

I met the guy who own NX when he was here for drag week. He was driving his duramax powered mustang and he was super cool.

01-13-2009, 09:30 PM	#1
colt45-2007 Don'tHateThe88 Join Date: Jan 2009 Location: Glennville, GA Posts: 92	Help With Nitrous Kits for EFI/TBI 305 -------------------------------------------------------------------------------- Ok I have an 88 C1500 with a fairly new crate 305, it has 32,000 miles on it as of now, its pretty much stock, It has a K&N cold air intake kit, new exhaust from the manifolds back and sum other little stuff but nothing major. I am seriously thinking of buying a nitrous kit for it and am wondering what kit would work best or if I should even buy one at all..... A couple of kits I'm looking at are as followed: ZEX Truck EFI Wet Nitrous Oxide System 82047 Kit with 55-125hp jets and activates using throttle position sensor.....(highest rated kit) NOS 8 Cylinder Sniper WET EFI Nitrous 07006 Kit with 75-125hp jets and activates using micro switch near throttle linkage....(cheapest kit) JEGS Barry Grant Adjustable TBI Nitrous Kit 87-95 with 50-125hp jets...... NOS 88-95 Nitrous Kit, Wet Shot Plate System For TBI Trucks 100-150 HP Adjustable - 4.3/5.0/5.7L......(most expensive kit) All kits state they are for stock or slightly modified engines and require 92+ grade gasoline and a fuel pump meeting NEW specs..... I already run premium gas and have already replaced the fuel pump with a new one so I feel as though I could run any of these kits without any problems...... Please give me your opinions and feedback on the subject, Thanks __________________ '88 C1500 Stepside 350/700r4 & 3/7 drop Last edited by colt45-2007; 01-16-2009 at 12:17 AM.

01-15-2009, 08:31 AM	#2
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Help With Nitrous Kits for EFI/TBI 305 I'd run the bg kit that is from 50-125hp. I think that is plenty of spray for a stock motor. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! Last edited by djracer; 01-15-2009 at 08:32 AM.

01-15-2009, 10:56 AM	#3
drag_72 Ready to go fast!! Join Date: Aug 2008 Location: Carthage,Mo Posts: 219	Re: Help With Nitrous Kits for EFI/TBI 305 especially a 305!! lol __________________ 454 block .30 forged aluminum pistons steel crank valve job Holley Strip Dominator intake 1030cfm holley carb, 250 plate shot roller rockers Erson Solid cam split duration 307/310. .575/.595 lift milodon oil pan fab. aluminum valve covers 4 bolt main splayed anodized caps all studded

01-15-2009, 05:07 PM	#4
colt45-2007 Don'tHateThe88 Join Date: Jan 2009 Location: Glennville, GA Posts: 92	Re: Help With Nitrous Kits for EFI/TBI 305 Hey now don't hate on the 305, that's a poor mans V8 lol....... but yea I was thinking either the barry grant kit or the zex kit personally __________________ '88 C1500 Stepside 350/700r4 & 3/7 drop

01-15-2009, 11:39 PM	#5
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Help With Nitrous Kits for EFI/TBI 305 I have been told the zex stuff is junk. A guy that works at the local speed shop said a zex bottle with his nos stuff slowed him down a tenth! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

01-16-2009, 12:16 AM	#6
colt45-2007 Don'tHateThe88 Join Date: Jan 2009 Location: Glennville, GA Posts: 92	Re: Help With Nitrous Kits for EFI/TBI 305 Really? Jeez well thats no good... I did a lot of research today and found that a lot of people with kits on 88-95 trucks had the barry grant kit and a few with the nos sniper kit __________________ '88 C1500 Stepside 350/700r4 & 3/7 drop

01-16-2009, 03:18 PM	#7
drag_72 Ready to go fast!! Join Date: Aug 2008 Location: Carthage,Mo Posts: 219	Re: Help With Nitrous Kits for EFI/TBI 305 hey man im just messin with ya.. get what ya can get! lol anything to have lots of fun right? __________________ 454 block .30 forged aluminum pistons steel crank valve job Holley Strip Dominator intake 1030cfm holley carb, 250 plate shot roller rockers Erson Solid cam split duration 307/310. .575/.595 lift milodon oil pan fab. aluminum valve covers 4 bolt main splayed anodized caps all studded

01-16-2009, 05:02 PM	#8
colt45-2007 Don'tHateThe88 Join Date: Jan 2009 Location: Glennville, GA Posts: 92	Re: Help With Nitrous Kits for EFI/TBI 305 Haha I know man, I agree 100% with that lol __________________ '88 C1500 Stepside 350/700r4 & 3/7 drop

01-17-2009, 01:47 PM	#9
scatesracing Machinist Join Date: Sep 2007 Location: Derby Kansas Posts: 296	Re: Help With Nitrous Kits for EFI/TBI 305 I have always been a nitrous express guy... Their support is great.. I have put two kits on differant trucks like yours and the guys lovedd them... I recomend no matter what kit you choose. Make sure you run a fuel pressure switch. Dont let it lean out or it will be game over If you add a rpm switch it is almost idiot proof........ almost.......... Last edited by scatesracing; 01-17-2009 at 01:49 PM. Reason: I added the nx smiley

01-18-2009, 05:52 PM	#10
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: Help With Nitrous Kits for EFI/TBI 305 I met the guy who own NX when he was here for drag week. He was driving his duramax powered mustang and he was super cool. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.