how does my wing vent window come out? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jrsmith_2010 · 01-24-2009, 03:13 PM

hey guys, i need to take it out to put in my window and have no clue how. any help?

dammitmitchell · 01-24-2009, 03:29 PM

well take off your door panel (which u allready did )
at the bottom of the vertical peice there will b e abolt..
pull that and there's a screw on top..
the whole assembley will then be free..

orrrr u can take it out the way i do..
with a boot when you lock you keys in and it's stuck shut!

jrsmith_2010 · 01-24-2009, 05:44 PM

i hope i dont have to do that!

thanks dammitmitchell

72freak · 01-24-2009, 05:51 PM

It is a cumberson rough thing to do.....Every one I have ever done fought me!

dammitmitchell · 01-24-2009, 06:45 PM

i dunno what it is but after i swap windows out from stock doors to GM knock offs they NEVER lined up right my windows r always "diffifult" to line up..
soooo if you got good wings now keep the assembleys as long as you can..
and the little lockign levers are replaceable..

jrsmith_2010 · 01-24-2009, 10:07 PM

yea i agree, im stickin with GM windows, i just had to replace the scissor lift for the window

*78 Chevyrado* · 01-24-2009, 10:31 PM

If you have good, nice paint, it's hard. If you have paint that you don't care about, it's easy...

OJOE · 01-25-2009, 06:39 PM

Quote:

Originally Posted by jrsmith_2010

hey guys, i need to take it out to put in my window and have no clue how. any help?

if your talking about installing your door glass you dont need to take out your vent window.

**Captkaos** · 01-26-2009, 04:38 PM

Ditto on what Ojoe said. you just need to move it back to get the vent in. 3 screws on the door frame and one at the bottom of the door on the inside.

jrsmith_2010 · 01-26-2009, 05:37 PM

i got it, and got the window back in, thanks for the help guys!

01-24-2009, 03:13 PM	#1
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	how does my wing vent window come out? hey guys, i need to take it out to put in my window and have no clue how. any help? __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.

01-24-2009, 03:29 PM	#2
dammitmitchell the pollock Join Date: May 2008 Location: abilene, texas Posts: 4,423	Re: how does my wing vent window come out? well take off your door panel (which u allready did ) at the bottom of the vertical peice there will b e abolt.. pull that and there's a screw on top.. the whole assembley will then be free.. orrrr u can take it out the way i do.. with a boot when you lock you keys in and it's stuck shut! __________________ Jack of ALL trades, Master of none.. (but one... procrastination) Army vet 02-08 RIP El Jay! Miss you brother! http://67-72chevytrucks.com/vboard/s...d.php?t=343538 http://67-72chevytrucks.com/vboard/s...d.php?t=386042 Last edited by dammitmitchell; 01-24-2009 at 03:29 PM. Reason: poor typing

01-24-2009, 05:44 PM	#3
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: how does my wing vent window come out? i hope i dont have to do that! thanks dammitmitchell __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.

01-24-2009, 05:51 PM	#4
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: how does my wing vent window come out? It is a cumberson rough thing to do.....Every one I have ever done fought me! __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

01-24-2009, 06:45 PM	#5
dammitmitchell the pollock Join Date: May 2008 Location: abilene, texas Posts: 4,423	Re: how does my wing vent window come out? i dunno what it is but after i swap windows out from stock doors to GM knock offs they NEVER lined up right my windows r always "diffifult" to line up.. soooo if you got good wings now keep the assembleys as long as you can.. and the little lockign levers are replaceable.. __________________ Jack of ALL trades, Master of none.. (but one... procrastination) Army vet 02-08 RIP El Jay! Miss you brother! http://67-72chevytrucks.com/vboard/s...d.php?t=343538 http://67-72chevytrucks.com/vboard/s...d.php?t=386042

01-24-2009, 10:07 PM	#6
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: how does my wing vent window come out? yea i agree, im stickin with GM windows, i just had to replace the scissor lift for the window __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.

01-24-2009, 10:31 PM	#7
78 Chevyrado Account Suspended Join Date: Dec 2007 Location: Unnapreciative, Trollville Posts: 2,079	Re: how does my wing vent window come out? If you have good, nice paint, it's hard. If you have paint that you don't care about, it's easy...

01-26-2009, 04:38 PM	#9
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: how does my wing vent window come out? Ditto on what Ojoe said. you just need to move it back to get the vent in. 3 screws on the door frame and one at the bottom of the door on the inside. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

01-26-2009, 05:37 PM	#10
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: how does my wing vent window come out? i got it, and got the window back in, thanks for the help guys! __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.