Question for you guys running TH700R4? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

flyin99 · 05-13-2002, 04:41 PM

Did you modify your indicator, or does somebody make them for these trucks, that has the P R O D 2 1 type of indicator?

bigvinnie · 05-13-2002, 04:50 PM

didn't modify it, my pointer lands on the D when I'm in 4th, rarely ever shift to the other 3 forward gears...

------------------
'72 short step, 350, 700R4, tilt, ps, pdb, a/c, lowered coils, etc., other work in progress... San Diego, CA
http://www.ixpres.com/vlusardi/chevtrk.htm

Project1970 · 05-13-2002, 04:53 PM

I once saw an indicator for our trucks that had the OD / D / 2 / 1 indicators...I should've bookmarked it...I think I found it on a site in a thread regarding aftermarket gauges in the stock clusters...

------------------
Project 1970 - soon to be seen at http://milhouse.treylis.org:81/

Wasted Income · 05-13-2002, 05:26 PM

I simply do not have an indicator on my truck. The shift detents in the column work just fine with the overdrive. I believe that Dakota Digital has an indicator (L.E.D. or digital) that would work. Pretty pricey if i remember correctly (which is why i am indicatorless)

-Jeff

---------------------------------------------
69 C-10 LWB
67 C-10 SWB
92 K1500 Burban

Blue68 · 05-14-2002, 12:07 PM

Running the stock 3sp column with a Lokar setup. I've been driving long enough to more or less guess where Drive is so its not a problem. Now when my wife gets in the truck (once every couple of years) it's a challenge since you have to pull the shifter towards you like going into reverse or first on the 3 speed column.

It's almost an antitheft device....

------------------
'68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades.

Way too much money and time..But it's a hobby.

Leinie · 05-14-2002, 12:11 PM

I was looking at the column in a chevy van,(with auto od ) and it appeared to me that the indicator from that column might work.
Don't know for sure, but might be worth checking out.

1-PU70 · 05-14-2002, 12:15 PM

I used all the origanal parts from the 350 I took out. When it points to 3rd its in 4th. I can shift it past 1st witch is realy 2nd and use first only.

Mixup · 05-14-2002, 12:20 PM

I just put one on my 69. I got it from Bowtie overdrives. I-DID-IT makes it. I removed the old housing and the old indicator window. I had to grind the new one a little to slide in the housing from the back. It looks great and the light still shines through it.

busterwivell · 05-14-2002, 01:44 PM

Mixup, pictures? PLEASE!

Mixup · 05-14-2002, 04:21 PM

No camara. I'll see if I can borrow one.

05-13-2002, 04:41 PM	#1
flyin99 creator of kong Join Date: Mar 2001 Location: Kentucky Posts: 538	Question for you guys running TH700R4? Did you modify your indicator, or does somebody make them for these trucks, that has the P R O D 2 1 type of indicator?

05-13-2002, 04:50 PM	#2
bigvinnie Registered User Join Date: Aug 2001 Location: escondido, ca 92026 Posts: 1,222	didn't modify it, my pointer lands on the D when I'm in 4th, rarely ever shift to the other 3 forward gears... ------------------ '72 short step, 350, 700R4, tilt, ps, pdb, a/c, lowered coils, etc., other work in progress... San Diego, CA http://www.ixpres.com/vlusardi/chevtrk.htm __________________ '72 short step, 350, 700R4, tilt, ps, pdb, a/c, lowered coils, etc., other work in progress... San Diego, CA 72 Stepside Project

05-13-2002, 04:53 PM	#3
Project1970 14.1 @ 96MPH Join Date: Jul 2001 Location: Mesa, AZ Posts: 2,811	I once saw an indicator for our trucks that had the OD / D / 2 / 1 indicators...I should've bookmarked it...I think I found it on a site in a thread regarding aftermarket gauges in the stock clusters... ------------------ Project 1970 - soon to be seen at http://milhouse.treylis.org:81/ __________________ Project1970 - LS1 Swap Complete!

05-13-2002, 05:26 PM	#4
Wasted Income Boosted Member Join Date: May 2002 Location: Mackinaw, IL Posts: 2,200	I simply do not have an indicator on my truck. The shift detents in the column work just fine with the overdrive. I believe that Dakota Digital has an indicator (L.E.D. or digital) that would work. Pretty pricey if i remember correctly (which is why i am indicatorless) -Jeff --------------------------------------------- 69 C-10 LWB 67 C-10 SWB 92 K1500 Burban __________________ 1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq 1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift 1964 Buick Skylark Twin TURBO 383 LS pro-touring project 2014 VW Passat TDI - Daily Driver Turbo diesel 2015 Sierra Denali HD Duramax Turbo diesel 2023 Ford Explorer ST - Twin Turbskis 2023 Ford F150 RCSB - Whipple Supercharged 2017 Polaris RZR Turbo 2014 Nor-Tech Center Console - Twin Supercharged Outboards *TURBO ALL THE THINGS!!*

05-14-2002, 12:07 PM	#5
Blue68 Registered User Join Date: Apr 2000 Location: Frisco, Tx, USA Posts: 606	Running the stock 3sp column with a Lokar setup. I've been driving long enough to more or less guess where Drive is so its not a problem. Now when my wife gets in the truck (once every couple of years) it's a challenge since you have to pull the shifter towards you like going into reverse or first on the 3 speed column. It's almost an antitheft device.... ------------------ '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades. Way too much money and time..But it's a hobby. __________________ http://home.comcast.net/~r.landrum/w...tos.html-.html '68 C-10 LWB, '98 Z-71 350 w/accessories (Serpentine), Edelbrock Performer, Edelbrock 1405 (600cfm) carb, GM HEI, CompCam Extreme 4x4 roller cam, Thorley Headers, Carter Electric Fuel Pump, Vintage Air, 700r4, 3.73, disc brakes and power steering upgrades.

05-14-2002, 12:11 PM	#6
Leinie Registered User Join Date: Feb 2001 Location: USA Posts: 2,613	I was looking at the column in a chevy van,(with auto od ) and it appeared to me that the indicator from that column might work. Don't know for sure, but might be worth checking out.

05-14-2002, 12:15 PM	#7
1-PU70 Registered User Join Date: Apr 2000 Location: Bradenton, FL Posts: 1,036	I used all the origanal parts from the 350 I took out. When it points to 3rd its in 4th. I can shift it past 1st witch is realy 2nd and use first only. __________________ 1970 CST/10 402,700R4,3:73 posi,AC,PS,PB,TLT,PW,Buckets with heaters

05-14-2002, 12:20 PM	#8
Mixup Registered User Join Date: Jan 2002 Location: Henderson, NV Posts: 358	I just put one on my 69. I got it from Bowtie overdrives. I-DID-IT makes it. I removed the old housing and the old indicator window. I had to grind the new one a little to slide in the housing from the back. It looks great and the light still shines through it. __________________ 1980 Chevy Shortbed Pickup 1969 Z28 engine Turbo 350

05-14-2002, 01:44 PM	#9
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	Mixup, pictures? PLEASE! __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com

05-14-2002, 04:21 PM	#10
Mixup Registered User Join Date: Jan 2002 Location: Henderson, NV Posts: 358	No camara. I'll see if I can borrow one. __________________ 1980 Chevy Shortbed Pickup 1969 Z28 engine Turbo 350

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.