I saw a neat truck today... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67 cst swb** · 02-20-2009, 02:40 AM

A guy pulled up to our Speed Shop today... In a 71/72 3/4ton, 4x4, 454cid (yes, factory 454 emblems) Tach/vacumn dash, tilt wheel, tow hooks, rust free (even under the battery) 60,xxx truck...
I was drooling so much, my boss was looking for a lady in the truck...

I got pictures, but they are crappy cell phone pics...

Bryan

thirdstreettito · 02-20-2009, 02:56 AM

Cant wait for the pics! lol You said factory 454 emblems...

**67 cst swb** · 02-20-2009, 02:59 AM

pics up....
I didn't know they did a factory 454... He was mumbling something about dealer installed option only 454, only motor other that 396/402 BBC ever put in one of our trucks from factory was a 427. and only one, it was for a Nascar guy (don't rember the name) so he says.

Also, I was really wanting to peek at the glove box listing, but didn't want to offend him...
enjoy the pictures....

thirdstreettito · 02-20-2009, 03:06 AM

Those are most likely the aftermarket emblems... Only BB engine in 67-72 that I have EVER seen or heard of were the 396 and 400(402).

**67 cst swb** · 02-20-2009, 03:14 AM

Quote:

Originally Posted by thirdstreettito

Those are most likely the aftermarket emblems... Only BB engine in 67-72 that I have EVER seen or heard of were the 396 and 400(402).

That's exactly what I thought..... He was talking (confidently) that Only BB engine were the 396 and 400(402), But you could get a 454 in one at the dealership and the emblems/motor was a (before sold new) dealer option... Then thats when he grined an said... "did you know only 1 engine other that the 396 & 402 was ever installed in these model trucks? It was a 427 for insert Nascar guys name here Yep, true story... only 1 ever done with something other than the 396's & 402's.... But you could get a 454 as a dealer installed option"..... blah, blah, blah....
I'm not saying he's right or wrong.... just saying it was an interesting conversation....
But, I wish I had that truck... whatever it is.....

Andy4639 · 02-20-2009, 05:21 AM

Back in those day I would bet if you had enough money you could get ay motor you wanted as long as you payed for it.

Skirkpat · 02-20-2009, 11:28 AM

Quote:

Originally Posted by Andy4639

Back in those day I would bet if you had enough money you could get ay motor you wanted as long as you payed for it.

You are right, Money is the only barrier to getting the vehicle with the engine you wanted straight from the dealer, that said, I seriously boubt it was installed at the dealership, and 100 % sure they did not put a 454 emblem on it after they did it.

I like to ask people who have "Super Rare Vehicles" Why no one wanted it? What was wrong with them? Will you have a hard time getting rid of it? Do you regret buying it? ....... They always stammer a minute then look at me like I am a dumb@$$, I love that look..
Because they are only half right.

Tx Firefighter · 02-20-2009, 06:52 AM

You could never get a big block in a 4x4, regardless of the size.

You can buy those 454 emblems from any 67-72 parts vendor.

Longhorn Man · 02-20-2009, 07:09 AM

there's a bunch of stuff that isn't 'right' on that truck.
the guy is talkin out his tail pipe. The 454 isn't original, nor is it dealer installed.... unless it was his crack dealer anyways.

**special-K** · 02-20-2009, 07:19 AM

I like it,but...Is it a rare Harley Davidson model,too?
The 454 prolly came out of the truck the tow hooks came off.He prolly bought the emblems when he bought the dash bezel.That guy must use Ebay for his educater.we all saw that sale with the "original" 427.I know one thing,I don`t care how shiney or snazzy such a rare truck is.But,what self-respecting rare factory optioned Chevy truck owner would run a messed up Ford hubcap?Oy vey....

3quartertime · 02-20-2009, 09:43 AM

I certainly don't have the knowledge to comment on the if's involved here, but it's kinda strange to me that the guy would take the time to install all of the desirable options and not have a cheapo paint job done at least.

Even with non original stuff installed a rust free body is worth enough to protect it with some cheap paint...

monte0185 · 02-20-2009, 10:14 AM

I would say the PO that sold him the truck sold him that line of BULL*** to sell him the truck at the outragous price he paid for it. Not that i know this for sure but most people that have to brag alot really dont know what their talking about. Been my experience anyway.

**too much stuff** · 02-20-2009, 10:24 AM

It is a neat truck, but no big blocks in 4x4s, and no 454s in these trucks. The towhooks are 73 and newer. The vacuum dash is out of a bigger truck. I would bet there is no glove box sticker. Still looks pretty clean however.

**jerry moss** · 02-20-2009, 10:32 AM

my cousin has a 72 chevy 3/4 ton 4x4 that has had a 402 in it since 72. the original owner bought it and installed a big overhead camper on it, took it to the mountains and didn't like the lack of power from the 350 so when he got home and unloaded the camper, he drove it to a local dealership and had a new 402 put in. we pulled the 402 out when my cousin bought it, did some repairs where they clearanced things with a torch and brought it back to original.
by the way, after removing the big block, i had serious doubts that a dealership did the actual swap due to the shoddy workmanship but thats the story the original owner told my cousin.

big_al_71 · 02-20-2009, 11:26 AM

Well I dont know enough as to what is orginal or what it came with but all I can say it looks like is a daily driver and I applaud him for it..
thks for sharing.

msgross · 02-20-2009, 10:21 AM

dang, can't see pics at work... guess I need to get back to work then huh?

**WIDESIDE72** · 02-20-2009, 11:24 AM

"Custom 20" fender emblems, but Cheyenne Super glove box door... Why not just say he built it the way he (or someone) wanted it instead of making yourself look like a jerk?

67ChevyRedneck · 02-20-2009, 11:56 AM

That's a really nice clean straight truck!

If he bought it like that and was told it was factory, and it "appeared" factory (hey, it even has the right emblems and all right?) then most people would believe it to be true. Only nuts like us know it isn't

If someone showed me a 69 Camaro with an oddball engine in it (something GM actually made back then, I'm not dumb enough to fall for "stock 383"), it looked installed correctly and had the correct badges on the car, I would have no friggin' clue if it was factory or not. But I'm sure camaro nuts would be like, oh you idiot, they NEVER came with that engine!

LONGHAIR · 02-21-2009, 12:42 PM

Quote:

Originally Posted by 67ChevyRedneck

If someone showed me a 69 Camaro with an oddball engine in it (something GM actually made back then, I'm not dumb enough to fall for "stock 383")

The funny thing there is that it would actually be hard to find an engine that wasn't optionally available in a '69 Camaro....the early small cubic inch small blocks that had been phased-out and the 454 are the few.
230 I6
250 I6
302 V8
307 V8
327 V8
350 V8 3 different HP levels
396 V8 4 different HP levels
427 V8 2 different versions

3 different automatics
at least 5 different manual transmissions

it just gets out of control from there....there are hundreds of options, some in groups that force out others, many available individually.

The '69 Camaro was one of the most heavily optioned cars to ever come from Detroit.

Stock72c10 · 02-20-2009, 01:09 PM

If you are gonna make up a story, make it good. Install a fancy horn and say it was the original Dukes of Hazzard truck before they decided to go with a Charger

jbristo67 · 02-20-2009, 01:31 PM

I could Get a 502 emblem that looks just as stock as that doesnt mean they came with a 502 Either

**67 cst swb** · 02-21-2009, 01:09 AM

Good thing I didn't advertise this thread as "all original rare factory options" truck, You purists woulda hung me....
notice I said
"I didn't know they did a factory 454... ...I was really wanting to peek at the glove box listing"

Reason I was drooling... I would love to have this truck, not because of it originality (or lack of) but due to, If I built a 4x4, thats what I'd like to have & rust free to boot.

My thoughts.... I believe the truck has been repainted and made to look used, So is it an original rust free? I don't think so (but ???). I couldn't tell you a factory tow hook from a fish hook, but.... I thought ya'll would like to see it for what it is, not for what it's not...

I'd take it...

Oh, and it's got brand new aluminum upper & lower pulleys on it... and he paid cash... hehehe

*Shane* · 02-21-2009, 01:55 AM

by the looks of the filthy interior, i don't think that's fake patina on the exterior.

Andy4639 · 02-21-2009, 07:22 AM

Who is to say the guy didn't have a dealer install that 454. Who! I agree it wouldn't be a option for the masses but if some one wanted it bad enough any good dealer would have jumped on installing it for them. I don't think his story is all truthfull but who is to say. Just because some book says so doesn't mean it's not true. My dad had some stuff installed by dealers back in the 70"s that wasn't in no book.

tphsmith · 02-21-2009, 07:47 AM

sheesh, sometimes a few just get down right mean pickin!! I say "Hey thanks for the story and pic's"
Good DAY

02-20-2009, 02:40 AM	#1
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	I saw a neat truck today... A guy pulled up to our Speed Shop today... In a 71/72 3/4ton, 4x4, 454cid (yes, factory 454 emblems) Tach/vacumn dash, tilt wheel, tow hooks, rust free (even under the battery) 60,xxx truck... I was drooling so much, my boss was looking for a lady in the truck... I got pictures, but they are crappy cell phone pics... Bryan __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White Last edited by 67 cst swb; 02-20-2009 at 02:58 AM.

02-20-2009, 02:56 AM	#2
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: I saw a neat truck today... Cant wait for the pics! lol You said factory 454 emblems... __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck Last edited by thirdstreettito; 02-20-2009 at 02:57 AM.

02-20-2009, 02:59 AM	#3
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: I saw a neat truck today... pics up.... I didn't know they did a factory 454... He was mumbling something about dealer installed option only 454, only motor other that 396/402 BBC ever put in one of our trucks from factory was a 427. and only one, it was for a Nascar guy (don't rember the name) so he says. Also, I was really wanting to peek at the glove box listing, but didn't want to offend him... enjoy the pictures.... __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White Last edited by 67 cst swb; 02-20-2009 at 03:03 AM.

02-20-2009, 03:06 AM	#4
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: I saw a neat truck today... Those are most likely the aftermarket emblems... Only BB engine in 67-72 that I have EVER seen or heard of were the 396 and 400(402). __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

02-20-2009, 05:21 AM	#6
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: I saw a neat truck today... Back in those day I would bet if you had enough money you could get ay motor you wanted as long as you payed for it. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-20-2009, 06:52 AM	#8
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: I saw a neat truck today... You could never get a big block in a 4x4, regardless of the size. You can buy those 454 emblems from any 67-72 parts vendor. __________________ I'm on the Instagram- @Gearhead_Kevin

02-20-2009, 07:09 AM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: I saw a neat truck today... there's a bunch of stuff that isn't 'right' on that truck. the guy is talkin out his tail pipe. The 454 isn't original, nor is it dealer installed.... unless it was his crack dealer anyways.

02-20-2009, 07:19 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: I saw a neat truck today... I like it,but...Is it a rare Harley Davidson model,too? The 454 prolly came out of the truck the tow hooks came off.He prolly bought the emblems when he bought the dash bezel.That guy must use Ebay for his educater.we all saw that sale with the "original" 427.I know one thing,I don`t care how shiney or snazzy such a rare truck is.But,what self-respecting rare factory optioned Chevy truck owner would run a messed up Ford hubcap?Oy vey.... __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 02-20-2009 at 07:24 AM.

02-20-2009, 09:43 AM	#11
3quartertime My Mistress the Sea Join Date: Feb 2005 Location: Bradenton, FL. Posts: 412	Re: I saw a neat truck today... I certainly don't have the knowledge to comment on the if's involved here, but it's kinda strange to me that the guy would take the time to install all of the desirable options and not have a cheapo paint job done at least. Even with non original stuff installed a rust free body is worth enough to protect it with some cheap paint... __________________ *,,,they'd look alot better as beer cans...* '71 K20 350/350 Rusty but trusty... gone '70 C20... gone '88 K1500... gone '90 C1500... gone '91 C2500... gone '95 C3500 6.5L Dually love this one!...

02-20-2009, 10:14 AM	#12
monte0185 Registered User Join Date: Oct 2008 Location: Brighton, TN Posts: 1,267	Re: I saw a neat truck today... I would say the PO that sold him the truck sold him that line of BULL*** to sell him the truck at the outragous price he paid for it. Not that i know this for sure but most people that have to brag alot really dont know what their talking about. Been my experience anyway. __________________ A computer once beat me at chess, but it was no match for me at kick boxing. Duct tape is like the force. It has a light side, a dark side, and it holds the world together.

02-20-2009, 10:24 AM	#13
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: I saw a neat truck today... It is a neat truck, but no big blocks in 4x4s, and no 454s in these trucks. The towhooks are 73 and newer. The vacuum dash is out of a bigger truck. I would bet there is no glove box sticker. Still looks pretty clean however. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-20-2009, 10:32 AM	#14
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	Re: I saw a neat truck today... my cousin has a 72 chevy 3/4 ton 4x4 that has had a 402 in it since 72. the original owner bought it and installed a big overhead camper on it, took it to the mountains and didn't like the lack of power from the 350 so when he got home and unloaded the camper, he drove it to a local dealership and had a new 402 put in. we pulled the 402 out when my cousin bought it, did some repairs where they clearanced things with a torch and brought it back to original. by the way, after removing the big block, i had serious doubts that a dealership did the actual swap due to the shoddy workmanship but thats the story the original owner told my cousin. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

02-20-2009, 11:26 AM	#15
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: I saw a neat truck today... Well I dont know enough as to what is orginal or what it came with but all I can say it looks like is a daily driver and I applaud him for it.. thks for sharing. __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

02-20-2009, 10:21 AM	#16
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: I saw a neat truck today... dang, can't see pics at work... guess I need to get back to work then huh? __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

02-20-2009, 11:24 AM	#17
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: I saw a neat truck today... "Custom 20" fender emblems, but Cheyenne Super glove box door... Why not just say he built it the way he (or someone) wanted it instead of making yourself look like a jerk?



Register or Log In To remove these advertisements.

02-20-2009, 11:56 AM	#18
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: I saw a neat truck today... That's a really nice clean straight truck! If he bought it like that and was told it was factory, and it "appeared" factory (hey, it even has the right emblems and all right?) then most people would believe it to be true. Only nuts like us know it isn't If someone showed me a 69 Camaro with an oddball engine in it (something GM actually made back then, I'm not dumb enough to fall for "stock 383"), it looked installed correctly and had the correct badges on the car, I would have no friggin' clue if it was factory or not. But I'm sure camaro nuts would be like, oh you idiot, they NEVER came with that engine! __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 02-20-2009 at 11:59 AM.

02-20-2009, 01:09 PM	#20
Stock72c10 classic=of recognized value Join Date: Sep 2008 Location: Wichita, KS Posts: 317	Re: I saw a neat truck today... If you are gonna make up a story, make it good. Install a fancy horn and say it was the original Dukes of Hazzard truck before they decided to go with a Charger

02-20-2009, 01:31 PM	#21
jbristo67 resident oilfield trash Join Date: Jan 2009 Location: Lubbock TX Posts: 1,465	Re: I saw a neat truck today... I could Get a 502 emblem that looks just as stock as that doesnt mean they came with a 502 Either __________________ 1967 SWB C10 396/400 factory air factory tach (sadly had to send to a new home) 1986 Honda 70 Fourtrax 1991 Chevrolet K5 blazer 2wd 1982 Mastercraft Pro Star 190 Stars and Stripes 2002 Chevrolet Tahoe 2011 Nissan Armada Last edited by jbristo67; 02-20-2009 at 01:48 PM.

02-21-2009, 01:09 AM	#22
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: I saw a neat truck today... Good thing I didn't advertise this thread as "all original rare factory options" truck, You purists woulda hung me.... notice I said "I didn't know they did a factory 454... ...I was really wanting to peek at the glove box listing" Reason I was drooling... I would love to have this truck, not because of it originality (or lack of) but due to, If I built a 4x4, thats what I'd like to have & rust free to boot. My thoughts.... I believe the truck has been repainted and made to look used, So is it an original rust free? I don't think so (but ???). I couldn't tell you a factory tow hook from a fish hook, but.... I thought ya'll would like to see it for what it is, not for what it's not... I'd take it... Oh, and it's got brand new aluminum upper & lower pulleys on it... and he paid cash... hehehe __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White Last edited by 67 cst swb; 02-21-2009 at 01:12 AM.

02-21-2009, 01:55 AM	#23
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: I saw a neat truck today... by the looks of the filthy interior, i don't think that's fake patina on the exterior.

02-21-2009, 07:22 AM	#24
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: I saw a neat truck today... Who is to say the guy didn't have a dealer install that 454. Who! I agree it wouldn't be a option for the masses but if some one wanted it bad enough any good dealer would have jumped on installing it for them. I don't think his story is all truthfull but who is to say. Just because some book says so doesn't mean it's not true. My dad had some stuff installed by dealers back in the 70"s that wasn't in no book. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-21-2009, 07:47 AM	#25
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: I saw a neat truck today... sheesh, sometimes a few just get down right mean pickin!! I say "Hey thanks for the story and pic's" Good DAY __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.