got my engine and tranny.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hewlett2002000 · 02-27-2009, 12:39 AM

well i went and picked up my engine and tranny and discovered that the tranny is a 4l80e not a 4l60e. so i got a 6.0l vortec and a 4l80e with the computer and harness and all accessories ready to drop in for $900. i think i got a darn good deal. plus it has headers on it already!!!! i just hope they fit between the frame rails. they cut a few odd and end wires pulling the engine and harness. im gonna trace them down and find out what they are tomorrow. i have wiring diagrams and ecm pinouts to go by. i have a couple questions. firstly how many 02 sensors were on it? theres only one up front in the drivers side pipe. so i think one front sensor is missing. i know the rear ones are missing but they wont be used anyway. secondly how can i add controls in the cab and keep the cruise? heres some pics in a photobucket album. lemme know what you think and if yall think i got a good deal.
thanks,
John

http://s226.photobucket.com/albums/d...oint0%204l80e/

jason65 · 02-27-2009, 12:48 AM

Congrats. Good score. Keep us posted on the step by step.

**Captainfab** · 02-27-2009, 02:08 AM

That looks like a good deal. So I guess you didn't get the whole truck as originally planned? Hopefully you got everything you need to get the 6.0 running. What'cha going to do for a speedo?

hewlett2002000 · 02-27-2009, 03:17 AM

im going with aftermarket gauges. ive been eying this panel from nordskog for the simple fact that my cadillac has spoiled me to digital gauges. lol i read somewhere that that you still need to get a signal converter from dakota digital for it to work right. idk yet though.
John

**scotts62** · 02-27-2009, 09:39 AM

Heck yeah thats all going to be a sweet setup! Keep us posted up with the progress

**ChiefRocka** · 02-27-2009, 10:03 AM

TimE · 02-27-2009, 03:49 PM

That sounds like a really good deal for a 6.0/4l80e. I was hoping to have my 5.3 to the point of cranking by now but I decided to pull the cab and the snowball started rolling...

Keep us posted on your progress!

**TR65** · 02-27-2009, 09:39 PM

Hewlett,

Here is how I added cruise to my steering column.

http://67-72chevytrucks.com/vboard/s...d.php?t=324015

I suppose that you have the cruise actuator with the engine. I see you have the fuse block, that will help a lot.

Good luck,

TR

shortbed70 · 02-27-2009, 10:05 PM

Nice buy...

02-27-2009, 12:39 AM	#1
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	got my engine and tranny.... well i went and picked up my engine and tranny and discovered that the tranny is a 4l80e not a 4l60e. so i got a 6.0l vortec and a 4l80e with the computer and harness and all accessories ready to drop in for $900. i think i got a darn good deal. plus it has headers on it already!!!! i just hope they fit between the frame rails. they cut a few odd and end wires pulling the engine and harness. im gonna trace them down and find out what they are tomorrow. i have wiring diagrams and ecm pinouts to go by. i have a couple questions. firstly how many 02 sensors were on it? theres only one up front in the drivers side pipe. so i think one front sensor is missing. i know the rear ones are missing but they wont be used anyway. secondly how can i add controls in the cab and keep the cruise? heres some pics in a photobucket album. lemme know what you think and if yall think i got a good deal. thanks, John http://s226.photobucket.com/albums/d...oint0%204l80e/ __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

02-27-2009, 12:48 AM	#2
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: got my engine and tranny.... Congrats. Good score. Keep us posted on the step by step.

02-27-2009, 02:08 AM	#3
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: got my engine and tranny.... That looks like a good deal. So I guess you didn't get the whole truck as originally planned? Hopefully you got everything you need to get the 6.0 running. What'cha going to do for a speedo? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

02-27-2009, 03:17 AM	#4
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: got my engine and tranny.... im going with aftermarket gauges. ive been eying this panel from nordskog for the simple fact that my cadillac has spoiled me to digital gauges. lol i read somewhere that that you still need to get a signal converter from dakota digital for it to work right. idk yet though. John Attached Images __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

02-27-2009, 09:39 AM	#5
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: got my engine and tranny.... Heck yeah thats all going to be a sweet setup! Keep us posted up with the progress __________________ Scott 93 crew cab build Project 62

02-27-2009, 10:03 AM	#6
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: got my engine and tranny.... __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

02-27-2009, 03:49 PM	#7
TimE Hey Y'all!! Join Date: Dec 2007 Location: Bay Minette, Alabama Posts: 1,755	Re: got my engine and tranny.... That sounds like a really good deal for a 6.0/4l80e. I was hoping to have my 5.3 to the point of cranking by now but I decided to pull the cab and the snowball started rolling... Keep us posted on your progress! __________________ Just hopin' I live long enough to finish something!!!

02-27-2009, 09:39 PM	#8
TR65 Senior Member Join Date: Nov 2007 Location: Greenville, SC Posts: 873	Re: got my engine and tranny.... Hewlett, Here is how I added cruise to my steering column. http://67-72chevytrucks.com/vboard/s...d.php?t=324015 I suppose that you have the cruise actuator with the engine. I see you have the fuse block, that will help a lot. Good luck, TR __________________ 1965 C10 SWB Fleet Two owner LS2 Swap Thread http://67-72chevytrucks.com/vboard/s...d.php?t=413880

02-27-2009, 10:05 PM	#9
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: got my engine and tranny.... Nice buy... __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.