Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
03-12-2009, 04:51 PM | #1 |
profeshinaly unimployed
Join Date: Dec 2008
Location: hazlehurst, GA
Posts: 1,232
|
Im about to call it quits
Im about to call it quits when it comes to my truck i dint start it for a few days like 3. and i went out there to start it and it dint. So i poured a little gas into the carb and it would only stay started long enough to burn the fuel in the carb then even with me pushing the gas pedal it wouldn't stay on so i went out and bought a new gas pump and I'm purity sure i put it in right but yet still nothing....I'm so angry...and i just don't know what to try next I'm at wits end
__________________
"having mud flaps is like asking for a smaller trophy" |
03-12-2009, 05:04 PM | #2 |
Blaze-Air
Join Date: Nov 2008
Location: Virginia
Posts: 1,117
|
Re: Im about to call it quits
Have you changed fuel filter? With motor off, look down carb and see if gas squirts while pushing throttle linkage. You may have a blockage. There are many things it could be.
|
03-12-2009, 07:08 PM | #3 |
profeshinaly unimployed
Join Date: Dec 2008
Location: hazlehurst, GA
Posts: 1,232
|
Re: Im about to call it quits
thats a good idea i think ima try that tomarow
__________________
"having mud flaps is like asking for a smaller trophy" |
03-12-2009, 08:54 PM | #4 |
Senior Member
Join Date: May 2004
Location: Caldwell,Tx.
Posts: 3,648
|
Re: Im about to call it quits
Got any gas in it ?
Frank
__________________
Born and proudly residing in a Red State ! |
03-12-2009, 09:16 PM | #5 |
profeshinaly unimployed
Join Date: Dec 2008
Location: hazlehurst, GA
Posts: 1,232
|
Re: Im about to call it quits
yeah
__________________
"having mud flaps is like asking for a smaller trophy" |
03-12-2009, 09:21 PM | #6 |
Account Suspended
Join Date: Dec 2007
Location: Unnapreciative, Trollville
Posts: 2,079
|
Re: Im about to call it quits
Ahhh don't give up, the next thing you buy will run worse... It's an old truck, it'll get better. If the engine turns over without making any weird noises, you're way ahead of a lot of people.
Last edited by 78 Chevyrado; 03-12-2009 at 09:22 PM. |
03-12-2009, 09:40 PM | #7 |
profeshinaly unimployed
Join Date: Dec 2008
Location: hazlehurst, GA
Posts: 1,232
|
Re: Im about to call it quits
i know i love my old truck to death but man its given me some problems and i just not that good enough to fix it
__________________
"having mud flaps is like asking for a smaller trophy" |
03-12-2009, 11:01 PM | #8 |
the pollock
Join Date: May 2008
Location: abilene, texas
Posts: 4,423
|
Re: Im about to call it quits
hey tardo.. think i got my truck so "easy"....
he he he.. i love u man (like a brother not a homo) but it takes time and patience.. check your gas lines.. old ones are sh**.. they are cheap to replace also... pull the rusted clamps off and blow through the line.. etc.. check for blockages.. and BTW a fuel filter... is 4 dollars... take time.. and think it out.. if you got an issue.. we r here for you.. good luck and.."Occam's Razor" (which means) "the MOST SIMPLE solution is ALMOST ALWAYS the answer.. the the "polish solution" (which means) HIT IT WITH A HAMMER UNTIL IT WORKS!
__________________
Jack of ALL trades, Master of none.. (but one... procrastination) Army vet 02-08 RIP El Jay! Miss you brother! http://67-72chevytrucks.com/vboard/s...d.php?t=343538 http://67-72chevytrucks.com/vboard/s...d.php?t=386042 |
03-13-2009, 12:02 AM | #9 |
Account Suspended
Join Date: Dec 2007
Location: Unnapreciative, Trollville
Posts: 2,079
|
Re: Im about to call it quits
best thing you can do, when you can afford it is to buy books. (be careful of internet info just because it's so-so at best unless you know who's typing it, like some of the people on THESE forums you know have good results) buy books on whatever you think you don't know enough about. I have a big collection of car fixing manuals with some dating back to the 40's and newer books too. I have books on cams, exhaust, fuel systems, engine swaps, and whatever else you can think of. they may be $20 or more at a pop but they are gold and you'll have them from here on out for reference. I've read them all cover to cover and still screwed a lot of stuff up. a heck of a lot of my knowledge comes from knowing what not to do (or what i ruined, broke or fried) If you really want to go for car-stuff start out with simpler books and go more advanced as the simpler books become more known to you. but never forget book smarts don't compare with real life experience. remember experiance is the best teacher because she doesn't allow ANY drop-outs.
This is about 1/3 of my books. I got many of them from my dad, but he bought them himself at some point. I don't look at them much now, but I used to use them almost daily. I have seen some of these for cheap on ebay Last edited by 78 Chevyrado; 03-13-2009 at 12:28 AM. |
03-13-2009, 08:13 AM | #10 |
profeshinaly unimployed
Join Date: Dec 2008
Location: hazlehurst, GA
Posts: 1,232
|
Re: Im about to call it quits
well the lines are purity cracked up could that be it
__________________
"having mud flaps is like asking for a smaller trophy" |
03-13-2009, 08:42 AM | #11 |
Phone's ringin Dude.
Join Date: Mar 2007
Location: Colorado Springs
Posts: 1,426
|
Re: Im about to call it quits
There's been times where I wanted to push my truck off a cliff. Thank god I live in the plains. Stick with it. As soon as you get this figured out, rest assure, something else will go to hell. Thats the charm of an old truck.
__________________
I pitty the fool with only two headlights!! 2003 SILVERADO SS--THE NEW GIRL 1972 GMC--THE OLD GIRL |
03-13-2009, 08:44 AM | #12 |
dang its hot
Join Date: Nov 2006
Location: frankfort kentucky
Posts: 1,349
|
Re: Im about to call it quits
yep, could be, you obviously have a fuel delivery problem so start at the carb and work your way back, filter, lines, tank etc... keep us posted as we all have been where you are and can help...pictures of carburator, line to pump, the fuel pump etc...
|
03-13-2009, 08:46 AM | #13 |
newbie
Join Date: Feb 2009
Location: Wise Virginia
Posts: 122
|
Re: Im about to call it quits
maybe change the fuel line from the fuel pump to the filter. might be clogged up.
|
03-13-2009, 10:20 AM | #14 |
profeshinaly unimployed
Join Date: Dec 2008
Location: hazlehurst, GA
Posts: 1,232
|
Re: Im about to call it quits
OK my carb isnt clogged up nor is the filter its like brand new anywase but i tested it out how is a good way to see if the pump is working right cuz i might have hooked it up wrong cuz its a real tight fit by them headers and my other question is my new fuel pump has 3 tubes on it what do i do with the third tube i just clogged it up
__________________
"having mud flaps is like asking for a smaller trophy" |
03-13-2009, 10:55 AM | #15 |
Blaze-Air
Join Date: Nov 2008
Location: Virginia
Posts: 1,117
|
Re: Im about to call it quits
Unscrew fuel line from carb...Do NOT smoke...Find a small jar, or use a rag to catch fuel. You need to crank the motor over, and see if gas is flowing through line. Use caution here, as fuel will shoot out if pump is working. Even if you have fuel come through, it may have a low fuel pressure. But first check to see if fuel is flowing...You said you put a new fuel pump on, right...There are many test you need to perform BEFORE you put $$$ into it.
|
03-13-2009, 11:23 AM | #16 |
Registered User
Join Date: Oct 2006
Location: Southern Kalifornia
Posts: 3,066
|
Re: Im about to call it quits
There are a few tests you can do that are very simple.
1)disconnect all lines to the pump. 2)hook up a hose to the tank side of the pump long enough to submerge in a can of gas,and put it (hose) in a can of gas. 3)hook up a hose at the carb side of the pump long enough to put into a container of sorts(just to catch the gas) DON'T SMOKE! trun over engine for about 5-10 revolutions,you should have fuel in the catch container. IF SO move to the next step,IF NOT something is wrong with the fuel pump or installation of pump(please explain how you installed the pump) 4)If fuel is pumping,hook up the line from the pump to the carb. Turn engine over for 5-10 revolutions,if it starts,then you have a plugged line from the tank. If it does not start,look down the throat of the carb and give it a couple of pumps. If gas does not come out,your float maybe stuck closed. (A couple of LIGHT taps with a wrench should release the float seat,try again.) IF you DO have gas coming out,check for spark...WITH THE FUEL LINES SECURED! Dont want a fire here. Anyhow,try these steps and you should be golden. Good Luck. -Lance
__________________
------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT |
03-15-2009, 12:20 AM | #17 | |
Registered User
Join Date: Mar 2006
Location: Kansas
Posts: 865
|
Re: Im about to call it quits
Quote:
Far as getting fed up with the truck, that won't do you a bit of good. Any used vehicle will have some kind of issues. So as I see it, you have 2 options. You can buy new with factory guarantee and trade when it runs out, or you can tackle each problem as they come and learn. When you don't know what to do, I know it seems like an insurmountable task. The people on this site KNOW trucks! They are willing to help. What else do you need? |
|
03-15-2009, 04:14 AM | #18 |
Cheyenne Super
Join Date: Nov 2008
Location: Dallas Texas
Posts: 545
|
Re: Im about to call it quits
[QUOTE=89 crew;3197950]Looks like everyone missed this one. The answer is, take the pump back to the store and get the 2 lined pump. The third line is a return to the tank. If your truck isn't plumed for it then they gave you the wrong part. [QUOTE]
That's true, but it still would have pumped fuel, unless the suction was the one plugged. And it is the right part if it had Cali emissions equip. Poke, bypass the selector to the tank with the most fuel. I'm going to PM you my cell number Poke, so we can communicate faster and get this resolved. I can't have people thinking I don't give good tech help. Last edited by heavychevy79; 03-15-2009 at 04:27 AM. |
03-13-2009, 04:41 PM | #19 |
profeshinaly unimployed
Join Date: Dec 2008
Location: hazlehurst, GA
Posts: 1,232
|
Re: Im about to call it quits
well i tested the gas pump(disconnected the line to the carb and put my thumb up to the hole) why my brother cranked it and all i felt come through was air so it has to be some thing before the fuel pump by the way i love this site
__________________
"having mud flaps is like asking for a smaller trophy" |
03-13-2009, 06:21 PM | #20 |
Right on the line, baby!
Join Date: Oct 2003
Location: Phila, PA 19130
Posts: 1,486
|
Re: Im about to call it quits
I know you answered that you have gas, but are you going by the gauge, or have you filled up recently. These gauges go bad.
__________________
83 GMC 406 th400/3.73 Eaton Truetrac posi, headers, x pipe, & racePros. Tubular control arms, lowering rear springs, caltracs. Still ugly, but getting built right, although slowly Click and scroll down for site vendors! Subscribe here! |
03-13-2009, 07:41 PM | #21 |
profeshinaly unimployed
Join Date: Dec 2008
Location: hazlehurst, GA
Posts: 1,232
|
Re: Im about to call it quits
well im going by the gauge but i have 2 tanks and both of them should have a little gas
__________________
"having mud flaps is like asking for a smaller trophy" |
03-13-2009, 07:49 PM | #22 |
Cheyenne Super
Join Date: Nov 2008
Location: Dallas Texas
Posts: 545
|
Re: Im about to call it quits
Sounds like a cracked/broken rubber fuel line (by the tank or selector)
sucking air and not gas. |
03-13-2009, 07:59 PM | #23 |
profeshinaly unimployed
Join Date: Dec 2008
Location: hazlehurst, GA
Posts: 1,232
|
Re: Im about to call it quits
well how much do ya think it would cost to replace this
__________________
"having mud flaps is like asking for a smaller trophy" |
03-13-2009, 08:27 PM | #24 |
Cheyenne Super
Join Date: Nov 2008
Location: Dallas Texas
Posts: 545
|
Re: Im about to call it quits
A beer if you lived next door lol, but if it's the fuel line causing the problem
it's prolly only two or three feet of it that needs replaced, and it's what about $1.79 a foot at autozone? It shouldn't be hard to find the hole or crack where it's leaking, check and make sure before you buy any line, and if you do, take a piece of the old line to make sure you get the right size. Last edited by heavychevy79; 03-13-2009 at 08:31 PM. |
03-13-2009, 08:31 PM | #25 |
profeshinaly unimployed
Join Date: Dec 2008
Location: hazlehurst, GA
Posts: 1,232
|
Re: Im about to call it quits
lol I'd easily split a 24 pack with ya but now is that 2 or 3 feet all the way back to the selector valve
__________________
"having mud flaps is like asking for a smaller trophy" |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|