Wanted: Windshield Molding Clips, 1971 1/2 Ton - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**wesmigletz** · 03-16-2009, 11:46 PM

I'm looking for a complete set of windshield molding clips, and I would also like to find a complete set for the rear window as well. I'm not sure of the proper name, but I need the clips that join the trim pieces in the rubber molding. Two of the rear window trim clips that came with the truck were damaged. I do not have any of the front windhield trim clips.

Wes

Luis_gz06 · 03-17-2009, 02:03 AM

Most parts vendors carry those.
Brotherstrucks is one of them.

**wesmigletz** · 03-17-2009, 10:10 AM

Thank you Luis, I'll check them out.

**wesmigletz** · 03-18-2009, 01:39 AM

I checked brother's Truck and Truck and Car shop on-line, and did not see the clips. The truck and car shop had windshield moldings, but I did not see a listing for clips.

A source for the clips, new or used, would be appreciated.

oldschooler · 03-18-2009, 07:16 AM

Arent the clips made onto the trim? Rich

sleepertruck72 · 03-18-2009, 03:01 PM

Are you referring to the corner pieces and the one for the center that ties the trim together ? If so I have them and I can mail them to you. They are used but they may be able to be polished.

03-16-2009, 11:46 PM	#1
wesmigletz Senior Member Join Date: Feb 2009 Location: Parker, Texas Posts: 685	Wanted: Windshield Molding Clips, 1971 1/2 Ton I'm looking for a complete set of windshield molding clips, and I would also like to find a complete set for the rear window as well. I'm not sure of the proper name, but I need the clips that join the trim pieces in the rubber molding. Two of the rear window trim clips that came with the truck were damaged. I do not have any of the front windhield trim clips. Wes __________________ 1970 2WD K5 1968 Camaro Conv 1967 Chevy SWB 1964 Malibu SS 1957 Corvette Pics www.picturetrail.com/wesmigletz

03-17-2009, 02:03 AM	#2
Luis_gz06 Senior Member Join Date: Feb 2006 Location: Las Vegas Posts: 1,378	Re: Wanted: Windshield Molding Clips, 1971 1/2 Ton Most parts vendors carry those. Brotherstrucks is one of them. __________________ 1972 Chevrolet Blazer 4x4 (Almost done stay tuned) 1970 Chevrolet Pickup Longhorn CST/20 (SOLD)

03-17-2009, 10:10 AM	#3
wesmigletz Senior Member Join Date: Feb 2009 Location: Parker, Texas Posts: 685	Re: Wanted: Windshield Molding Clips, 1971 1/2 Ton Thank you Luis, I'll check them out. __________________ 1970 2WD K5 1968 Camaro Conv 1967 Chevy SWB 1964 Malibu SS 1957 Corvette Pics www.picturetrail.com/wesmigletz

03-18-2009, 01:39 AM	#4
wesmigletz Senior Member Join Date: Feb 2009 Location: Parker, Texas Posts: 685	Re: Wanted: Windshield Molding Clips, 1971 1/2 Ton I checked brother's Truck and Truck and Car shop on-line, and did not see the clips. The truck and car shop had windshield moldings, but I did not see a listing for clips. A source for the clips, new or used, would be appreciated. __________________ 1970 2WD K5 1968 Camaro Conv 1967 Chevy SWB 1964 Malibu SS 1957 Corvette Pics www.picturetrail.com/wesmigletz

03-18-2009, 07:16 AM	#5
oldschooler Registered User Join Date: Mar 2007 Location: spring grove, Pa. Posts: 538	Re: Wanted: Windshield Molding Clips, 1971 1/2 Ton Arent the clips made onto the trim? Rich

03-18-2009, 03:01 PM	#6
sleepertruck72 Registered User Join Date: Nov 2007 Location: Turlock California 95380 Posts: 2,075	Re: Wanted: Windshield Molding Clips, 1971 1/2 Ton Are you referring to the corner pieces and the one for the center that ties the trim together ? If so I have them and I can mail them to you. They are used but they may be able to be polished. __________________ 72 C20 Longbed 05 1500 Z71

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.