The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-23-2009, 08:27 PM   #1
SCOTTMO
powdercoater
 
Join Date: Dec 2008
Location: mesa,az
Posts: 203
Ign cyl

Lost the keys to the ign,any easy ideas on how to get the ign cyl out w/o
having a key to turn it while pushing in on the release pin

thx scott
SCOTTMO is offline   Reply With Quote
Old 03-23-2009, 08:35 PM   #2
DtownSteve
Registered User
 
Join Date: Jul 2008
Location: Chesterfield, MI
Posts: 35
Re: Ign cyl

Just come here to Detroit and ask any guy on any given corner and I'm sure they can help you out...

Seriously though, I'm assuming you're avoiding calling a locksmith?
DtownSteve is offline   Reply With Quote
Old 03-23-2009, 08:37 PM   #3
LockDoc
The Older Generation


 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,772
Re: Ign cyl

-
Take the passenger side door lock out and take it to a locksmith. There should be a code # stamped into the door lock and he can make a key from that code # that will fit the ignition. If you don't have a locksmith close you can PM me the code number and I will make a key and send it to you. The cost would be 5 bucks shipped.... The code number would be similar to the one in the picture.

This works only if the locks are are original or were all replaced at the same time.

If you have a locksmith come to your place and make a key it will probably be $45 minimum.

LockDoc
Attached Images
 
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-

Last edited by LockDoc; 03-23-2009 at 08:47 PM.
LockDoc is offline   Reply With Quote
Old 03-24-2009, 10:51 AM   #4
SCOTTMO
powdercoater
 
Join Date: Dec 2008
Location: mesa,az
Posts: 203
Re: Ign cyl

Quote:
Originally Posted by LockDoc View Post
-
Take the passenger side door lock out and take it to a locksmith. There should be a code # stamped into the door lock and he can make a key from that code # that will fit the ignition. If you don't have a locksmith close you can PM me the code number and I will make a key and send it to you. The cost would be 5 bucks shipped.... The code number would be similar to the one in the picture.

This works only if the locks are are original or were all replaced at the same time.

If you have a locksmith come to your place and make a key it will probably be $45 minimum.

LockDoc
thx leon
i did a frame up restro on this truck back in 97 and all the cyl's were replaced
at the same time.this truck has been in storage for the last 5 years.
i have a new ign cyl and switch already that i got from my ac/delco dist for
23.00.
i will ck my
door cyl this weekend and let you know,otherwise i will just drill
out the ign cyl so i can remove it from the bezel

scott
SCOTTMO is offline   Reply With Quote
Old 03-24-2009, 11:39 AM   #5
LockDoc
The Older Generation


 
LockDoc's Avatar
 
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,772
Re: Ign cyl

Quote:
Originally Posted by SCOTTMO View Post
thx leon
i did a frame up restro on this truck back in 97 and all the cyl's were replaced
at the same time.this truck has been in storage for the last 5 years.
i have a new ign cyl and switch already that i got from my ac/delco dist for
23.00.
i will ck my
door cyl this weekend and let you know,otherwise i will just drill
out the ign cyl so i can remove it from the bezel

scott
If you aren't worried about the cylinder try peeling the stainless off of the front of it. Sometimes the bezel will unscrew if you get that off.

LockDoc
__________________
Leon

Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles

(My Dually Pickup Project Thread)

http://67-72chevytrucks.com/vboard/s...d.php?t=829820

-
LockDoc is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:55 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com