1st Gen. Engine X-member 69-72 Full Size Chevy/GMC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CDA 455 · 03-29-2009, 10:21 PM

DIY4X crossmember never installed.

This is a complete kit that allows you to get rid of the old school engine mounts and upgrade to a better design all the way around. Oil pan access is a snap, pull the crossmember from the frame mount boxes and drop the pan with ease. All necessary hardware is included. Construction is primarily 1/4" thick steel.

$180 shipped.

Located in Boise, ID

CDA 455 · 03-31-2009, 06:53 PM

Ttt

CDA 455 · 04-01-2009, 03:12 PM

Ttt

wild wille · 04-01-2009, 05:01 PM

Do you have a pic of one installed?

vtblazer · 04-01-2009, 05:26 PM

...

CDA 455 · 04-02-2009, 08:22 AM

Ttt

CDA 455 · 04-03-2009, 01:25 PM

Quote:

Originally Posted by CDA 455

DIY4X crossmember never installed.

This is a complete kit that allows you to get rid of the old school engine mounts and upgrade to a better design all the way around. Oil pan access is a snap, pull the crossmember from the frame mount boxes and drop the pan with ease. All necessary hardware is included. Construction is primarily 1/4" thick steel.

$180 shipped.

Located in Boise, ID

Make an offer.

CDA 455 · 04-04-2009, 03:41 PM

Quote:

Originally Posted by cda 455

diy4x crossmember never installed.

This is a complete kit that allows you to get rid of the old school engine mounts and upgrade to a better design all the way around. Oil pan access is a snap, pull the crossmember from the frame mount boxes and drop the pan with ease. All necessary hardware is included. Construction is primarily 1/4" thick steel.

$180 shipped.

Located in boise, id

ttt

71stroker · 04-06-2009, 05:04 PM

I am very interested in the crossmember. I was wondering when you purchased this kit or how old it is or if it is the updated one? I know they have been updated since they first made them because of oil pan clearance issues. I have to replace mine cause the p.o. torched half of mine off to run 2wd shorty headers and it doesnt provide enough strength with a big lift and 37'' tires. Thanks for your time.
71stroker

CDA 455 · 04-07-2009, 12:23 PM

Quote:

Originally Posted by 71stroker

I am very interested in the crossmember. I was wondering when you purchased this kit or how old it is or if it is the updated one? I know they have been updated since they first made them because of oil pan clearance issues. I have to replace mine cause the p.o. torched half of mine off to run 2wd shorty headers and it doesnt provide enough strength with a big lift and 37'' tires. Thanks for your time.
71stroker

I bought it a year ago. March or April.

71stroker · 04-07-2009, 03:10 PM

Thanks for the info. I would like to purchase this from you as soon as possible. Let me know how to pay and when it can ship and we'll go from there. Thanks so much.

CDA 455 · 04-09-2009, 06:51 AM

Quote:

Originally Posted by 71stroker

Thanks for the info. I would like to purchase this from you as soon as possible. Let me know how to pay and when it can ship and we'll go from there. Thanks so much.

You have a PM.

03-29-2009, 10:21 PM	#1
CDA 455 MidlifeCrisisUnderWay Join Date: Jul 2007 Location: 43rd State Posts: 139	1st Gen. Engine X-member 69-72 Full Size Chevy/GMC DIY4X crossmember never installed. This is a complete kit that allows you to get rid of the old school engine mounts and upgrade to a better design all the way around. Oil pan access is a snap, pull the crossmember from the frame mount boxes and drop the pan with ease. All necessary hardware is included. Construction is primarily 1/4" thick steel. $180 shipped. Located in Boise, ID Attached Images __________________ DIY4X 1972 CST Blazer <---sold

03-31-2009, 06:53 PM	#2
CDA 455 MidlifeCrisisUnderWay Join Date: Jul 2007 Location: 43rd State Posts: 139	Re: 1st Gen. Engine X-member 69-72 Full Size Chevy/GMC Ttt __________________ DIY4X 1972 CST Blazer <---sold

04-01-2009, 03:12 PM	#3
CDA 455 MidlifeCrisisUnderWay Join Date: Jul 2007 Location: 43rd State Posts: 139	Re: 1st Gen. Engine X-member 69-72 Full Size Chevy/GMC Ttt __________________ DIY4X 1972 CST Blazer <---sold

04-01-2009, 05:01 PM	#4
wild wille Registered User Join Date: Sep 2008 Location: Megargel Texas Posts: 149	Re: 1st Gen. Engine X-member 69-72 Full Size Chevy/GMC Do you have a pic of one installed?

04-01-2009, 05:26 PM	#5
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: 1st Gen. Engine X-member 69-72 Full Size Chevy/GMC ... Attached Images

04-02-2009, 08:22 AM	#6
CDA 455 MidlifeCrisisUnderWay Join Date: Jul 2007 Location: 43rd State Posts: 139	Re: 1st Gen. Engine X-member 69-72 Full Size Chevy/GMC Ttt __________________ DIY4X 1972 CST Blazer <---sold

04-06-2009, 05:04 PM	#9
71stroker Registered User Join Date: Apr 2008 Location: Burney, California Posts: 50	Re: 1st Gen. Engine X-member 69-72 Full Size Chevy/GMC I am very interested in the crossmember. I was wondering when you purchased this kit or how old it is or if it is the updated one? I know they have been updated since they first made them because of oil pan clearance issues. I have to replace mine cause the p.o. torched half of mine off to run 2wd shorty headers and it doesnt provide enough strength with a big lift and 37'' tires. Thanks for your time. 71stroker

04-07-2009, 03:10 PM	#11
71stroker Registered User Join Date: Apr 2008 Location: Burney, California Posts: 50	Re: 1st Gen. Engine X-member 69-72 Full Size Chevy/GMC Thanks for the info. I would like to purchase this from you as soon as possible. Let me know how to pay and when it can ship and we'll go from there. Thanks so much.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.