Never believe what you see on TV...duh! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stllookn · 12-21-2002, 01:36 PM

My son came to this realization after the second day (part time) installing a flip kit in the rear of his '77 as we hit 40,000lb on a hydraulic press removing leaf spring bushings so he could put in new Energy Systems bushings (which did not fit and had to be modified). This was not the end of it...had to torch the front spring bracket off since the bolt could not be removed. Had extensively modify the shock entensions as well.

I told him that is why it takes them a week to film a show, the shop is never dirty, nobody swears and questions the lineage of the designers or suppliers and nobody ever throws a wrench! It is a fantasy...welcome to the real world baby...LOL!

78SilveradoSWB · 12-21-2002, 02:37 PM

Must have been watching "Truckin" on the new TNN. I am going to skip that part of the fun in my restoration project and leave it to the expert so they can have all the fun.

bill_ont_canada · 12-22-2002, 01:24 AM

Quote:

I told him that is why it takes them a week to film a show, the shop is never dirty, nobody swears and questions the lineage of the designers or suppliers and nobody ever throws a wrench! It is a fantasy...welcome to the real world baby...LOL!

I hear ya stllookn BUT... wouldn't you love to see the out takes from some of those shows.???

I have never seen a guy who works on Trucks lafffff as much as the guy on TRUCKS TV show...I don't know if he is just confused or just don't understand the whole situation.

(PS I don't laffff much when I'm trying to undo spring shackles)

gchemist · 12-22-2002, 11:12 PM

Cool story. I'm sure next time he'll think about adding more time to the project.

stllookn · 12-23-2002, 03:17 AM

gchemist...got the front drop spindles and springs installed today without a hitch...unless you consider the 15 inch front Cragers not being able to clear the disk brake calipers...LOL! Problem is I will have to drive him to work until he finds or buys some front wheels and tires that will fit! KIDS...what are you going to do with them?

c10scotty · 12-23-2002, 11:01 AM

Quote:

Originally posted by bill_ont_canada
I have never seen a guy who works on Trucks lafffff as much as the guy on TRUCKS TV show

ya, or say "cool" as much as he does. lol, its a good show though, they build some pretty cool stuff even if it is unrealistic.

12-21-2002, 01:36 PM	#1
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Never believe what you see on TV...duh! My son came to this realization after the second day (part time) installing a flip kit in the rear of his '77 as we hit 40,000lb on a hydraulic press removing leaf spring bushings so he could put in new Energy Systems bushings (which did not fit and had to be modified). This was not the end of it...had to torch the front spring bracket off since the bolt could not be removed. Had extensively modify the shock entensions as well. I told him that is why it takes them a week to film a show, the shop is never dirty, nobody swears and questions the lineage of the designers or suppliers and nobody ever throws a wrench! It is a fantasy...welcome to the real world baby...LOL! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

12-22-2002, 11:12 PM	#4
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Cool story. I'm sure next time he'll think about adding more time to the project. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

12-23-2002, 03:17 AM	#5
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	gchemist...got the front drop spindles and springs installed today without a hitch...unless you consider the 15 inch front Cragers not being able to clear the disk brake calipers...LOL! Problem is I will have to drive him to work until he finds or buys some front wheels and tires that will fit! KIDS...what are you going to do with them? __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

12-21-2002, 02:37 PM	#2
78SilveradoSWB Senior Member Join Date: Apr 2002 Location: Beaverton, OR Posts: 1,615	Must have been watching "Truckin" on the new TNN. I am going to skip that part of the fun in my restoration project and leave it to the expert so they can have all the fun.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.