The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-01-2009, 11:09 PM   #1
S3B3AST
Registered User
 
S3B3AST's Avatar
 
Join Date: Jan 2009
Location: Ceres, California
Posts: 37
Need help removing window...

Im trying to remove the back window in my 71 cab, but Im having a hard time getting it out, along with the other windows...any ideas, how tos, or advice? Thanks
__________________
1971 Chevy 4x4 short bed fleet side
S3B3AST is offline   Reply With Quote
Old 04-02-2009, 12:10 AM   #2
blakeaz33
Registered User
 
blakeaz33's Avatar
 
Join Date: Nov 2007
Location: Scottsdale, AZ
Posts: 152
Re: Need help removing window...

I've taken several out and reinstalled them with the original gasket, just did this with my 68 to remove the cab with the lift I used. I'm guessing you want to save the gasket, old gaskets dry out and rip easily so if it is in bad shape you may need a new one. Start in one of the top corners and pull the inside lip of the gasket back while applying pressure on the glass, all you want to do is get the edge of of the gasket on the other side of the pinch weld and work your way across the top of the window to the opposite corner. You can use a hook tool or screw driver to help get it started, glass tools for this are plastic. Once you get the top edges out the rest is easy, the back is tempered glass and can take much more pressure than the laminated windshields before breaking. If your gasket is dry rotted and you're using a new one just cut it out.
blakeaz33 is offline   Reply With Quote
Old 04-02-2009, 12:29 AM   #3
S3B3AST
Registered User
 
S3B3AST's Avatar
 
Join Date: Jan 2009
Location: Ceres, California
Posts: 37
Re: Need help removing window...

Sounds easy, what about the front window. The seal is reuseable if I don't damage it?
__________________
1971 Chevy 4x4 short bed fleet side
S3B3AST is offline   Reply With Quote
Old 04-02-2009, 12:35 AM   #4
blakeaz33
Registered User
 
blakeaz33's Avatar
 
Join Date: Nov 2007
Location: Scottsdale, AZ
Posts: 152
Re: Need help removing window...

The front works the same way, start from the inside on a top corner and work across the top to the other corner. I would start with the back glass, the windshield will break much easier than the back glass - the windshield should come out easy if there hasn't been any type of sealant applied between the gasket and the pinchweld. Just take your time and don't push too hard, will work best if it is not too cold out also.
blakeaz33 is offline   Reply With Quote
Old 04-02-2009, 01:23 AM   #5
S3B3AST
Registered User
 
S3B3AST's Avatar
 
Join Date: Jan 2009
Location: Ceres, California
Posts: 37
Re: Need help removing window...

All right thanks bud
__________________
1971 Chevy 4x4 short bed fleet side
S3B3AST is offline   Reply With Quote
Old 04-02-2009, 03:02 AM   #6
chopper103in
Registered User
 
chopper103in's Avatar
 
Join Date: Dec 2006
Location: sycamore,il
Posts: 163
Re: Need help removing window...

why try to reuse a 38 year old piece of rubber-----i say cut it out with a knife and buy new seals
__________________
69 chevy swb
2.5 in droped spindle with 1 coil cut--5 in dropped spring in rear
5 in dropped spring
307 repaced soon with 350
3sp on tree soon replaced with 350 tubo

06 monte carlo
94 chrysler town & country---198K
84 jag xj6
76 sportster---57 panhead
chopper103in is offline   Reply With Quote
Old 04-02-2009, 09:24 AM   #7
sneakysnake
It's a catastrophic success.
 
sneakysnake's Avatar
 
Join Date: Jan 2003
Location: Oklahoma
Posts: 2,077
Re: Need help removing window...

Quote:
Originally Posted by chopper103in View Post
why try to reuse a 38 year old piece of rubber-----i say cut it out with a knife and buy new seals
I agree...You think they are good until you compare them to a new one or play hell trying to put the glass back in with stiff rubber. Its time and money well spent for new.
sneakysnake is offline   Reply With Quote
Old 04-02-2009, 04:13 PM   #8
S3B3AST
Registered User
 
S3B3AST's Avatar
 
Join Date: Jan 2009
Location: Ceres, California
Posts: 37
Re: Need help removing window...

Did you know that one seal cost $200? seen one for less let me know, it should be new, your right
__________________
1971 Chevy 4x4 short bed fleet side
S3B3AST is offline   Reply With Quote
Old 04-02-2009, 04:36 PM   #9
Ram-Man
Senior Member
 
Ram-Man's Avatar
 
Join Date: Aug 2006
Location: Minnesota
Posts: 943
Re: Need help removing window...

Quote:
Originally Posted by S3B3AST View Post
Did you know that one seal cost $200? seen one for less let me know, it should be new, your right
You can buy those for about $30 each from most suppliers. I say cut it out.
__________________
Porterbuilt 8 Lugger
http://67-72chevytrucks.com/vboard/s...d.php?t=691739
Ram-Man is offline   Reply With Quote
Old 04-02-2009, 04:40 PM   #10
Green Machine
Senior Member
 
Green Machine's Avatar
 
Join Date: Jul 2004
Location: Estherville, Iowa
Posts: 3,371
Re: Need help removing window...

Check this out for example -

http://www.classicparts.com/1967-72-...ctinfo/01-133/
__________________
1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103
1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285
1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894
2001 GMC Sierra 1500 C3 6.0
Green Machine is offline   Reply With Quote
Old 04-03-2009, 02:35 AM   #11
S3B3AST
Registered User
 
S3B3AST's Avatar
 
Join Date: Jan 2009
Location: Ceres, California
Posts: 37
Re: Need help removing window...

Wow did I read that price wrong. thank you guys
__________________
1971 Chevy 4x4 short bed fleet side
S3B3AST is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:45 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com