Any difference between... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69c10stepside · 12-26-2002, 07:51 PM

swb stepside fenders and lwb stepside fenders? a friend of a friend has a "good lwb stepside bed" for 150 bucks.. just wondering if the fenders would interchange.

thanks,
frank

chevy_fatman · 12-26-2002, 07:58 PM

I believe they're the same, the only difference comes with the steps, being longer in a long bed, fenders from a long bed should fit in a short bed

69c10stepside · 12-26-2002, 08:00 PM

thanks for the reply

*67/72junkie* · 12-26-2002, 08:32 PM

Only differance is step and long side panel.

and wood &strips of course.

69c10stepside · 12-26-2002, 08:41 PM

floor in my short step bed is messed up anyways.. thinking about doing some diamond tred plate or etc in it.. i just had some rusted fenders and this bed is alot cheaper then buying replacements

pat · 12-26-2002, 10:32 PM

My truck has the rotten wood floor covered by sheets of metal welded in(looks crappy, holes everywhere) and I thought about the diamond plate too. How do you go about putting diamond plate in the bed?

69c10stepside · 12-26-2002, 10:49 PM

I'm debating ideas on how to do it.. more then likely just going to make spacers come up around all sides to make it all sit even then just lay it in and bolt it down

12-26-2002, 07:51 PM	#1
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	Any difference between... swb stepside fenders and lwb stepside fenders? a friend of a friend has a "good lwb stepside bed" for 150 bucks.. just wondering if the fenders would interchange. thanks, frank __________________ 1989 GMC C1500 ECSB 1972 Gmc Jimmy 1972 Chevy C10 SWB Sold

12-26-2002, 07:58 PM	#2
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,621	I believe they're the same, the only difference comes with the steps, being longer in a long bed, fenders from a long bed should fit in a short bed __________________ Paul How do you make the invisible, visible?.........You take it away.

12-26-2002, 08:00 PM	#3
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	thanks for the reply __________________ 1989 GMC C1500 ECSB 1972 Gmc Jimmy 1972 Chevy C10 SWB Sold

12-26-2002, 08:32 PM	#4
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	bed Only differance is step and long side panel. and wood &strips of course.

12-26-2002, 08:41 PM	#5
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	floor in my short step bed is messed up anyways.. thinking about doing some diamond tred plate or etc in it.. i just had some rusted fenders and this bed is alot cheaper then buying replacements __________________ 1989 GMC C1500 ECSB 1972 Gmc Jimmy 1972 Chevy C10 SWB Sold

12-26-2002, 10:32 PM	#6
pat Senior Member Join Date: Jul 2002 Location: Lindsay, TX Posts: 1,245	My truck has the rotten wood floor covered by sheets of metal welded in(looks crappy, holes everywhere) and I thought about the diamond plate too. How do you go about putting diamond plate in the bed? __________________ 68 Chevy 383/350 w/shift kit, 380hp/425ft-lbs, 4.5/5 drop, 17" TT2s 64 Cadillac Sedan DeVille

12-26-2002, 10:49 PM	#7
69c10stepside Large Member Join Date: Jun 2002 Location: Northwest Arkansas Posts: 747	I'm debating ideas on how to do it.. more then likely just going to make spacers come up around all sides to make it all sit even then just lay it in and bolt it down __________________ 1989 GMC C1500 ECSB 1972 Gmc Jimmy 1972 Chevy C10 SWB Sold

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.