Patch Panels What Other Parts Do I Need? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Normy71 · 05-02-2009, 11:56 AM

Hi All Starting to do some cab repairs and this is a picture of the rusty cab and the patch panels I already have.
The Passenger side is in the same shape as the drivers side.
What other patch panels/parts do I need to make this a lot easier to complete? I'm interested in the extended inner rockers are they something I should look into? Does anyone have pictures of them?
Thanks
What I have is
2 outer rockers L&R
4 slip on cab supports L&R
2 Cab corners L&R
2 front floor patch panels L&R

red71c10 · 05-02-2009, 01:06 PM

I'd say you are at least going to need the inner rocker panels which include the outer floor sections. By the time you tear into it, you might need the pillar repair panels too. You can practice on my truck before you start on yours!!

checkmate · 05-02-2009, 01:35 PM

Where did you buy your parts? I have the same project in front of me. I will be doing a bit more than you, but I will need kickers and rockers and such. Thanks for the help.

Normy71 · 05-02-2009, 01:47 PM

checkmate
I'm in Canada got my parts from a friend.
Make sure you check out vendors of this site they will set you up with what you need.
good luck with your repairs!

**Classic Heartbeat** · 05-02-2009, 02:15 PM

From what I can see you need:
Foot well patches
front door front pillar patches
Front cab supports
Rear cab supports
(Throw away the slip overs, they are garbage that will only make an existing problem worce)
I would be tempted to use the floor extentions instead of the front floor halves. They are a better peice and looking at your rust might just be easier to install. If not the floor patches that you have will work, but you will have to fab up some small pieces to fix what the floor section doesn't cover.

Of coarse we sell everything I have listed...

WES

Normy71 · 05-02-2009, 11:24 PM

ttt
More help please!
Thanks

05-02-2009, 11:56 AM	#1
Normy71 Registered User Join Date: Apr 2009 Location: Saskatchewan, Canada Posts: 236	Patch Panels What Other Parts Do I Need? Hi All Starting to do some cab repairs and this is a picture of the rusty cab and the patch panels I already have. The Passenger side is in the same shape as the drivers side. What other patch panels/parts do I need to make this a lot easier to complete? I'm interested in the extended inner rockers are they something I should look into? Does anyone have pictures of them? Thanks What I have is 2 outer rockers L&R 4 slip on cab supports L&R 2 Cab corners L&R 2 front floor patch panels L&R Attached Images __________________ Rolled the dice and lost!! Check Out my 71 build http://67-72chevytrucks.com/vboard/s...d.php?t=375158

05-02-2009, 01:06 PM	#2
red71c10 The Red Menace Join Date: Feb 2009 Location: Roseburg, OR Posts: 577	Re: Patch Panels What Other Parts Do I Need? I'd say you are at least going to need the inner rocker panels which include the outer floor sections. By the time you tear into it, you might need the pillar repair panels too. You can practice on my truck before you start on yours!! __________________ 1971 Custom 10 - 350/350TH - Pwr steering, gauges, Chrome front bumper, Chrome hubcaps, Door edge guards, HD rear springs (current) 1968 C-20 Custom Camper - 350/350TH (orig 327), Pwr steering & brakes, gauges w/tach (former) 1968 C-20 - 307/3sp column (Dad's when I was a kid) "Driving is like coloring. Things get messy if you can't stay inside the lines."

05-02-2009, 01:35 PM	#3
checkmate Registered User Join Date: Apr 2009 Location: Magna, Utah Posts: 5	Re: Patch Panels What Other Parts Do I Need? Where did you buy your parts? I have the same project in front of me. I will be doing a bit more than you, but I will need kickers and rockers and such. Thanks for the help.

05-02-2009, 01:47 PM	#4
Normy71 Registered User Join Date: Apr 2009 Location: Saskatchewan, Canada Posts: 236	Re: Patch Panels What Other Parts Do I Need? checkmate I'm in Canada got my parts from a friend. Make sure you check out vendors of this site they will set you up with what you need. good luck with your repairs! __________________ Rolled the dice and lost!! Check Out my 71 build http://67-72chevytrucks.com/vboard/s...d.php?t=375158

05-02-2009, 02:15 PM	#5
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,768	Re: Patch Panels What Other Parts Do I Need? From what I can see you need: Foot well patches front door front pillar patches Front cab supports Rear cab supports (Throw away the slip overs, they are garbage that will only make an existing problem worce) I would be tempted to use the floor extentions instead of the front floor halves. They are a better peice and looking at your rust might just be easier to install. If not the floor patches that you have will work, but you will have to fab up some small pieces to fix what the floor section doesn't cover. Of coarse we sell everything I have listed... WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

05-02-2009, 11:24 PM	#6
Normy71 Registered User Join Date: Apr 2009 Location: Saskatchewan, Canada Posts: 236	Re: Patch Panels What Other Parts Do I Need? ttt More help please! Thanks __________________ Rolled the dice and lost!! Check Out my 71 build http://67-72chevytrucks.com/vboard/s...d.php?t=375158

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.